Re-Spraying My Diffuser! & New Mod! - Audi A3 8P

MotoAdventuresYT
21 followers
9 Video Views·Feb 22, 2019
Thank you for watching! make sure to subscribe for more videos on this Audi A3 8P!
Comment down below and let me know what you think about this video as well as what you want to see in the future!
Link To Coolant Cap-
https://www.ebay.co.uk/itm/New-Genuine-Porsche-991-Coolant-Cap-VW-Audi-Seat-Skoda-VAG-1-8-2-0-Volkswagen/192239726327?ssPageName=STRK%3AMEBIDX%3AIT&_trksid=p2057872.m2749.l2649
https://www.instagram.com/motoadventuresyt/
https://www.facebook.com/MotoAdventuresYT/
https://twitter.com/yt_motor
https://www.youtube.com/channel/UC37q8BO_nT18vvoPK88vxjw
What's going on lads, today I've got a little video for you where basically I'm going to be
spraying my rear diffuser on my Audi. I've got to spray the rear diffuser because basically I've
already sprayed it in the past but as you can see here and if you can see that it's basically come
off just from like stone chips and stuff so I'm going to show you guys how to get this off
and I'm going to go ahead and spray it gloss black and as well if I just open the bonnet
open her up okay as well as I've also got a new coolant cap to fit this is obviously missing I've
ordered a new one hopefully that will come down soon I've also ordered a few other bits which
I'll be doing a couple videos on so yeah so I hope you guys enjoy this video it's going to be
me repainting the rear diffuser I'm going to go ahead and clean the whole car just so that when
I do spray this there's no muck on it or anything I'm going to go ahead and get started so first
things first pretty easy I bought this it's basically a Porsche 911 coolant cap which is
basically the same design as these coolant tanks so hopefully this is just a straight fit now I
it's a bit special and it's a bit cringy but I don't know I think I like it I think I'm gonna
look like oh it wasn't even tight okay so yeah I think I'm gonna like the look of this so I'll
take this one out so I think it looks the same and they look the same so hopefully this is just
straight oh look at that put this on all the way down and then a bit more oh yeah that looks pretty
all right look at that yeah that's pretty sick cool I know that you can get the oil caps as well
you know in the sort of chrome fashion but I don't really know if I want to go down that route
but that is definitely looks all right to me so yeah that's a nice little modification I'll put
a link in the description for where I got this from and obviously it's just straight swap so
yeah so I like that okay so I'm gonna go ahead and get the car all clean and ready to take that
rear diffuser off okay lads so basically I've cleaned the car now it looks a lot better but
the main reason I did clean this is just to make sure that the bottom diffuser is clean when I take
it off so I'm gonna go ahead and take this off now I can't I had taken this off before obviously
when I'd done the first spray job but I can't actually remember how I got it off I'm just gonna
have a quick look see how I got it off I think it was some torx screws underneath and probably some
clips so yeah I'll get back to you guys and let you know how to get this off okay so I've got the
diffuser off I've got it right here on a little step ladder and from here you can already see
the amount of like scratches and everything this is a now this could have been just me taking it
off but I know that that sort of stuff definitely wasn't me then but yeah basically these two holes
here there's one here and one there these are not the screw holes now I did undo the screws that
were in these holes but they're nothing to do with the diffuser therefore the bumper if you
want to take the bumper off basically it's two screws which is one here and one here and that's
what they look like they're just black screws and they're not even torx they're just your normal
phillips ones so yeah this is what it looks like without a diffuser so yeah it looks pretty weird
I've just already I've cleaned all up under here because this is all black as you can imagine
but yeah to get it off you just undo the two screws there's one there and one at the end there
and basically the rest is just clips now there is quite a struggle getting it off but you just
got to be brave and try to edge it off without snapping anything but yeah I'm gonna go ahead
clean this all up because obviously it's got muck all over it and then maybe do some wet sanding on
bits like this and hopefully start spraying I've also got this bit here which is right here
which doesn't look too bad to be honest but yeah I'm gonna clean all that up as well
and hopefully this should all turn out quite well so yeah I'll get back to you guys when I'm
cleaned this up okay lads so I basically just start uh just finished wet sanding this little
bit I guess this is where obviously you take out if you need to tow the car from behind
but yeah it looks really nice and smooth now so hopefully this will come out really nice I've
just got to wet sand the rest of this now I've just left it here to dry because it still had
some soapy water in the honeycomb bit so yeah I'm gonna go ahead start wet sanding this and
I'll get back to you okay lads so I basically start finished um wet sanding this which it
looks pretty darn good nice and smooth so I'm gonna go ahead and shake the bottle up hopefully
get this hopefully get this all sprayed up so yeah let's get started I've also got the um
this little bit as well which is looking really nice it's really smooth so that should come out
well how stupid is this so basically just try to start spraying and ready reading on the freaking
thing it's got a seal on inside which you have to get a screwdriver freaking truck screwdriver
to get this out okay so I've just got it off now so yeah if I didn't have a screwdriver I wouldn't
well I guess I'd have to use a freaking dorky or something that's good okay so I'm gonna start
from the left to the right and we'll see how this goes I'm just gonna let that dry a little bit
but that'll be sort of the first coat now I didn't go on it too thick because I definitely
didn't want it to run if you see there it's got a bit a bit patchy so I just don't want it to
take it slowly get it right I don't want to rush it and then get it wrong so yeah so I've done a
couple more coats it looks a lot better I'll just wait for this coat to dry I'll go over it a couple
more times anything is that little ripple there which I'm gonna try and go over a couple more
layers and hopefully that should be gone but we'll see how we go so this is basically the
underneath of the car here this side and obviously that's where the exhaust goes there's
a couple of little scratches there which I'm just going to try and put some more layers on
so yeah okay so I've finished spraying the rear diffuser I'm just gonna let it sit here now in
the sun and hopefully this will dry within the next half an hour or 20 minutes I leave it here
I think it came out all right it looks sorry it looks quite decent obviously the diffuser itself
is not in the best condition now it does have some scratches and stuff but with the wet sanding
definitely did help a bit with definitely like this area at the top it's a lot smoother
so yeah I'm pretty pleased with it I've probably done about five coats on it
um but you can see here if you can see I could yeah it's got some little scratches which I've
had to spray over but yeah that'll be good for now obviously it was black before so that helped
quite a lot it was just sort of a touch-up spray really so yeah another two coats on the little
plug cap thing um which goes on the diffuser and then I'll put that in the sun and hopefully
that'll dry and then I'll get it back on the car okay so it's all dry and it looks 10 times better
and I really do like the outcome of this I'm gonna go ahead and get it back on the car
and then I'll go ahead and get back to you okay so for some reason the audio was actually corrupt
in this footage um but basically I've got the diffuser back on it's just two bolts
and all the clips on top a couple of clips on the bottom you just gotta double check that all
the clips are properly in there because mine some of them didn't go in I had to double check and
push them in but um yeah I think it looks a lot better now um so yeah I hope you guys enjoyed the
make sure to like comment subscribe if you want some more and definitely comment down below to
tell me what you guys want to see next in the next video so yeah I'll see you guys in the next one
