3D flower coasters use alcohol ink and resin pigment paste to create a design that "blooms" into a flower as the resin cures. Popular with crafters and hobby artists, resin flower coasters are a fun and easy project with impressive results! 3D floral resin coasters are a great way for beginners to get started with epoxy resin and a chance for more advanced artists to expand their resin skills.
Artist Elena Gribanova from Allure Decoration has mastered the technique of 3D resin flowers and is here to explain how it's done. Follow Elena's step-by-step techniques to learn the basics and then change up the color palette and petal shape to create your very own custom look!
It's Rebecca from Art Risen. I'm here once again this time with Alana from Allure Decoration.
Welcome. Thank you. And Alana you have brought with you some amazing stuff today. I've never
quite seen anything like some of your work so that's exciting. And you are going to show us
how to do a flower inspired coaster and whatever tips and tricks that you have you'll let us know.
I will try. Exciting. Great. Let's get to it. So let's get started. Today we will start with our
flower coasters. What we need to do, we just need to measure and mix our art resin.
So let's take our resin. It's nice and warm so we can mix it together. It doesn't matter
which one we'll put first, resin or hardener. The most important thing it has to be equal
by the volume not by the weight. So we will just pour 200 of mils for resin and 200
of the hardener. Excellent. Let's start to mix it. At least three minutes.
Slowly but make sure it's mixed very very well. You do want to scrape the sides and the bottom
and just take your time. Sing a song or listen to your music. Even write a song.
I will use these molds today. We need a deep mold so the flowers will bloom. Okay it mixed
pretty well. Now we can just put it aside and let it sit for a while. The reason the resin needs to
sit a bit first of all the more bubbles will come up the less it will be in the mold and the second
of all the resin has this quality of move when it's in the mold so the more it sits the more it
becomes stable and we have a little bit more control of the desired picture we want to have
at the end. Now let's choose our colors. We will get the blue and the purple for today flowers.
So it was sitting for a while now about 15 minutes. Let's torch some bubbles from the top
I'm using my heat gun just a bit just a bit good and now we can start to mix our colors.
For our flower we will need to separate just a tiny bit I would say like around 30 40
milliliters of the resin for our light blue and about 20 for our white. Even 20 will be too much
I'm gonna do it like between 10 and 15 and the purple we will use as it is. So let's shake the
blue one so we just add a little bit of blue and stir it up and see if you're happy with the color
if it's too light or you want to make it more and now we need to mix the white and
we will mix it very well. For the white we just look for medium consistency and thickness we
want it to be thicker than the blue. So now we are ready to put the resin into the mold.
Check your resin feel it it's the temperature has to be warm but not hot or not cold that's how you
know the resin is ready to go into the mold. We will just pour a little bit more than a half of
the mold and try to get rid of the as much bubbles as we can. Let's take our gun and just go over
some more bubbles will come up and we will take care of them as well. Next we will add
some more resin to the mold. There's a little secret it's actually very important
the way you put the resin into the mold you put it into the middle or you put it on the edges
it will completely change the way the resin will stabilize. For this particular flower we will
put it in the middle. Lie over it okay and now we are ready for the fun part
decorating the flowers. Now it's a good time to create our centers. For that I chose the golden
broken glass this golden crux will go in the center. To dress up your center you can
use the broken glass you can use your glitters you can use the natural stones
whatever is will look more beautiful and more suitable for your creation. Now let's just
mix it together let's fly over it don't stay too long on one spot it will damage the resin
as well it will damage the mold. Now we can start to create some petals. Okay now we can take our
diluted blue resin and start to create some petals. You can do whatever you want with your design
this will not stay it will move in and you will not see what you create right now
after the resin is set. Let's fly with our heat gun over it we will take our inks alcohol
inks will help resin release more bubbles. Let the inks flow let's add some blue and maybe some
more purple in the center. Now let's sit for a while now at this point we will prepare our
white resin. For white resin I will use the piping bag you can find it in any stores for baking or
online and we will put our white mix into the piping bag. It's up to you how you want to
draw your petals. I found it very convenient to use the bags with it all down and you need to
fixate your end so it's not going out when you're pushing it. We will need to cut a tiny bit
of the end not too much and let's fly again with the heat gun and start to create our white petals.
So right now I can see we have lots of bubbles still into the mold and in order to deal with it
I would like to add some glitter so it will mimic the bubbles and doesn't look too bubbly
just sparkly. It's up to you some people don't like it some people love it. Now we are ready
and we will create some petals. I would love to start with the middle the shape of the petals
and design of the flowers it's completely up to you the best way is to do is just to look at the
nature find the picture or go out see how it grows and you will be creating the best flowers ever.
Okay you see how the white is sinking we don't want it to sink too fast we just want it to flow
slowly toward the center and create beautiful petals. Let's see where we need it more.
We will take the heat gun again fly over now we are done and let's just sit it for a couple of
more minutes before we shape it up and now let's go in and shape some flowers with the toothpick
and a small one. I'm purposely bringing the purple out but if you don't like it you can just
clean it. The resin start to move let's look good at this point you can add some more if you
see empty spaces. Okay let's use a heat gun again and now we are done. Now I would like to put some
cover on top of it and leave it until tomorrow. Here we are 24 hours later we are ready to unmold
let's take a look yeah it's look pretty good so far let's see what's on other side
let's see what we've got here oh that's lovely look at that this light blue goes into the
darker blue and then purple this is great flower let's see another one
this lovely as well a little bit darker but still pretty let's see that it's not
hard yet it will take another day to become completely cured so we are finished here
for now I'm very happy with the results and I hope you can create these beautiful flowers
on your own right now. Elena I love your work you are so talented thank you so much for being here
thank you for this I love that with resin there's always something new to learn for example
I didn't know how to do this so thanks again and please make sure that you subscribe leave
your comments so you never miss any of our resin artists and see you next time