It was quite some time since I made cutting board video. I'm always thinking about new designs for cutting boards. And I finally had enough time to try it out. And I can say that I'm happy with the results :-)
Material that I use for this cutting boards are My own Walnut , Slovenian maple and oak and some zebrano wood.
When I was making them I had an idea in my mind. To make something different something that anyone would like just by the look at the cutting board . And there smilly face cutting board was born :-)
For the most part I use my Walnut ( root) and it has such beautiful figured grain and for inlays I use maple.
I porportionally draw on maple end graun eyes and mouth and cut it out on bandsaw. Than I transferred the shape onto cutting board and rout out material. Next day I sand it flush and smilly cutting board was done.
What you think about this idea? You like it? Tell me what you think in the comments above.
From 15th of January it will be possible to purchase some of my work on my website and Etsy store. From cutting boards to coffee tables and similar.
I will make an announcement and post links to the shop on 15th of January 2019.
I hope that you could learn something from this video or at least you enjoyed watching it. If so hit that like button share this video and subscribe to my channel. I would really appreciate it :-)
To have some Insights and be up to date follow me on Instagram
Here I have beautiful walnut, maple, zebrano and oak.
I cut and planed this wood some days ago and it was resting in my shop till today.
Before I started making cutting boards I make sure that I square all the pieces
from both sides on my table saw. Now after everything is squared I can
start cutting and making pattern. This is the layout of entire cutting board.
The next step is gluing and it can be a little bit complicated.
But I have a solution for that too. My simple yet effective solution to hold
all the pieces of the cutting board together
is to place wooden sticks across the board and secure it with clamps.
For nice and straight glue lines apply a little bit more glue,
place the clamps above the angled pieces and tighten them real hard.
After you tighten those clamps real strong you can put clamps on the sides.
I have bunch of new designs for cutting boards in my head
from my daydreaming and now it's perfect time to make them.
I see a lot of other guys having problems with gluing after cross cutting the board.
Their glue lines aren't straight, they have gaps on the sides or in the center.
And the main reason for that are planer knives.
Let's say for example you have 12 inch planer.
And the most material that you plane is 5-6 inches wide.
That means in time planer knives won't get wear equally and in time that creates a curve.
I have a solution for that too. I don't have a drum sander
but my solution is my orbital sander. I go gently in two passes from both sides until it's flat.
The next step is cross cutting. Now I'll cross cut all the boards and glue them right after.
Gluing after cross cutting is also very important.
Don't leave the pieces on the bench for long periods of time.
Here I have few example of cutting boards that I made in the past week.
They are all twisted. If you wanna make a cutting board with edge around it
make sure the edge is end grain too. Here I have a nice piece of end grain
zebrano for my upcoming video and in the next clip you'll see how it was made.
Here I'm making handles with shop made jig. By going fast and routing in opposite direction
you will minimize the tear out. So, tell me which board you like the most.
I made plans for most of these designs and cutting boards will be available in my Etsy store.
To learn more about that visit video description.
That's it guys. I hope you liked this video and if so,
hit the like button and subscribe to my channel. And as always, thank you for watching.