Options for Connecting Guitar Processors.

TheGospelGuitarist
1 follower
1 Video View·Mar 31, 2026
First off, no it's not THE 4 cable method! I know that. I 4 cables. I go over three different scenarios for using your guitar processors with your amplifier. The four cable method utilizes guitar processors which have an fx loop built into the processors to allow for splitting the effects to before and after preamp sections of an amp. I do not cover that method in this video.
Hi, I'm Mike Sullivan. Welcome to Guitar Tech. How to do it yourself.
Hi, Gospel Guitarist here. I had an inquiry a little couple days ago about a gentleman that
wanted to bypass his Vox Amplifiers effects and it kind of inspired this video. I know when I got
into the guitar processor scene about 15 years ago, it was all new to me because when I used to
play as a kid, all we had was stomp boxes and wah-wah pedals. So all the ins and outs and
everything can be mind-boggling sometimes. But what I want to do here is show three different
ways that you can use, in this example, a floor processor. Only two of them are really valid.
The third one will work, which I'll talk about, but it's not something you'd want to take on stage.
What I have here is a Roland JC-120 amplifier. It is a true stereo amplifier, meaning it has
completely separate 60-watt amplifiers and speakers. So it is an absolutely separate
left and right. It's not faking anything. Most of your processors also can come out in stereo
as well as mono. So how would we use these? Well, the Boss ME-50 I have here isn't technically a
guitar processor per se, but more of a multi-effects unit. That's why they call it a guitar multi-effects
unit, which I'll get into later. I'll talk about the difference there.
Basically, this is designed to be used in front of your guitar amp. So what you would need to do
for that is simply run your guitar cable from your guitar to the input of the floor unit that
you're using, which technically would obviously not be on top of your amp. This is strictly for
illustration purposes, so you got to pretend this is out in front on the floor somewhere
at the front of the stage. So your guitar would come into the effects unit's input.
And then typically you would run out the mono side and then run the other end of the cable
to the guitar's input on the front of the guitar amp. So that's how you would typically use it,
just like a big stompbox. It's just a big huge stompbox is all this is.
So that's one way you can run the effects unit. The other way that you can run the effects unit,
especially with this amplifier, is a four cable method. And some people go, well,
it's a four cable method. That was my question, too. I had no idea what a four is like. Boy,
isn't that kind of redundant? Just put it out in front, you know. Keep it simple. Two cables
will do it, right? But you get more options if you do things a different way. Distortions
sound really good in front of an amplifier, but your choruses and delays sound a lot better
when they run through the effects loop of your amp. So when you use a multi-effects unit like
this, you're just kind of stuck with everything being in front of the amp. It doesn't sound
horrible, but it does sound better when you use it in the effects loop. And it doesn't change
the distortion all that much, but it does affect the other effects. So with the four cable method,
you're going to want to plug your guitar cable coming from your guitar and straight into the
amplifier's input on channel one of your amp, let's say. And so in the back of the amp, what
you would do is you're going to run a cable from your amplifier's effects loop, send. And that
send signal is going to go through your cable to the input of your effect unit. Now, because
I have a stereo rig here, you can also do this with two amplifiers if you want. You would connect
your left and right, or you can just go mono, okay? But you can go left and right out to your effects
return on your amplifier. So now what's happening is your guitar is actually using the front of
the amplifier's preamp, okay? So it's still being used. And then once it passes all your tone
controls and volume controls on your amplifier, it goes into the effects section, comes out of the
send of the effects section, and into the effects unit, okay? This could be a rack unit, you know.
Maybe you just have something like an Alesis, you know, midi verb in a rack.
So this could be literally anything. It doesn't have to be a floor pedal.
So you go into the effects unit and you shut off and control the effects with your midi controllers,
or however you're going to control your unit, which comes out in stereo, returning to the amplifier.
And then it sends it to the power amp section from there. And your amp, you have everything
about your amp. Everything's still intact, okay? So this is a four cable method. As you can see,
you got one going from the guitar to the amplifier. You have number two going from the effects send
to the unit's input. And then cables three and four coming out of the unit into your stereo,
or into two amplifiers in mono, however you want to work that. So this is solution number two that
you can use. And I like this one. It offers different approaches on my amp, and it's not
available on a lot of amplifiers, but on a Roland unit, my JC120 has a series parallel switch. So it
decides how I can run this unit. So it's either going to be in line with the amplifier, or it's
actually going to run parallel to it. And if I run it in parallel, it's really cool because I can
set my distortion unit on, and then use the volume pedal to take this unit in and out of the signal
path. So you can actually do a morphing from a clean tone to a distortion delay tone just by
moving the pedal. And it just sounds really cool to do stuff like that. But you have to have it
wired in parallel in order to do that. So it's a nice option that this amplifier has. It also has a
level where I can set the level of the unit coming in. And hopefully your amp will have that. If not,
they're usually self-adjusting in some way. Okay, scenario number three. Number three is when you
take your guitar cable from your guitar, and you run it into your input of the unit. And the unit
is now feeding into the effects return of the amplifier. Now what you're doing when you do this,
is you've completely bypassed the preamp section of your amplifier, and you're only tapping into
the power amp within the amplifier. So none of your controls on the front of the amp are going
to work. None of the level controls, tone controls, none of that is going to do anything at all.
By doing this, I would be tapping straight into the power amp. So basically, I'm using the whole
amplifier as only an amplifier and speaker. And I'm not using the preamp. This is now my preamp.
I've completely replaced the amplifier's preamp with something else. I have a Digitech 2101 and
a Boss GX700 guitar processors. One's a modeler, and the Digitech is all tube. And I really like
tube distortion. So when I run that unit in this kind of a connection, I get really nice tube tones
through a solid state amplifier. And it gives me a nice flexibility. So
that's option number three. Guitar into the unit or your rack unit's input.
Come out your floor unit or your rack unit's stereo outs into the effects return on your
amplifier. The effects returns on any amplifier is going to directly feed into the power amp
section of the amp because it always feeds after the preamp. So that's option number three. So this
is just a quick video on how you can set up these different scenarios. I would suggest that you play
with them on your own and see which things you might discover that you really like about them.
I would suggest a really long cable to run to a unit on the floor because you're going to want
this out in front. So you're going to want, you know, 25 foot cables or so if you are performing
out on stage somewhere. So make sure that these cables and your guitar cables are all long enough
for the runs. So that's it on this video on three different ways you can run your effects unit
in front of the amp, in the effects loop, or straight into the power amp. So I hope that's
helpful. Experiment and have a good time. So until the next video, have a good day and don't forget to
subscribe. Thanks for watching. Well thanks for watching and see you next time on Guitar Tech, how to do it yourself.
