What A VT Operator Does On Set Crew Breakdown

Filmmaking Techniques
4 followers
This video is sponsored by Squarespace, the all-in-one platform that you can use to easily
craft and manage a website for your business. The VT operator is one of the least talked
about crew positions in film production, whether that's on YouTube or the internet in general.
They're responsible for orchestrating the live transmission and playback of video and sound via
production monitors. It's a role which is a necessity for any industry level commercial
or feature film shoot, and one that every technical film crew member should understand.
So I'll use this video to try and fill in this information gap based on my
observations from working as a crew member in the camera department,
by first unpacking the role of the VT operator, going over what an average day on set for them
might look like and finally giving a couple of tips which I picked up from watching experienced
VT ops work. The process of shooting a movie involves capturing multiple takes of shots
until the director is happy that they have a shot which will work in the edit.
This means they need to be sure of both the technical aspects of the shot, such as the
framing, camera movement and focus, as well as the content of the shot, such as the performances of
the actors and the blocking. Since getting the perfect shot can be a bit of an intricate dance,
filmmakers need a tool which they can use to monitor these live takes and evaluate them.
This is where VT comes in. The Video Tape Operator, also called Video Assist, Playback
Operator or VT, is responsible for setting up video monitors that have a live feed from the
production camera, or multiple cameras, and then recording any takes that are done as a video file
so that they can be played back after each take for the client, director or creative heads of
departments to evaluate. VT came about before digital cameras when productions were shot on
film. Since film needs to be developed at a laboratory before it can be viewed, which of
course takes quite a while, film cameras couldn't play back footage that had been shot on set.
Therefore, the solution was to record each take from a tiny low-res video camera inside the film
camera called a video tap. This signal from the video tap was recorded onto tape with a device
such as a clamshell. This tape could then be fast-forwarded or rewound and played back a
low-res video version of each take that the film camera recorded. Since digital technology took
over and footage is now recorded to cards rather than film, the role of the VT operator has evolved
but is still based on the same principle of providing a live image on a monitor and being
able to quickly play back video of takes. There will usually be a few different monitors reserved
for different people on a film set. This can be done by sending a video signal either through a
wired connection to different monitors or by using a wireless transmitter that can send a signal out
to multiple receivers which are plugged into monitors. The focus puller will usually get a
feed directly from the camera with a sidekick receiver. The VT operator will then transmit
or wire a feed to their station and run it through software on a computer such as Q-take,
which is the industry standard. They'll then distribute this feed from the software to other
monitors which may include what we call a video village, a tent with production monitors that
display feeds from all the working cameras that are usually reserved for the creative agency,
clients, the directors and sometimes the producers. Nowadays there'll usually also be a wireless
portable director's monitor on the set which is either put on a stand or can be handheld by the
director as they move around and give direction to various departments and actors. The cinematographer
usually operates and exposes using a 5 or 7 inch monitor which is mounted directly onto the camera
but sometimes will request a feed to a specific color calibrated monitor such as a Flanders
scientific screen that can be used to more accurately judge the exposure and color of an
image, kind of like a modern light meter. Although there's a bit of an overlap between the First AC
and the VT-OP when it comes to who is responsible for monitoring, usually the on-camera monitor
and the focus monitor feed is set up by the First AC while the director's feed and any other external
monitoring lies with VT. Before we dive into the nitty-gritty of setting up a monitor
and practical on-set VT advice, I'd like to thank Squarespace who are the sponsor of this video.
If you're involved in the film industry as a crew member, are starting your own business or need a
space to display your work online then it goes without saying that you'll need a website.
Squarespace is an all-in-one platform that you can use to design a stylish and practical website
for any business using their drag and drop templates.
This means that you don't need advanced web design skills to get your site off the ground.
Squarespace makes it easy to display your creative portfolio and film work using their
photo and video libraries. I like to use their blogging tools every week to write,
schedule and post about new videos on the In-Depth Cine website.
So to set up your online presence be sure to head to squarespace.com for a free trial
and when you're ready to launch go to squarespace.com
to save 10% of your first purchase of a website or domain.
The kind of gear that VT needs to run will be determined beforehand depending on the
kind of setups that are needed. For example the gear for tracking vehicle scenes will
be different to the kind of gear that is needed for a standard interior scene.
Therefore the first step is to plan for the kind of video transmission required,
taking into account things like transmission range and how many monitors will be needed.
There are two or actually now three ways to send a video signal from a camera to an external monitor.
The first is what we call hard wiring. This is where cable, usually an SDI cable,
is plugged from a video out port on one side to a video in port on the monitor.
The upside to this method is that the quality of the feed will usually be very solid.
The only way to interrupt a hard wired feed is if the cable gets damaged.
The downside however is that if the camera needs to move then the cable will often get in the way
and needs to be wrangled by someone to avoid getting tangled up or becoming a tripping hazard.
The second method, wireless transmission, doesn't require tethering the camera with the cable
and is therefore the most popular. It involves attaching a transmitter,
such as a Teradek, to the camera and plugging it into the camera's SDI out port. This sends
a live video signal of what the camera is recording through a wireless radio frequency
to a receiver. VT-Ops usually build their own custom mobile video trolleys that they'll mount
the receiver to. This receiver will then get fed into some kind of distribution converter
or switcher that will get fed into a laptop or computer that runs macOS.
This feed goes into the Q-Tech software where it can be controlled. This signal is then sent
out the video trolley through a hardwire, wifi or through transmission to a monitor.
The third, fairly new way that video can now be transmitted is through a live stream using
the internet. This was mainly done during Covid shoots and is now used for tracking vehicle work
where the car will drive out of range of the wireless transmitters.
With this technique a video feed is sent to a modem with a sim card and antennas,
which uploads the live video signal to the cloud and creates a streaming link.
This live feed can then be viewed by anyone with access to the internet anywhere in the world,
which is why it was used for remote shoots. So depending on the needs of the shoot,
the video assist will evaluate and provide a technical solution that aligns with the
production's budget. Once they have a live video signal up and running to the required monitors
they will wait until shooting begins. They will trigger video to record for both rehearsals
and any takes that the camera rolls on. After the camera is cut they will call out playback
and then loop the video footage of the last take that was shot on the monitors.
Using Q-take software they will also label each take that is done, giving it the same name as the
scene, shot and take that is on the clapperboard. This is a way of archiving what has been shot
and makes it easier to relocate previously shot takes, which is especially necessary when
directors need to quickly track down a specific take from a scene that may have been shot weeks
ago. VT will also collaborate with the sound department to provide audio that is synced up
with the video footage. If you've ever seen a photo of a director on set wearing headphones,
they are for listening to the transmitted audio signal that is being captured by the sound
recordist that is synced up to the video feed on the monitor. Earlier I mentioned that it's
commonplace for video assistants to label and archive each take. They may also take this one
step further by marking specific takes. As they'll usually sit near the director's monitor,
if they hear the director make remarks about a take being good, they'll be sure to mark that
specific take. The director may also directly ask VT to mark a take. This often happens during the
shooting of commercials, which involve a back and forth discussion between the director,
the agency and the client, who need to approve each shot before the production moves on.
So if say the director thinks they got it on take 4, they may ask VT to mark that take.
If they have extra time they'll then do a couple extra takes for safety,
then once they've got those extra takes in the bag, the director will ask VT to loop the marked
take on the client's monitor and then go over to them to confirm that they are happy, approve that
take and then the production can move on. On some shoots the video assist may be asked to
perform a mix and overlay. This can be done using Q-Take software and involves overlaying video or
images on top of a take. For example, some commercials may need to incorporate specific
text or a company's logo on a shot. VT can overlay and then position this logo so that
cinematographer and director can find a frame that complements and accounts for this.
Or there may be a series of planned match cuts that the director wants to do.
VT can then find the shot they want to match cut with, overlay it on top of the live feed
and mix down the opacity of the other take. They can then position the frame for an optimal
match cut. Most software these days is able to auto trigger video to record,
so when the cinema camera starts recording it will trigger the video device to record
at the same moment and likewise it'll cut when the cinema camera cuts.
However occasionally when working with some setups such as some film cameras,
the video may not auto trigger and it'll be up to VT to manually start recording video
once they hear the call of roll camera.
So this has been another episode of Crew Breakdown.
As I mentioned the information in this video is based on my observations from
working in the camera department and I've never actually worked in video myself,
so if anyone who knows more about this wants to add something please do so down below in the
comments. Also, as always thanks to all of you for watching and supporting the channel.
You make it possible for me to keep creating this content regularly.
Otherwise until next time, thanks for watching and goodbye.
