I'm back with another vlog from Thunder Mesa Studio - wow, two in a row! This time it's a discussion about testing and adjusting tracks and trains to make sure everything runs the way it should. I address some track issues and run a new On30 loco on the Goldfield & Calico, and take a train up the grade on the HOn3 Barlow Pass. All that, plus your questions in this week's vlog.
Become a Thunder Mesa Member on Patreon for early access, exclusive content, and members only parts and details from the builds! https://patreon.com/thundermesa/
All music courtesy YouTube Audio Library, Creative Commons License.
AI Generated·May contain errors
Video Summary
AI Generated
Dave provides an update on the Thunder Mesa Studio, focusing on the Latigo Mining Company kit and his goal to restore the main loop by December. He emphasizes a \"test and adjust\" philosophy to resolve track and electrical issues and conducts grade testing on the Barlow Pass layout, while offering expert advice on scale adaptations, scratch-building, and scenery techniques.
Hey guys, Dave here at the studio coming to you with another vlog. Look at that,
we made it two weeks in a row. I'm on a streak here, I really am.
We did this last week and a lot of people seemed to enjoy the format and asked for more, so hey,
we're doing it again. Doing another vlog and hopefully I can keep it up week after week.
We'll see how it goes as long as I have the time. I will be more than happy to share with you
what's going on here at Thunder Mesa Studio. Let's see, today, well right now I'm still working on
the pilot model for the Latigo Mining Company office, which is the next kit coming from
Thunder Mesa Kits. I'll throw a piece of concept art up there on the screen so you can check it
out, but I'm not quite ready to show it off yet in all its glory. I gave you a little sneak peek
last week, but I'm not quite ready to release that yet, so use your imagination. You guys were
great in your responses last week. A lot of people came through with questions and things like that,
and we'll be answering all of those towards the end of this vlog, so stay tuned for that.
Now I'm back here in the train room where the Thunder Mesa Mining Company is located, and I've
been doing a little bit of work on that as well. I think by the time you see this, you may have
already seen the 15-year retrospective video that I did. It's been 15 years that I've been working on
this layout, the Thunder Mesa Mining Company. As I say in that retrospective,
over those 15 years, it's been moved twice, it's been completely broken down, reimagined,
rearranged, rewired, all of that, and it's still my favorite layout. It still keeps chugging along,
and this year I am looking forward to, well, let me put it this way, after watching that
retrospective and seeing those glory days of the layout when it was up in Jerome at my Jerome
studio with everything working and all the trains running and all the backdrops painted,
all that stuff, it really, really got me right here and made me want to jump on this and get it
done. Not done, you know, it's never done, but to get some more progress on it this year.
It's October right now, just started October, so we're in the fourth quarter of the year,
and so that just gives me three months. I would really like to get Thunder Mesa
running again on the entire loop. It runs, it has power to it. I can run trains back and forth,
but I want to get the main loop going again like I had it before, and I would like to get that done
by my birthday, and my birthday is at the end of December, and it's a big one. I'm turning 65,
so you know, I would like to feel like I've accomplished something this year, and so I want
to get the Thunder Mesa layout running again by the end of December in the complete loop,
and that means finishing the bench work and the roadbed and the track work for the new canyon
section, the new Coyote Canyon section. If I'm keeping track, this is probably the fourth
iteration of Coyote Canyon, the new Coyote Canyon section and the new Latigo section,
so let me flip this around and you can see the general area that I'm talking about here.
So yeah, here's where we're at. Rainbow Caverns are in disarray. We've got LEDs hanging down,
need to do some work in there. I'm going to extend the caverns. There's going to be another scene
right over in this area, but the main thing is I need to build the bench work here.
I've got a stand that I've made, and this is basically the bottom of the canyon,
the bottom depth of the canyon, maybe an inch above this. So, you know, we're going to cross
this on three levels here, three different levels of track, and then it comes around here. Pay no
attention to that mess, and this is where the new town of Latigo is going to be located
back up in here, and there's, of course, the Gold Tooth Mine that I built not too long ago. That
was the first kit we did, and Latigo will be home to all of the different kits coming from
Thunder Mesa Kits, and so I really need to get that bench work done so I have a place to put
those kits as I complete them, because right now we're doing stuff like this. So, anywho,
and, of course, the backdrop. I want to at least get the sky in on here, right? It's been that
white color for almost two years. I really need to paint that blue. That will really improve the
look of things quite a bit. So, those are things I would like to get done by the end of this year,
by the end of this year, 2026. I'm telling you now so, you know, you guys can keep me honest
and say, hey, Dave, you said this was going to be done by the end of 2026, and so if I announce it
publicly, it makes me feel like, yeah, I got to do it. I got to do it. I got to get it done,
and it'll make me feel so much better, and it'll be a nice birthday present for myself.
But the main topic for today is actually something a little different. It's the concept of test and
adjust. This is something they talk about at Imagineering, and I'm wearing my
Imagineering t-shirt today, the original, and this is something to talk about at Imagineering.
It's a process. Any time they bring a new attraction online, there's a period known as
test and adjust, and that's when the Imagineers work with operations to make sure that everything
works the way it was designed to, and is safe, and fun, and enjoyable, and all that for the guests.
And, you know, and at that point, so they test all the engineering that went into it,
and then they adjust. They make slight adjustments here and there to make sure that everything works,
and I find that that concept translates really well to a model railroad also,
especially if you bring a new piece of equipment online, like I'm doing here on the Goldfield in
Calico. There's a period of test and adjust, and I spent yesterday doing that, and it was a lot of
fun. You know, sometimes I just like to screw around with trains, as my friend Dale Engel would
say. It's all about screwing around with trains. So, yeah, I did a little bit of testing and
adjusting, and I found a couple of problems, and I solved them, which is always very gratifying,
and once again, we'll flip the camera around, I'll show you what those were. But first, let me show
you this new equipment that I was testing out. Let's get it running here on the line. These are
some really cool 3D-printed gondolas, mine cars, ore cars from Carroll Creek Designs.
Let's bring that up in front of the station here, and pushing them is one of the newer
Bachman 060s. It's basically the same chassis and power plant and everything as their 260.
They just knocked the front pony truck off, and for some reason, they put a small four-four-row
tender on it, but I picked this one up on eBay. It's got tsunami sound, and it's been
upgraded a little bit. It's got to keep alive in it, and I wanted to test it out, and I thought I
would test out these cars at the same time. I've had them for a while, but I've never run them on
the layout, so obviously they haven't been painted or detailed or anything like that.
I just thought I'd throw them on here and see how everything worked, and one of the first
things I discovered during testing was that I had a problem with the track right here.
The four-four-rows went over it just fine. This big girl did not, and what I discovered was this
joint here. I have a bad track joint. This is where two pieces of flex track are soldered together
on a curve, and probably through expansion and contraction, this had become kinked. It pushed that
out, so I spent a little time working on that. You might be able to see there's a couple of little
brads going down in there. This is a trick I learned. It's kind of a kind of a redneck way
to fix it, but it does work if you have a wooden subroadbed like this. Take these brads and use a
nail set and hammer them down in there, and then you can use that nail set to make very careful,
just kind of tap-tap adjustments on these nails on that joint, and I got that just perfectly back
into gauge. I also had to do a little bit of filing up here because I had a bit of a hump
that was causing a derailment, but that is all fixed now. So I did some testing, did some adjusting,
and now that works, and once that's painted and ballasted, nobody will ever know unless they watch
this vlog. Another problem I discovered, much to my chagrin as I was testing a new locomotive, is that
it was stalling on this turnout every time, and I tried a couple other different locomotives,
and they also stalled on this turnout, so obviously the problem was with the turnout. What I found was
this piece of track here, this piece of rail coming from the frog, was dead as a doornail.
It wasn't getting any power at all or not enough, and that was what was causing
the locomotive to stall. When I figured that out, because when you flip the switch the other way, it went
through fine. You flip it back this way, and it would stall, and you know, I have frog juicers
on all of these turnouts. I've done videos on the frog juicer. It's a great product from
Tam Valley Depot. I highly recommend them, especially for DCC layouts like this. I'll show
you, this is the frog juicer in question right here. You can see all the different wires coming
in. Each one of those wires, those green wires, is coming from the frog of a different turnout,
okay, and this one on the end is coming from this turnout, and so I went back and I traced
all the wiring for this to make sure, you know, it was hooked up. You know, I thought maybe, oh no,
maybe this is like worst case scenario. Maybe the wire had come, had broken off or come
unsoldered somehow from the frog here, and then I would have to pull all this up and fix it,
but through a process of elimination, I actually found out the problem was here. You can see that
shiny spot. The track power is fed to the turnout from this end, fed in this direction,
and I had a bad solder joint right there, another bad solder joint. That seems to be a theme. Maybe
I need to work on my soldering skills. Anyway, I unsoldered that and re-soldered it. You can see
it's not very pretty, but you know, I'll paint it and put a weed in front of it, and again,
nobody but you and me will know, and now it works great. It works just the way it's supposed to,
so hallelujah. So let's go ahead and put her through her paces now and see how she does
using an NCE power cab. This is my preferred system, DCC system, for just about all the layouts.
Starting off at speed step two, bring it up to three. I'm close to the crossing here,
so I'll blow the crossing, hit the bell, and we'll take her around back behind the backdrop.
Now I'll throw the Johnson bar, put her in reverse, and speed step two. Love it. No issues.
I've been doing a little bit of testing and adjusting over here on the Barlow Pass layout
as well, and I'm a little embarrassed to admit this, but I hadn't really done a lot of testing
on it up until, you know, yesterday. I mean, I laid all the track and the turnouts through the
town of Barlow Pass, and I tested all that, and all that worked really well, but the main thing
I had not tested was the grade. I calculated the grade at two and a half percent. I built the
bench work, got all that done, but I never actually tested to see if my equipment would make it up that
two and a half percent grade. So that was the test I wanted to do. I wanted to make sure that all of
my equipment would make it up there. All the locomotives would make it up that two and a
half percent. Now, two and a half percent is not a huge grade. I mean, a lot of people build
layouts with, you know, up to a four percent grade or more, sometimes by accident, but I just wanted
to be sure that everything worked the way it was supposed to and to see if I had to make any
adjustments if it didn't. As I explained last week, I have this Kato Blackstone HON3 unit track,
and I thought, well, what I could do is set it up on the roadbed, since the track has not been
laid through here yet, and run a couple of feeder wires to it, and I could test the grade. This
I unplugged the DCC bus from the power cab system and plugged in the feeders that go up to the Kato
unit track, and I've got my smallest locomotive. This is a Denver and Rio Grande Western C19,
number 345, 280 consolidation. C19 is what the Rio Grande called this particular configuration,
and I've got it set up with one, two, three, four, four cars and a brass caboose. That caboose
is pretty heavy. It's a lot heavier than one of the plastic Blackstone cabooses, so I thought that
would make a good test here to see if we can climb the grade, see if we can actually make it up
to Barlow Pass. And let's see, down here on the riser, you can see we're at
zero elevation, so starting there, let's see how it goes. Now, in order to make this a fair test,
of course, I cleaned all of the track thoroughly and made sure the trucks on all of the cars were
free rolling with any snags or hangups. I'm using, once again, an MCE power cab,
got Loco 345 selected, and without any further ado, let's see how she does.
That's speed step three. I'm going to bring her up to five because she's got to be working up
that grade. The grade starts right about halfway through this bridge. I'm going to do this whole
thing without cutting so you can see that there's no shenanigans. Going through the tunnel just fine,
coming out the back stretch into, this will be where the Fickle Lady Mine is located,
and then we start the climb from Elk Park. And this is pretty typical of the size of trains I
want to run on the Barlow Pass. I really like these C19s. I do have a K27 also, but I really
like the C19s. They're my favorite locomotives of the Rio Grande. It's like we're making it
up the grade with no slippage, no stalls, no problems whatsoever. I love it. Uh-oh, end of
track. The E-stop button comes in handy on these. Well, that was fun. Everything worked just the
way it was supposed to and so there's not a whole lot of adjustments to be made. I think
we're good to go with the grade set up the way it is. It's always gratifying to know that my
calculations were correct and I didn't screw anything up. So, I think the Barlow Pass,
full steam ahead. Okay, Q&A time. I did ask for questions and you guys came through. Let's see,
John says, I am interested in a modified Barlow Pass track plan with a couple of changes.
The biggest change is to replicate the track plan at ON30 scale. Question, with the upgrade,
will the track plan still fit in 4x8? Yes, but you'll have to increase the grade.
As we just saw, the grade on it is 2.5% now, so you've got room to work with it. You could do it
in 4x8 in ON30. Again, you're going to have to test and adjust. You're going to have to figure
that out on the fly to figure out what equipment you're running, how well it will climb that,
because the reason you have to change the grade is because ON30 equipment is taller,
right? So, you've got to have more clearance than you would HON3 clearance, ON30 clearance. I'm
exaggerating, but you get the idea. So, yeah, you're going to have to increase the grade.
So, yes and no. Yes, it will fit in 4x8, but no, you can't do it with the current
grade of 2.5% that it has. John continues, I like the idea you mentioned in your blog about
adding a turnout at Lonesome Gorge. I am envisioning attaching a 4x4 staging spur
or a Sierra West Deer Creek Sawmill. Cool, that's a great, great kit. The next modification is to
replace the turnout at Elk Park Junction with a double crossover turnout. You're a braver man
than I. No, that'll be fine. That'll probably simplify things. Final item on the wish list is
to make the layout dead rail. Question, given the changes in grades, do you think it's plausible?
Yeah, you could make it. Yeah, like I said, yes, you can certainly do a dead rail. Dead
rail doesn't change how well the locomotive will climb or anything like that or the pulling power
of the locomotive. It just changes where the power comes from. Instead of coming from the rails,
it comes from the battery. So, yeah, it should be fine. But like I said, you're going to have
to increase the grade just to make sure that everything's clear. So, test it with your
tallest piece of equipment and go from there. Paul asks, I'm not even going to bother with
last names. Paul asks, also for Barlow Pass, unless you build a further extension to Barlow Pass,
how do trains get back up the hill? They'll have to reverse and make the
turntable redundant. Yeah, I got several comments like this, that I should keep
the reverse loop as well as, so have it, you know, do that and as well as have the continuous run.
You could disguise it as a mining branch. Good idea. And it's pretty obvious on the face of it.
It's a really good idea. The only catch is, does it work with the track geometry? You know,
given that I'm using basically 19 inch radius curves, which is about as tight as I can get
away with on there, and where the turnouts would have to be located, is there enough room there
to have the turnout, you know, one this way and one this way and make that work and still have it
have the continuous run that I want? That's the question. So, the short answer is, if I
can make the track geometry work, yeah, sure. I like it. If not, the idea is to build on,
as John was saying, a little staging yard or something like that that comes out where the
trains can be turned around. So, track geometry is something you have. It's really easy to draw
lines on paper, but you'll find that once you start actually putting those number six turnouts down,
things don't always work out the way you thought they might. Hayden asks, I would like to do an
ON18 micro layout. I have an 18 inch round board that I found at Walmart, and I feel that it would
be a perfect little starter to get into O scale modeling. So, an 18 inch, I think I know what
you're talking about. It's one of those round boards, yeah, they sell in the craft section.
So, 18 inches in diameter, that's, you know, foot and a half, that's this big.
So, you're talking something a little bit bigger than the rainbow peak layout that I did, which was
ON18. And so, yes, it can be done. The hardest part of that will be curving the track and getting
a smooth circle. Next question that Hayden has is, could I use HON30 3D prints as a body for
an ON18 locomotive? Absolutely. Obviously, upscaling some things like, yeah, you need to
upscale the cab and the stack. Probably the stack should be a little taller than the cab,
so we don't get smoke in the engineer space. And maybe the domes, something like that,
but all those parts are available out there. But that said, there are ON18 bodies, 3D printed
bodies out there that you can get and put on an N scale mechanism.
What size do locomotives and rolling stock need to be in O scale? Well, they need to be
big enough for the people. So, I always make the cabs and things like that, any cars with roofs,
at least six feet tall in O scale, which is an inch and a half.
Actually, HO scale standard gauge cars are a really good width for ON18 because they're about
five feet in ON18. So, yeah, that works. So, five feet that way by six feet this way,
and you've got it. Everything else, as far as, you know, all the bells and whistles,
if you'll pardon the pun, you know, that doesn't necessarily have a scale. They'd just be smaller.
It's a smaller locomotive, so the valves would be smaller and, you know, all that stuff would
be smaller. So, you can get away with using stuff from smaller scales. It just is smaller in ON18.
I do it all the time. What materials can I use to scratch build rolling stock,
locomotives, and structures if I have a tight budget? Again, we're still talking about ON18
N scale. Go to eBay and search for N scale old time, N scale old time, and you'll find
all kinds of stuff from Bachmann and Lifelike and some of these other manufacturers, Model Power,
and you can use those trucks, and you can use the couplers, too, if you like. You can use the
chassis. You can build them. You know, I did a thing where I built, you know, an ON18 flat car
on an N scale chassis, and, you know, the wheels will be small, but like I was saying, they're
just small. They're not necessarily out of scale. They're just small. So, yeah, if you're on a
budget in particular, go with used N scale equipment. There's a ton of it out there,
and it is cheap. Would HO wood track ties look right on ON18 track? Yeah, they'd be just about
perfect. You want to handle a track? That's a good challenge, because I think it would look amazing.
Yeah, HO scale ties would work perfectly. Next question. James Chase asks, thank you for the
great rock techniques. I've been working on using them on my club layout, but I keep getting asked
where I learned. Well, just tell them to subscribe to the channel. Come on. Hence the question. Is
there a specific video that you teach all of your techniques or possibly a playlist of them?
I don't really organize things that way. Maybe I should. You know, I organize them by project.
Probably the best place to look would be the Bandit Canyon Railway project, Bandit Canyon
Railway playlist. There are two or three videos in there on some of the best rock work I think
I've ever done was on the Bandit Canyon, and so check that out. Check out the Bandit Canyon Railway
playlist, and you will find all of my rock techniques there and how to paint and color them
all too to make them look groovy and southwestern. Where or when would you justify putting plaster
rocks on the ceiling of a tunnel? I was working on a tunnel, and a member asked why I put rocks
on the ceiling if no one can see it. Legitimate question. I told them that since it's above waist
height, then they could be seen, especially from little ones. Good point. Sometimes we get to, you
know, crouch down and see what things look like from a kid's perspective. Is this a good philosophy
to go by, or do you do rocks in all of your tunnels? No, I don't do rocks in all of my tunnels.
Where it is visible is a good philosophy to go by. Where do you think people will see it?
Like on the Gold Hill at Calico we were just playing with over there. The tunnel has a ceiling
because it's not plaster, but it's foam. It is removable, however. I can lift the whole thing out
in case there's a problem in the tunnel. We need to adjust. So yeah, my philosophy is, yeah,
if it's possible, if somebody's going to see it, have a ceiling on the tunnel. If they're
not going to see it, don't bother. But either way, make sure there's access to the interior
of the tunnel. That's the most important. And finally, Tortugan Tails, I like it,
piratey name. Is the coming Dead Rail project a Halloween project like Gruesome Gulch was?
No. It is not a Halloween project. It's going to be an ongoing project, but I'm not quite ready
to spill all the beans on that yet. Look for a video on the upcoming Dead Rail project soon.
I will tell you what the name's going to be. It's going to be called the Rolling Thunder,
and it's kind of a spinoff, once again, from the Thunder Mesa layout, but it's not going to be
specifically a holiday theme. It's not going to be Halloween themed, and it's not going to be
Christmas themed or anything like that. And I think that about wraps it up for this vlog. I
don't have anything else to share. I don't have any other questions to answer. Thank you all so
much for hanging out with me for a little while and joining me today. I hope you enjoyed it,
and if you did, leave a like and a comment. And if you have any questions, once again,
like those guys, put them down in the comments below, and I will be happy to try and answer them
best that I can in the next one. Until then, keep moving forward, everybody, and adios for now.