First off, no it's not THE 4 cable method! I know that. I 4 cables. I go over three different scenarios for using your guitar processors with your amplifier. The four cable method utilizes guitar processors which have an fx loop built into the processors to allow for splitting the effects to before and after preamp sections of an amp. I do not cover that method in this video.
Guitar Tech episode covering a helpful tech tip!
Rewiring a 4 ohm stereo guitar speaker cabinet to 16 ohm series.
How to swap out the tubes on your guitar amp.
Quick procedure I use to clean out the audio jacks on my gear.
How I used the EXPON Menu to setup a cross fade between guitar and piano tones using the expression pedal.
A video on how I changed the function of the CTL foot switch and the Expression Pedal to suit my needs on a new patch utilizing Acoustic Guitar, Piano and Church Organ tones.
Quick video about the connection options on the Roland GR-55 Guitar Synth.
A how-to video on setting up the Roland GK-3 with a Roland-GR-55.
Cleaning up connections on my JC-120 amp in an attempt to clear up the hissing.
GTDaudio TN-150 Power Amp Unboxing with detail.
Watch as I go through the cleaning of this 1996 Carvin RSP Ver.001.
Just received my used vintage gear and don't you want to know what it is?
Unboxing of my latest purchase, a used Carvin Quad X Guitar Preamp.
Taking a look inside of a Carvin Quad X-Amp guitar preamp.
I go over the 9 tube assignments in the Carvin Quad X guitar preamp and discuss what I am personally using for tubes.
How to upgrade you Digitech 2101 guitar processor.
Detailed information about the front panel of the Carvin Quad X guitar preamp.
Detailed information about the rear panel of the Carvin Quad X guitar preamp.
Follow my guitar rack build which is not as slow as it first appears to be. I assemble a new Raxess 6 space rack and load it with my rack guitar system.




















