Audi S3 8P - Painting / Stripping My Brake Calipers!

MotoAdventuresYT
21 followers
12 Video Views·Nov 23, 2021
Instagram - MotoAdventuresYT
Facebook - MotoAdventuresYT
Twitter - YT_Motor
YouTube - MotoAdventuresYT
Thank you for watching! make sure to subscribe for more videos on this!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
https://www.patreon.com/MotoAdventure...
https://www.instagram.com/motoadventu...
https://www.facebook.com/MotoAdventur...
https://twitter.com/yt_motor
What's going on guys and welcome to another video where today we're going to be doing the wheels
and calipers on my Audi S3. So this is what I have for the wheels and the calipers. This is just
some black primer, yellow paint for the calipers. I'm going to go yellow just like I did in my old
car. Four cans of gloss black and one can of lacquer. So yeah basically I don't really think
I'll be using all of these although I guess I could do just make it so they've got a huge coat
on. But hopefully we'll have enough of everything and I won't need any more than that for the
calipers but I guess we'll find out. I am going to take the calipers off and actually hang them
up and do them properly because I'm not really in a rush. I'm going to have the car on jack stands
on the driveway and then I can just crack on and if it takes a couple of days it takes a couple of
days. So yeah let's go ahead and get started. So I've got all the caps off and you can actually
pop these Audi rings out by just pushing these down and they'll all pop out and then I'm just
gonna probably wet sand all these make them all smooth enough as possible, primer them and then
I'm gonna sand the primer as well for that extra smooth finish and then we'll go ahead and get the
car on. I'm just waiting for this car to be moved and then we'll go ahead and get on. So there we
go got all my rings out the center caps and I've got all the center caps here ready to be wet
sanded and yeah let's get started again. Okay guys so I've gone ahead I finished sanding all the
wheels down. I'm gonna go ahead and start with the one I first did originally just because I know it's
gonna be completely dry from water. So yeah I'm just gonna go ahead and grab all these cards
get them around the bead and then go ahead and put our first layer of primer. So yeah
here we go. All right let's go ahead and get this ---- done then. All right guys so I've
literally just finished the whole can of primer and like already looks really good and this is
only primer like this is this stuff actually goes matte after it's dry but yeah this stuff
is looking good but um I've literally done all four wheels with this one can and it's basically
empty now but I've done all four wheels and the caps. I still need to do the nuts but
yeah so this is how it sort of looks when they're dry it's like a matty and then after that just uh
put the gloss black paint on lacquer it and it should look perfect. So uh yeah it's pitch black
now and it is only um what time is it? I don't even know to be honest it's probably like half
six, six o'clock but um yeah I'll go ahead and catch you guys in the next clip. Okay guys so
next day I've literally just finished putting another coat well the first coat I can't remember
if I did the first coat last night of paint and as you guys can see it's already looking decent
and I've gone and put paint on the caps as well which look pretty damn good and just some more
paint on the rusting uh head to them and uh yeah let these dry I might actually start taking off
the calipers I'm gonna go ahead and start with the front ones I think because I know the front ones
are gonna be a lot easier than the rear um should be some big ass bolts down there somewhere
but we will find out so uh yeah let's get started. Okay guys sorry I got completely distracted
since I last spoke to you guys I've put about three layers of lacquer on each wheel
as you guys can see they look very nice indeed in better on camera to be fair
and the caps as well everything's still drying so they're not going to be absolutely perfect
but uh yeah otherwise as you guys can see I've been very busy got all the brakes off
everything's all off and I'll go over to the car now I've got the discs off as well
I can't really see but I've got um basically all the brakes off and uh I've literally already
started with the brake cleaner and just cleaning down the uh calipers. Okay guys so this is where
we're at I've got the uh got the first caliper up in the air um this is basically my tester really
like as soon as this is done I can uh just want to make sure that everything comes out okay
so I've like just done a last coat of brake cleaner just to get any ---- off
and um I'm just gonna spray over the airline now but hopefully this should come off decent
I might actually cover that them up that thread up actually last thing to cover up and then uh
see how the paint goes on okay so this is where we're at I'm gonna finish painting today
um but both of the front calipers are painted well first coat or second coat whatever
um still got them to do still got the rear calipers to do and I've literally ran out of
like there's nothing in there left um so I'm gonna get some more but not too bad
but uh yeah we'll get there I'm gonna go ahead and leave them to dry like this now
come back tomorrow after five o'clock so they're gonna have a long long time to dry
okay guys so the next day after work I've come by and given her another coat they're actually
starting to look pretty filled in now and the same with this one it's starting to look
fairly decent and now I've put the wheels away after giving them another lacquer
and they're all in there they're just uh I'm gonna let them in there for 24 hours and bring
them out in the daylight and see how he did and I've also got the clips which have now
got some um got some lacquer on them which they seem to have turned out nice nice and shiny
very clear not full of ---- on they used to be okay guys so here we go calipers are now off the
hangers and this is the other one down here which to be fair look pretty damn good the only
flaw is that I didn't tape the inside of this um but I might actually put newspaper or something
on the caliper and spray this black uh just to tidy it up a bit more but as you can see the dip
piston is nice and was nice and covered and just this little bit where the hooks were
I just need to go over once more and that should be that for the calipers the back looks not too
bad either which you're never gonna see anyway but the front looks pretty damn good gotta clean
these up and these are what go like inside the caliper um so yeah these are next with the rear
brilliant take this line off um I'd like to take that off but that spring does not look fun
we'll have a look at that take the pads out separate the caliper to the carrier
yeah we're getting there guys we're definitely getting there I'm really pleased
with the outcome of these they're gonna look absolutely sick on the car I'm gonna paint
the insides of the discs black and otherwise just give them a lick of paint maybe on the edges
just uh get rid of that rusty surface but these discs are literally like they're like
no lip or anything back ones maybe tiny tiny bit but literally nothing
so these are good discs just been sat for a year okay so I've got the two number two brake I think
I don't even know what this is these are the carriers for the caliper I'm guessing not even
quite sure to be honest anyway I've got them up here taped off the pins and relatively clean you
know brake cleaner bit of sandpaper but end of day I'm never gonna get all this off because
this is years and years of brake dust so um yeah I'm gonna go ahead and get these sprayed
okay so here we are um I've obviously sprayed these got a good coat on them and I'm gonna
go ahead and let them dry now I've also got one of the back carriers um first layer as well
so yeah we are slowly getting there the calipers are now looking insane and I'm actually gonna
try and lacquer these after they're done give it a go anyway um hopefully we don't have any issues
but yeah I'll go ahead come back tomorrow and hopefully everything will be dry okay guys so
both calipers are now dry I'm gonna go ahead and start off with the lacquer and I've also
got a couple more coats on the carriers okay so just finish off with the lacquer you guys can see
nice and shiny so yeah okay so back to where we left off the calipers are now dry
I've got them covered up because I just want to paint that little bit that's
over sprayed if I can just get a bit of black on that a little bit of black there I'll be a happy
boy the lacquer did not go to plan it actually started reacting a little bit as you guys can see
here not great at all but I don't really want to start stripping all the paint off and starting
again so what I've done is I've just managed to scrape off all the bad bits all these bits back
here you're not going to like too deep into the wheel to actually for me to actually care that
much but as you see here it was bad here and here I've just scraped all off I've done some more
paint um the other one didn't wasn't as bad as this one but I'm hoping that it will still come
out quite nice okay guys so since I last seen you guys got a few more coats and everything
just getting everything properly painted up um and I've also started sanding down and painting
the discs so just trying to get all the rusty areas covered I've just sanded this one down
as you guys can see and then I've just got these two left to do
which you can see all rusty and not as pretty as they could be okay guys so these turned out
really nice they'll look they'll look stunning on the car instead of that rusty ---- that was
like there that's a world better and it's just need some more coats on the rear caliper
I think this is the rear carrier and the front caliper which
had the reaction doesn't look too too bad at all to be fair um this is the other rear carrier
which I believe is done pretty good okay so there we go this is everything that's all been
dry I've taken all the tape off and everything and to be fair not bad at all I reckon when
they're all together they'll look pretty good on the car there you go yeah not bad
a few more coats on these and then one more rear caliper to do and then we'll start reassembling
okay guys so there we go nice and assembled now with the estuary logo
um I've just had to do a little bit of a touch up here and there just to um get the color
exactly I'd like to um get rid of this but I can't do that while the caliper is still wet
but other than that see this is where I'd like to like still get some black paint on that
just to get rid of that yellow but uh so this is what we got here just been doing a couple more
coats um trying to get this caliper properly coated but otherwise I'm gonna do a couple more
coats here I'm gonna clean the last caliper that needs to be done and get a coat or two on that
and then it's home run really okay guys so this is the other caliper I need to do
actually painted it really well with a heat gun and got all done this is the one I had
hanging up originally I think I'm going to redo it all because this is just
it just needs a bit more sanding and prep work for it to actually come out okay and this is just
that hanger which is done basically I'm just gonna let it dry overnight I sprayed the last
disc so that's gonna sound as well as all the rest of them all done okay so this video is literally
ongoing for about a week now just every single day another video another video a little progress
this is the caliper which I've sanded down again and redone unfortunately I don't think I'm gonna
get this thing perfect because the why it's just like got old like corrosion I think it is
underneath the original original paint so the whole thing realistically should be stripped down
but I don't have a sandblaster or anything like that to actually get that properly done so I've
just sanded down the parts which are bad and completely blasted the whole thing with paint
but I'm gonna go ahead and start reassembling the rear brake now obviously the front ones are done
so I'm going to assemble this one both of these are completely dry and just that one more to go
and then we are ready to move on to the car okay so I've just tidied up a little bit that's that
one completely done all reassembled nice assembly no smudges no scratches straight in all copper
grease as well so that's all good and then we're just waiting for this one to dry which I'll leave
it overnight and then once this is dry we'll assemble this one get the discs on and then
put the calipers on and I can't wait the wheels are still inside the other room
get them out and yeah we are definitely getting there
okay guys sorry for any wind noise but it's the next day as you guys can see the wheels are back
on calipers are on and they look absolutely perfect even the center of the disc we have sprayed
looks great so yeah really really happy with it it's turned out pretty much better than I
was expecting anyway and same this side absolutely swat on the wheels came out well as good good as
well so uh yeah and as you guys can see I've got the gti here because I've got a few bits to do to
this we're just going to be in another video but um yeah so um I hope you guys enjoyed this video
it may be a bit of a uh all over the place one because I've recorded on multiple days
but uh yeah I hope you guys enjoyed this video and I'll go ahead and see you in the next one
