Chinese Architectural Brackets

Traditional architecture of countries
159 followers
41 Video Views·Sep 27, 2022
A brief look into the world of Chinese bracket joinery with Richard Wiborg. This is an example corner bracket built from the Temple of Solitary Joy in China. Richard goes into the history and components that comprise what we know as Chinese Bracket joinery.
Source: Richard Wiborg/ Traditional Chinese Architecture
Years ago, I discovered Asian timber framing, which has a tradition that's great and glorious
and a bit different from the Western tradition.
I became interested in Chinese temple building, and what you see here is a replica of a corner
bracket set from a temple entry gate building.
This is from the Temple of Solitary Joy.
It's several hours outside of Beijing in northern China.
It survived 30-some major earthquakes since it was built, and partly that's due to brackets
and a completely different idea about building, which is that buildings are flexible, kind
of like the human body, and when there's earthquake shaking, they can move and dissipate the energy
without absorbing the full shock.
This is the main hall, which houses a 50-foot sculpture of the goddess Guanyin, the goddess
of mercy.
This is the entry gate, or so-called mountain gate, that everybody passes through to enter
the temple grounds.
These are some views of the mountain gate from where this bracket set comes, and you
can see from the different views, the shape of the roof and the feeling of the building
is completely different in each photograph.
This is a beautiful view looking down on the roof, and I think this view really caught
my heart for its simplicity and beauty.
Hard to see, but it's the bracket sets which support the roof, which has such a wide reach,
wide overhang, wide eave beyond the building.
One of the suppositions is that in the early days, the walls were made just of dried clay
and they were very susceptible to rain, so having a wide roof would protect the building
from rain and deterioration.
Of course, a wide roof also provides lots of shade.
Probably the third reason for a wide overhang is a sense of proportion, so that you don't
have a tall, grand building with a little short-brimmed hat on it.
You have something that has a gesture and an appeal to it.
Probably the most dramatic feature inside are two warriors.
I believe that they're to scare away any bad thoughts you might bring and scare away any
bad spirits that might be trying to get in to the temple grounds.
In Chinese, a bracket is called dou gong.
Dou is these small bearing blocks, and gong are beams and tie beams in a horizontal orientation,
and they're kind of interwoven.
In the interweaving and the joining of so many surfaces, you get flexibility and some
friction, and this helps to dissipate any shaking force from an earthquake.
One of the big surprises to me as I began to study bracket sets was that there's only
one thing holding them together, and that's gravity.
So each piece just rests on top of another.
They're often located with little wooden pegs or pins to keep them aligned, but it's really
just gravity.
There's no pegs as in Western timber framing.
All the load from the roof on this bracket set comes back to the main bearing block,
which sits directly on top of a round column.
So this is the base bearing block, and then the small bearing blocks, there are several
different variations, but essentially similar.
There are shaped arms, horizontal arms, that have, it's actually facets, but it looks from
a distance like a curve, or they can have a pointed shape.
So a bracket set is classified in several ways by the number of tiers.
So here we have one, two, three, four, five tiers, and by the number of steps.
So if I rotate this bracket set around, we can see this is the wall plane here, and from
the wall plane, there's one step, two step, and actually three steps out from the building.
So these steps help to bring supporting members so that the roof can reach further out than
if it was just resting on top of the wall beam.
Brackets, you learn the language of brackets, which is the layout, the similarity, most
of the bracket arm pieces are the same dimension, most of the bearing blocks are the same dimension.
The joinery is fairly straightforward, it's often a simple half lap, maybe a housed half
lap, there's some dovetails occasionally.
The joinery, there's I guess an old saying that the bigger the building, the looser the
joinery.
So this is not sort of furniture grade joinery where it has to be perfect and it has to be
forced together.
This is more of a kind of a slip fit, so the joinery just wants to go together, doesn't
want to be sloppy, but you don't want to have to fight it because there's so many things
that have to work together.
You want to have a little bit of flexibility in it.
I'd like to show you how a bracket set's assembled.
So we'll start with the base block.
This is the focal point of the whole bracket set, the bracket set reaches out beyond and
all the weight and load is concentrated on this one piece which sits directly on top
of a column.
So a base block for a corner block will have three pieces crossing, two at a right angle
in the wall plane and then one at a 45 degree angle in the one of the hip.
So we'll start with the first piece, it'll sit in the channel and you can see already
there's a space for a diagonal hip piece.
The second piece in the wall plane captures the first piece and locks in place and finally
the hip captures these two pieces and rests just on a little bit of a corner of the base block.
So now we see the first tier sitting on the base block directly resting on the column
below.
Three pieces, six bearing blocks and twelve floating tenons.
When construction is happening the pieces are assembled one by one and they have to
go in a particular order, they wouldn't be assembled as a whole tier but I'm just showing
you tier by tier what they look like and which pieces are involved.
We have two horizontal beams that lap and I'll orient it.
This is the slot again for the hip line.
These are now, this is centered on the wall, the building's inside, outside of the building
is here.
So these members will be outside of the building.
So it fits underneath it and then this is the hip line piece.
This captures the center, this captures the outboard arms.
Tier two as you can see it's locked into the first tier because of the floating tenons
and the bearing blocks.
Here we have five pieces, number of bearing blocks and you can see the bearing blocks
are cut differently depending on their function.
So this is a standard bearing block.
This is one that's going to receive a member going 45 degrees this way.
This one's going to receive a member coming out in front and this is going to receive
two members that cross over on top of this.
One thing that surprised me is that this detail seems fairly fragile but in fact I don't know
if I've ever seen one that was broken in a real building so it works.
You may notice that there's two sizes of arms.
This is the standard size and this is the large size.
A standard size plus a bearing block equals the same height as the large size.
So here we're using the bearing blocks to gain elevation to equal this and that's basic
to the design of bracket sets.
Now we'll look at the third tier.
Tier two had five main beams.
Tier three has six and what's interesting about tier three among other things is that
you have four beams all crossing at the same point.
So you see it's not very thick at the crossing point but again the fact that the low beams
below it are supporting it gives it strength to bear the weight above.
This is the only tier that has bearing blocks cut at a 45 degree angle and the only tier
that has the shaping on the facets on the end also at a 45 degree angle.
Then this is the second piece, this is the third piece and you can see now again we've
established the channel for the 45 degree hip.
So this is the fourth member and this is the fifth member and so it interlocks out here
and further in and we've still established the channel going through and here is the
hip member and so it has the same detail to lock both intersections, this point being
again the center point of the corner of the wall.
So this is the third tier getting more complex and interesting and heavier.
Okay now we're going to place parts for tier number four on top of tier number three.
Okay here's the first part, here's the standard crossing so these two pieces are in the line
of the wall.
Here's again a hip member crossing at 45 degrees and when you see this kind of rounded shape
it suggests that there's going to be a round purlin coming up.
So I should explain what is a purlin.
So a purlin is a horizontal beam, it can be round, it can be square, it can be rectangular
but typically in Chinese architecture it's a round member.
It can be parallel to the wall, outside the wall, above the wall or inside and rafters
are placed on top of the purlins so the height and the angle of the purlin starts to suggest
the slope of the roof.
These are the small channel members in which the purlins will rest and then this is the
first round purlin and I've attached on it what's called a pillow block and while most
of the rafters rest on the purlin which is a continuous piece around the whole building
when you come to the corner they rest on the pillow block and it creates the rise at the
corner of the roof.
So the roof curves both from eave up to the ridge and it curves across the face of the
building rising towards the ends at the hip and there's a typical half lap joint here
for the round purlins.
So I'll place the first one, second one.
Okay so the tier four is now complete.
This is actually a fairly simple tier.
It sits on top of the wall plane and it's beveled on the top edge so this suggests the
slope of the roof.
If this were a rafter, the rafter would rest on the round purlin on the beam and the wall
plane and then there'll be an interior purlin which will line up on the same slope.
So this is the second member mirror image.
Again the channel for the hip and here is the hip member.
So that's tier five.
So in terms of the wall plane, this is the top of the bracket set.
There'll be two more tiers on the inside of the building that hold an interior purlin.
In Chinese buildings the rafters don't go all the way from the ridge to the eave.
They're short and they just go from purlin to purlin or purlin to beam and that way as
the purlin or beam slope changes, the rafters make a segmented curve and that's how they
create the curved roof from the eave to the ridge.
Now we've come to the final two tiers, tier six and tier seven, which are on the interior
of the building and to show that I'll rotate this bracket set so we can see what's going
on and so I can reach it more easily.
So this is tier six.
It sits on the tail.
All these cantilevers, tier one, two, three, four, five, its load is being carried way
out from the center of the building where the column is.
So this is tier six.
Again, these are continuous members going all the way around the building.
This is the finished end here and we'll have the interior purlins sit above that.
Okay, so this in a nutshell is a Sung Dynasty corner bracket set, one quarter of real size
from the Temple of Solitary Joy Mountain Gate Entrance Building.
So even though this is the complete bracket set with purlins, one final thing we can do
is add the hip on it and then it will be the total structural package.
So to do that, I'm going to rotate the bracket set again and I'll put the hip in place.
Again, strangely, the hip is just held by gravity and there you have it in all its beautiful
complexity and splendor.
You know, my final thoughts on this is that I've been so happy to discover a different
tradition and as I've gotten to learn a little bit about Chinese architecture, to admire
the creativity, the sophistication, the perseverance, the pursuit of beauty, ability to handle such
complexity, to create a unique style of architecture, so thank you for sharing my pleasure.
