Using NO POWER TOOLS and in just a few minutes, you can have your TV mounted to the wall safely and easily! #tvhack#tvmount#homehack
📦 PRODUCTS IN THIS VIDEO 📦 • Hangman Products No Stud TV Hanger Mount TVs up to 55-Inch: https://geni.us/RHJU (Paid Amazon Link) • EZ-Hang by HANGMAN No Stud All Surface TV Mount, 32"-80": https://geni.us/X0fT5 • Monoprice No Stud Hanger TV Mount for 37" - 80" TVs Up to 110lbs: https://geni.us/BpCX6k (Paid Amazon Link)
👍 WANT TO HELP SUPPORT THIS CHANNEL? 👍 Become a channel member! Hit the "Join" button or head to us on Patreon: https://www.patreon.com/lrn2diy
🎬 CHECK OUT THESE VIDEOS! 🎬 • How To Hide Your TV Wires in 30 Minutes - DIY: How to Hide Your TV Wires for $10: How to Fix Holes in Drywall - 4 Easy Methods: How to Mount a TV to the Wall: Simple and Safe Steps: MORE DIY GOODNESS 📲 Visit our website at https://www.lrn2diy.com
📚 TWO FREE AUDIOBOOKS! 📚 To get two free audiobooks from Audible, just follow this link: https://goo.gl/QGFC4QCredit: LRN2DIY
I'm going to show you the absolute easiest way to mount a TV to drywall.
And it does not require a drill. It doesn't require a stud finder.
All you need to do this project is a hammer and maybe a screwdriver to secure it
after. For this project, we're going to be using a no stud TV hanger kit.
Now there are different versions of this and I'll put links to this and others
in the description below. And this supports, it says 26 to 55 inches,
but the actual important factor here is the weight. This holds up to 80 pounds,
which is more than most modern TVs weigh. So before you use this,
be sure to check the weight of your specific TV.
The way this kit works is it uses a plate mounted onto the wall and a
corresponding plate on the TV.
And it basically distributes the weight along the drywall using a bunch of tiny
nails to be able to hold that weight. It's pretty clever and it's dead simple.
To start, we're going to lay the TV down and this is a 65 inch TV.
It weighs about 40 pounds. So this one should be able to mount pretty easily.
And this one,
we're just putting it down on soft carpet to make sure it's protected.
Now this kit works with anything that is up to about a 400 millimeter VESA TV
mount, which is pretty standard or traditional. So you can see here,
I've got a hole that's going to line up right there and then another one right
here. So that's going to work out great. And before I do anything,
I want to test fit the length of the screws that are going to be used.
So I've got a couple of them here.
It's important that you don't use screws that are too long.
So I'm going to test this one out here and we're going to Mount these into the
top of the four holes. So the top two holes on the TV,
you're going to thread this in by hand. And if it bottoms out like that,
that means that screw is too long. So we do not want to use that.
We'll go to the next shortest one and hopefully this one will go all the way in.
Yeah. Okay. So that one can sink all the way down. If you use too long of a screw,
it could damage the screen inside your television.
Just going to use a Phillips screwdriver, secure that in.
So you should feel it pulling snug. You don't want to over tighten it,
but there we go. That's good. And that's not going to go anywhere.
Now while this is on the ground,
you can fish through the little security cable through the hole,
right in the center of the bracket. And if it goes down this far like this,
that's a little too far. We don't want it to be visible underneath the TV.
So what you can do is just tie a little knot in it just to shorten it.
And that's all we're going for. Something like that.
With the TV bracket installed,
we can now install the wall bracket and we're going to slide in a little level
in the middle here, that over here. And all we need are these little,
this little bag of nails that comes with it.
We'll start with our center nail and you can kind of just put it at whatever
height you think it needs to be at. We're going to put ours right here.
We're starting in the center so that we can easily level it.
So I'll use the little bubble here and get it just right.
And once I've got that, I can put in the rest of the nails all along the way.
That went into a stud as well. Okay.
Now make sure you get a second person to help you lift the TV into place and we
just want to slide it into the little slot that we've created there.
Make sure it's lined up side to side.
Our last step for mounting the TV is to tilt the bottom away from the wall,
being careful not to lift while you do that.
And it's helpful sometimes if you just want to grab a box or something that you
can kind of prop in there to help it stay put.
And then here's that secure cable that we grabbed earlier.
And we're just going to use a, the included screw that comes with it.
It's a drywall screw.
And then we can fasten that right to the wall. It doesn't have to be straight.
It just needs to be secure.
And the whole purpose of this is that no one tries to lift it without undoing
this. So it just helps keep everything in place.
Once we got the power put in, this TV is completely mounted and ready to go.
Now there's one last step that really helps.
If you notice there's no wires hanging out.
And so if you want to see how you can hide your TV wires pretty inexpensively
and do it yourself the right way, you can check out this video right here.
Thanks for watching.