5-gallon buckets are really handy and stack well into a small space. But when they get stuck together, it’s a pain. Here are the latest tips on how to get them unstuck!
#bucket #stuckbucket #homerbucket #shoptips
Plastic buckets, especially the 5-gallon variety, have become commonplace and are offered by most hardware, farm, and ranch, and paint supply stores. They are great advertising for them, and quite handy for you!
The buckets are made from plastic using injection molding techniques. This makes the wall thicknesses and the shape of the container consistent. Because they are tapered the same way from bucket to bucket and have the same thickness wall from top to bottom, the buckets nest perfectly inside each other (when they are from the same manufacturer). They do this without getting wedged together, even if it feels like it!
What makes the buckets resist coming apart is the vacuum that forms between the buckets as air is pushed out as the buckets are pushed together. Because the taper and thickness of the sides are so consistent, there is very little space around the buckets to let air into the cavity of the bottom bucket, so the vacuum can be hard to overcome.
Assuming that the buckets are from the same manufacturer and they are not fastened or glued together, getting the buckets apart is a matter of overcoming the vacuum between buckets.
Your fellow viewers have given us many ideas on how to do this. Here’s the latest ideas to come in:
Brute Strength. If there are two people with a fair amount of strength, then have one person grasp the ridges around the rim of the top bucket, and the other person grasp the ridges of the second bucket and pull away from each other. Consistent tension is better than sudden jerks. As the vacuum is overcome, the buckets will slide apart.
Use Pieces of Scrap Garden Hose to Stop a Vacuum from Forming in the First Place. Use short sections of old garden hose and attach it on opposite sides of the bucket so that the hose can be folded into the bucket as another bucket is slid into it. This stops the bucket from sliding completely down, as well as creating a slight gap along each side so that air can move easily in and out of the cavity under each bucket on top. No vacuum is formed, so the buckets will nest and un-nest easily.
Use an Object at the Bottom of Each Bucket to Stop a Vacuum from Forming. Before nesting each bucket, you can place an object ranging from a brick, or wood block to a stone to stop each bucket from sliding down far enough that a seal is formed along the sides of each bucket.
Use a Product Designed to Stop the Buckets from Getting Stuck Together. We’ve come across “Stuck It Bucket®” - a clever, durable, and economical device for keeping buckets from sticking together. You only need one per bucket. They are available at www.stuckitbucket.com. At the time of the filming of this episode, a 2-pack is $6.99, a 20-pack is $54.99, and a 40-pack is $99.99. They work by hooking onto the edge of the top bucket and having a “shelf” at the bottom that prevents the bucket from settling down too far into the bucket below it. It’s simple and effective, and it supports a U.S.A.-based micro-business!
With all the uses that these buckets are used for, we’re confident that we’ll hear some more great ideas on how to keep buckets ready to use without the hassle of them being stuck together.
To see other effective and economical methods for “unsticking” buckets, check out our other episodes:
https://youtu.be/Xyp4pRckXMM (Getting Stuck Buckets Unstuck, Volume 1)
or ,
https://youtu.be/Api5pMnL9ik (Getting Stuck Buckets Unstuck, Volume 2)
Just Do It Yourself!
[Music]
hey dirtfarmer J here from dirtfarmer
j.com with the latest round of insights
of how to get stuck buckets unstuck well
your fellow viewers keep sending in the
tips we've got three great ones stick
[Music]
around hey dir farmer J from dir farmer
j.com these kind of buckets uh are just
unbelievably handy around the home the
shop uh in the garage uh camp all that
and they're just a wonderful utilitarian
invention uh and they're very common
place however many times and they're
stacked nested the way they are right
here they tend to get stuck especially
if there is any kind of substance in
them or a lot of weight a big old stack
of them and then comes time to try to
get them unstuck well here's why it is
happening assuming that they're all the
same manufacturer bucket and you haven't
put a larger bucket in inside a smaller
but the main reason it's happening is
because if you look at each of these
buckets and right now we have a little
vacuum forming right there there it is
there's a nice taper on the side of
these and with modern manufacturing
techniques of injection molding the wall
thickness of the buckets are consistent
from bucket to bucket meaning it doesn't
get thinner as it get to the top or
thicker as it gets to the bottom and it
allows it to Nest beautifully inside of
each other however that's all a lot of
surface area as it gets put all the way
down in there that can actually create a
seal so as we lower it in there I can
feel the air come out around it and
you'll see when I lift it it kind of
tends to lift the other one there's
actually a vacuum that there goes that
forms right there well when that vacuum
is really strong that is what is
actually sticking the buckets together
and it's very difficult to break the
vacuum well here are three different
techniques that'll help you to over
overcome them from your fellow viewers
number one brute strength so what you
can do is get two different people here
one is to grasp the top of the bucket
also make sure that these Bales aren't
caught in The Ridges so if these are all
like that you can see that always tends
to fall in the bucket below and kind of
locks them together make sure that is
open like that so you can pull it apart
well if that's wedged together you get
one strong person up here that holds on
to this bucket starts pulling towards
you and you get another strong person
with the bottom bucket pulling the other
and kind of rotating back and forth to
get air to start going down that Gap to
break the vacuum so you're simply
overcoming the vacuum with pure strength
if you don't have somebody else to help
you or you don't think you want to exert
the strength to do that here's technique
number two when you're stacking the
buckets put an object that's in the
bottom of the bucket that's tall enough
that does not allow the bucket to settle
all the way in the this can be a block
of wood a brick a rock whatever it is
you want to put in there so once we put
that object in there and then take the
second bucket and put it on top of it
it's not going to allow it to settle all
the way down therefore you never have a
vacuum form and that comes in and out of
there really easily the tradeoff on this
it adds weight secondly if you've got a
really tall stack it continues to put
weight on the bottom of each of these
it's possible to start cracking buckets
down below but if you got relatively
short stacks of buckets this is a
perfect acceptable way to get them
really handy and ready to dispense
technique number three is actually
off-the-shelf product you can purchase
it's been newly developed by a USA based
micro business and what the product is
is called stuck it bucket these are
little hooks right here you only need
one per bucket and what you're doing is
actually hanging over the edge of the
bucket and elevating the bucket that's
going to be stacked in let's go ahead
and put it to use so you just simply
take one hang it over anywhere you want
on the bucket here bring in your next
bucket as you can see there's a gap that
forms right here therefore no no vacuum
at all you can do that just go to the
next one stack that up like that and you
can just go up as high as you think
sound judgment warrants and you've got a
solution that just keeps those buckets
ready to dispense if you're interested
in getting these you can get them online
just go to stuck itbu
it.com and no we don't get a commission
just when we find little com uh
Solutions like this that we find to be
helpful uh this might be something
you're interested if this is an ongoing
struggle for you and you want to keep
these buckets ready to go well we can
check out all the other episodes this is
one and three uh episodes so far people
keep giving us great ideas but you can
check out the two episodes at the links
above or in the description below where
there's lots of other great tips of how
to overcome uh the vacuum below there
and keep those buckets ready to go
another great skill to have is to be
able to correctly roll up extension
cords check out this episode where we
show you how to do the figure8 method
it's clean efficient and you'll never
mess with messed up extension cords
again and check out this other video
also that YouTube thinks is perfect for
your interest and we'd enjoy it if you'd
watch it too till the next time this is
dir farmer J with no more stuck
buckets