Roland GR-55 CTL & Expression Pedal Setup

TheGospelGuitarist
1 follower
2 Video Views·Mar 31, 2026
A video on how I changed the function of the CTL foot switch and the Expression Pedal to suit my needs on a new patch utilizing Acoustic Guitar, Piano and Church Organ tones.
AI Generated·May contain errors
Hi, I'm Mike Sullivan. Welcome to Guitar Tech, how to do it yourself.
Hi, welcome to the Gospel Guitars channel. In this video, I'm going to go over how to set up
your control switch on the GR-55 guitar synthesizer. I find that so far, I'm using
the machine the little bit that I have. It's easier to get to know your way around the machine
if you actually have a real purpose for digging around, instead of just trying to figure stuff
out. That's when I find that you really learn how to do things. On the screen here, you see
that it says Acoustic Guitar, Piano, and Church Organ. This past was Acoustic Guitar with Church
Organ. I changed the name of it to include all three instruments because they were already there.
If we go into the edit mode, now this is basically the default setup that was with this
patch that came on it. We have the Church Organ and then it had a Piano and a Steel String Guitar.
If you notice, I turned on the Piano and that's why I changed the name because I wanted the Piano
voicing to be sounding and to have control over that. I left the Church Organ on,
so there's basically, I got three sound modules here that I'm using.
What I wanted to do was have control over all three instruments. Basically,
either turning them on or off, but I only have one switch and one expression pedal, so I had to
figure out a way to get what I wanted. Having that in mind, I needed to learn how to use the control
switch. How do I set that up to turn certain things on and off? If you use the page button
from this point and I page over past the effects over to master, now master's already got your
pedal and your GK control. If you hit the enter button, it takes you to this screen.
Back off into that screen. This is your control function screen,
which is the control switch on the pedal board. There are four positions that you can set for
when the position is in off. In other words, the red light is turned off. You're not using the
switch. You can actually set it to where certain voices or tones are actually turned on when it's
off. On mine, I have it set up right now so that the tone one, which was the church organ,
I have it turned off because I don't always want the church organ. I have the piano on tone two
turned on and the guitar six string model acoustic is turned on. That's how I basically have it set
up. When I go into that patch, I have a piano and guitar blended together mixed. That sounds
decent to my ear. When I turn it off, if you scroll down, you have four more settings on the
bottom, which take effect when you actually turn the switch on and the red light is illuminated.
At that point, basically all I'm doing is turning my church organ on.
Out of the three, when the switch is off, I do not have the church organ. When it's on,
I do have the church organ. The next thing was to do was to figure out how to control these things
as far as volume balancing. I had to figure out how to use the expression pedal along with the
setting. What I wound up doing is, if we can exit out of this, we can page over to
up here, see where it says CTL. That's control. Now we're going to go to expression pedal.
This one should be set to tone volume. Tone, again, is referring to the tones that you have
set up, the instruments that you have set up to sound. When the pedal is being used,
it is controlling the two PCM tones, which is the church organ and the piano, but it is not
affecting my guitar volume. It's only controlling the volume of the keyboard or the piano and the
church organ. That way, when I'm playing through the patch, I can actually go from all three
instruments because the guitar is going to sound anyway through the GK3. When I take the pressure
off of the pedal, rolling the pedal backwards will basically turn off the keyboard or piano
and the church organ. I will only have the acoustic guitar sound. Also, if I have the control
button pushed, then as we see back here in the control functions, when I have that turned off,
if you page back up here where it can be seen, I have it set to where the church organ is turned
off, but the piano is still on. This way, I have three different instruments in three different
combinations that I can use. I can have just the guitar sounding or I can have the guitar
sounding with the piano because if I have only the piano turned on, the expression pedal controls
the volume of the piano. I can actually roll that back to where it's only the guitar or I can
start turning it up with my foot and bring in the piano. If I really want to go crazy, I can
include the church organ as well as the piano. Both of those can be controlled at the same time
with the expression pedal. That's how I set that patch up, but in order to learn how to
do these things, I had to want to do something that the machine was not doing.
That's the best approach, I think, when it comes to using this machine because there's so much
in here. You just cannot tackle this thing all at one time, but as you develop what you want to do
with certain patches, find patches that are close to what you're looking for. The acoustic
guitar with the church organ was close to what I was wanting, but when I seen the piano tone was
on tone 2 but was not turned on, when I found it in there, I was like, yeah, I want the piano too.
I want to be able to turn that on and off and I want to be able to control the volume because
the volume was only controlling, I think it was controlling everything, the guitar and the piano
would go up and down. I'm like, well, I don't want that. I want the guitar to keep sounding,
but I want control of the volume so it's kind of like you're doing a mix live between the piano
and the guitar. You don't want the piano unbearably loud and church organ can get really loud and so
it can be overbearing and drown everything else out. So that's how you go about setting up your
control button and or switch and your expression pedal is on these first two boards right here
and you get through those with your page left and right on your floorboard.
And so that's a real quick sample of what you can do. As you can see, there's basically
there's eight settings for your control for which instruments you want to turn on and which ones you
want to turn off of four different sources. So you can get pretty slick with your combinations here.
You could switch between, for example, a guitar and a piano. I'm doing that all in one patch,
but the guitar is always there. I could actually go in here and turn off the modeling tone right
here and turn that off. So when I hit the switch, I only get the piano. So now I can switch between
two instruments, playing piano, playing piano with a church organ, or just playing the piano alone
and never playing the guitar at all. So I find the control switch that's going to be very versatile
since it does have all of these different approaches to using it. And on doesn't always
mean on and off doesn't always mean off. It's just two states of the control switch
and you can utilize that to your advantage. So I hope that helps you out if you're just starting
out with this thing. Those two biggies for me was the expression pedal and the control
button to try to get into those as quick as possible and learn what I can set up with those.
And as you can see, there's a whole lot of more areas up here to explore and more videos coming.
So don't forget to subscribe and share and like the videos. Thanks for watching. Have a good one now.
Well, thanks for watching and see you next time on Guitar Tech. How to do it yourself.
