Getting Stuck Buckets Unstuck - Volume 2

DirtFarmerJay
310 followers
7 Video Views·Feb 15, 2019
Plastic buckets are REALLY handy around the home and garden, with literally hundreds of uses. Even so, they can be really frustrating when they all get jammed together and you can't get them apart. Are you tired of that stack of buckets taunting you, mocking you that you've not prevailed against them yet?
Take charge, and get those buckets back to into use! Here's another series of tips on how to get seemingly permanently stuck buckets apart using common and readily available items.
If you missed the first edition on how to use an air nozzle and compressor to do the job, you can check it out here: https://youtu.be/Xyp4pRckXMM
Hey, Dirt Farmer Jay here from DirtFarmerJay.com.
In an earlier episode,
I showed you how to get stuck buckets unstuck.
Well, some of our viewers wrote in
and gave me some more tips and techniques
on how to do that.
Let me show you a few of their ideas.
You know, you see these buckets all over the place,
whether they're the orange ones, the blue ones,
white ones, or whatever,
it seems like every major retailer
has their own version of it.
They're extremely handy around the home
for all sorts of uses.
Their big downside,
when you stack them all together,
many times they get permanently welded together,
or so it seems.
In one of our earlier episodes,
I showed you how to use an air compressor nozzle
to get them apart.
But fairly, some of our viewers wrote in and said,
hey, Jay, what about for us
that don't have an air compressor?
Are there any techniques for us?
And some others gave me some ideas.
Let me show you some of the best ideas that came in.
Before I show you the first method, though,
a couple of caveats.
First of all, this method is for buckets
that have not been glued together.
There's no adhesive in them,
including some paints that really may stick them together
and make it so you can never get them apart.
The second item is if they are actually
mechanically fastened together,
or they are totally two different sizes
and you've got a larger bucket
absolutely wedged into a smaller bucket below it.
The third thing you need to just be aware of
is sometimes the bales, the handles themselves can,
they always seem to fall directly
on the ribs of the bucket below it.
And you can be exerting all sorts of lifting pressure
and they're just catching.
So make sure that you have separated the bales.
Now, let's go to tip number one.
If you don't have an air compressor,
you can go down to your local big box store
or electronic supplier and buy a can of compressed air,
commonly used for cleaning electronics,
such as keyboards and such.
You can simply take the straw,
find the gap between the top bucket and the bottom bucket
and look for some place where there's a little distortion.
There's a good place right there.
Jam that straw in there and start getting air going.
Once that happens and you get air down in,
there it is, it's gonna break the vacuum
and look what happens.
Now you can separate the buckets.
That's technique number one.
Technique number two,
since what's really holding these buckets together
is vacuum, when they were originally pressed together,
the air was pressed out.
And when you try to pull them apart, a vacuum is formed.
What you've got to do is create positive air pressure below.
If you don't have compressed air,
another thing you can do is warm the air in the bottom bucket
so that it expands and exerts just even mild pressure.
There's a couple of ways you can do that.
One is to submerge it in hot water.
Another one is to put it out in the sun
with the top half in the shade.
The third one's just a good old blow dryer.
Let's give it a shot.
Make sure to move it around
so that you don't burn the plastic in any one given place.
Keep moving around.
Warm the bottom as well.
And there you go.
It takes a little longer, but it works.
Okay, method number three.
This viewer had the idea of never allowing the buckets
to get a vacuum form to begin with.
And he does that by taking a regular wooden clothespin,
taking the spring part out of it
so that you now have the two wood parts.
And when the bucket is new and in good condition,
a good place to place these is right here
under where the bail is connected.
That's because the bucket usually gets hit
out in this area when it's handled, not near the handle.
And what he does is either glue them in with silicone
or you can affix them from the backside
with a small fastener.
And by having these pressed in on both sides of the handle,
and I'm just temporary placing them,
when the adjacent bucket comes in,
it only goes up so far
and creates a little air channel there
so a vacuum can never be formed.
Pretty clever, huh?
Well, those are three great tips
that should help you recover those buckets
that you thought were ready to go off to bucket heaven.
Hey, if you found these tips to be helpful,
why don't you like the video?
Better yet, subscribe to our channel.
Until the next time,
this is Dirt Farmer Jay from DirtFarmerJay.com.
