Stedi RGB LED Rock Light Install - The Offroad Advantage #ShedSessions

Traveling on Wheels
7 followers
4 Video Views·Oct 23, 2022
Alrighty, back in the shed for another installation and what have we got on the
shelf today? What we're going to be installing is the Rocklites by Steady.
Now, weirdly enough, I've had a few requests for this one. Now, I didn't think it would be
something that was super popular. It's more of a Yankee thing, but you know what? I have
always considered doing something like this myself. I remember seeing it in a magazine
ages ago and it was a Jeep that was up on like a rocky, real rocky section at night time. It was
this ripper photo, but all around the Jeep was lit up and you could see all of the rocks in
really high detail around where this Jeep was going on its track. And I thought then, I was
like, that is a really awesome idea. I mean, for people that are spotting you around the car at
night time and things like that, at least they can see what's going on underneath the car and
around the vehicle as well and what's coming up. What tends to happen when you're off-roading,
especially at night time, when the headlights are on, especially driving lights and you've got
really good distance out in front of you, which you can see, you start getting tunnel vision.
And that means that you just only focus on what's there in front of you. So, you don't
really focus on what's around you, especially. So, having a bit of light surrounding the vehicle
is definitely a good thing. So, yes, these are cool and yes, they look awesome when you park
up at your Coles car park and you throw them on in disco mode. But they actually serve a really
good purpose for off-roading. Not only what I've just mentioned as well, another thing that I've
just thought of, when someone's driving up behind you as well, it's probably going to illuminate the
track around you. So, the person that's going up on that track after you can see sort of what's
coming up as well. So, if there's a big rock in the way, they're going to be able to see that rock
as well. Or a big drop or a big washout or something like that, they're going to be able to see it. So,
you're not only helping the spotter yourself, but you're also helping the person behind you
if you're in a convoy. So, these lights have heaps of different options, guys, and really,
really good idea of something to put on your car. And they're not extremely expensive. They don't
cost a lot to do. And it's quite easy to do with the kit that I'm about to show you from Steady
Lights. They've made this really easy to install. Okay, so I'm thinking for the positioning of my
lights themselves, I'm going to put two in the middle. So, I've got six lights in total in this
kit. So, I'm going to put two in the middle sort of area here. And I'm going to have one of those
lights shining towards the back of the vehicle, towards the back wheel. And then the other one's
going to be going down here towards the front wheel. So, I'm going to try and light up
both front and back wheels and try and maybe point them out a little bit as well so they kind
of shine out as well as on the wheel because they do have quite a good spread on these lights. So,
I'll try and illuminate that area. So, that's four. So, two either side. And then I'm either going to
put two up the front of the vehicle. So, maybe on my skid plates on either side of the bull bar there
in a safer area if I can find one to drop down either side of the car, which will also illuminate
the front area as well. So, that'll be good for myself and for spotters. I'll either do that or
I'll only put one up the front and then chuck one up the back, which at the back of the vehicle
would be quite handy for spotters and also people coming up behind me in a convoy maybe like I was
saying before. So, I'll either put one at the back or the front and two on the side or two up the
front and two on the sides. I'll try and figure that out as I go and have a bit of a think about.
I'm not really sure the best way to go. All right, guys, let's get stuck into the unboxing of
these Steady Lights and then we'll get stuck into the installation. So, that's the box that it comes
in. The instructions and a bit of information on these rock lights. These are the Steady LED rock
lights themselves. Got six in total in this kit, as you can see there, and they're housed nicely
in this protective foam. Okay, and underneath that we have the mounting plate. So, these are rubber.
Okay, they're not metal. So, they're moldable to the surface a little bit, which is fantastic.
And in there we've got some plastic grommets there to go in the holes for when you put the bolts or
the self-tapping screws through and that's all supplied. So, we've got all six in there. Okay,
and then we've got the last piece of the puzzle is the actual wiring loom itself and everything
is supplied. Like most of the Steady stuff, it's all supplied in the box. So, really don't make
you have to get anything yourself, which is awesome. So, pretty simple. We've got our earth
and power strap there. That's to go onto the battery or whatever supply that you're using
and that is attached to the main harness here, which has an inline fuse ready to go
with a fuse in there and that is your switch on and off switch to toggle the rock lights. Now,
that switch is interchangeable. I have actually got myself a different switch to that one. One
that fits into the center console area on the MP300. You can purchase that from Steady as well.
Then on this end of it, we've got the control box for the rock lights. Now, that control box is
IP66 waterproof rated and on this end of it, we have the splitter into the harnesses for each
individual rock light. Now, these are a screw type fitting and they also have a seal on there to help
with the waterproofing. So, then we've got each individual rock light here. Now, that's the rock
light. It has a nice hard aluminum housing around the outside of it and these are also waterproofed
as well. So, all good stuff there. Now, each individual lead is different lengths. So,
that one's 3.5 meters and I saw a 5 meter one. There is one there. So, that's 5 meters. So,
they're different lengths leads in case you need to go to the back of the vehicle. So, we've got
3.5s over here. Got another 5 meter there. 3.5 and a 5 meter. Okay. So, we've got three of each.
Rightio. So, that is the unboxing now complete. So, that is pretty much everything there
laid out that comes in the kit. Now, there is like the tiniest bit of sun poking through outside
and in Victoria, in winter, this is unheard of. So, I'm going to put the knob outside. I've got
it out there and I'm going to do this workout there today. I reckon we're going to take it
out of the workshop. I'm going to get it out in the front there and... How's it going, mate? Hey,
mate? Oh, mate's looking at us. All right. So, we're going to get out the front there of the
garage and we're going to do the install out in the driveway. Rightio. So, what I'm going to do
is I've got this square tube. I'm just going to basically cut it straight down one side of the
tube. So, cut it straight down there on the saw here and that's basically going to give me two
pieces of angle bracket which I can use to then go onto the chassis and mount the rock lights onto.
So, I've just put the steady light into its rubber mount, but when the lead comes through
the bottom there, so you just feed the lead in through there, that's stretchy rubber, so you feed
it through. Basically, there's nowhere for this lead to go. It's almost like it needs a hole in
bracket which I could drill out, but what I'm going to do instead on these rubber mounts is I'm
just going to take a small notch of rubber. It's quite easy to cut into with a blade. Just cut it
off. That line can sit straight in there basically and then when it's mounted up against a flat
surface like it will be, it'll come straight at the end there without obtruding on anything.
Okay. So, I'm just going to measure the rock light itself end to end. Okay. So,
it looks like they're about 70 mil long. So, what I'm going to do is I'm going to grab my
plates that I've just cut up and I think they should be, from my measurements, they should be
about 140. Yep. So, a little bit of extra there. I've just left a couple of mil on the end just
for extra cutting material. So, that is pretty much 140. So, if I cut down the center of that,
that means I'm going to have exactly enough to mount these rock lights straight on.
Alrighty, guys. So, I've just done the test for the brackets on the chassis for the rock lights.
I'm really stoked with how they've come off. I reckon that's going to be absolutely mint.
Now, I've got the other three that I need to do over here. So, that's the finished one there.
That's completed. Well, I've just got to put some paint on it, but I'll do that once I've
done the rest of them. And then I've got the other ones here. So, I've just got to tap and drill them,
sand them back to get a nice finish on the outside, paint them up, and then I'll put
them all on the chassis rail with the rock lights and we'll start wiring it up.
So,
much over spray. Righty-o. So, I've got the bolts there. Now, I'm going to chop them down because
they're quite long. I definitely don't need them to be as long as what they are. So,
I'm going to chop them down. Now, a quick tip. Whenever you chop a bolt down, make sure you put
a nut on the bolt first. So, screw the nut down past the mark where you're going to be cutting it.
Okay? And what will happen then is if you do that, once you make the cut, then you'll take the nut
off and that will re-thread the end of it as you pull the nut off. So, that way you won't have a
coarse thread on the end which you won't be able to screw a nut onto. So, if you do that before you
bolt, you'll never have a problem. I've taken them down to 25 mil, pretty much about half what
they were. So, that'll now give me enough length without having them too long and sticking through
too far on the other side. Now, this could differ depending on your application, but for me, that's
as much length as I'll need to get it through to the other side and get a nut on there. No worries
at all. How's it going, man? Yeah, good, thanks. Cheers, dude. Thank you. Have a nice day. I don't
always Uber Eats, but when I do, I get a jumbo kebab and a large chips. So, I painted up those
brackets. I had them in the paint room. They weren't drying because Melbourne. Melbourne sucks. And then
I put them outside in the sun and they still weren't drying. So, what I've done, I've turned the heater
on in the car. I've turned it into an oven. I've cranked it on the foot, on the foot heater down
the bottom. They've got an old foot heater and those brackets are now finally starting to dry up with
the heater cranking. Okay, so now I'm just going to take the side plates off the bull bar, mark them
out and drill some holes ready to mount the rock lights on either side. So, I'm not going to mount
them on the back of the car. I'm going to put two up front, one either side of these skid plates.
I'm just going to use some paint on the holes that I've drilled as well, just to make sure they don't
rust. Okay, so you guys are going to want to use one flat washer on the bolt head and there's these
little black plastic inserts. They just go into the steady rock light itself. Okay, then you put
the bolt through and then whichever way you want the wire to be coming out, put it up that way
and then on the other side, all you want to do is use the supplied nuts and they're a nyloc nut.
Okay, so you don't need to use any loctite. The nyloc nut is a loctite, so they're good to go.
So, straight on, tighten them down and you're done. It's time to mount the brackets onto the chassis. So,
these are brackets that I've made up. Guys, you can obviously do whatever you want to do. You do
not have to use these brackets. You can mount them onto the chassis or onto the body, in the
wheel well, wherever the hell you want to go. This is just what I'm doing guys and you might want to
put them into the chassis. So, if you do, what I'm going to use is these parts here. So, as you guys
know, I am a massive fan of nutserts. Okay, so I've got my nutsert tool here from H&B Warehouse on
eBay. You can use the code JPCAPTURED to get a discount off that tool and then I've got my nutsert
kit over here from H&B Warehouse as well. So, what I'm going to be using is M6 nutserts and a
series of M6 bolts. Now, I've got a spring washer and washer on those ones ready to go. So, I've got
a total of eight here that I'm going to be using because I've got four brackets with two bolts
each in them. So, I'm going to go ahead and start putting those ones into the position that I want
them to go in. But as I said guys, this is just an idea of where I'm going to be mounting them. So,
you don't have to do this if you don't want to. You can mount them in the wheel well, the chassis,
the body, the windows, wherever the hell you want. You can mount them to the freaking engine.
Wherever you want like guys, you can put it there. This is just how I'm going to be doing it and
showing you what it is before and after and things like that. So, just use this as a bit of a guide.
Okay, so to use a nutsert tool, it's super easy. Open it all the way up, screw the nutsert on,
put it into the pre-drilled hole. In this case, it's nine millimeters as per the guide and just
clamp all the way down and then open it up. That's an automatic tool, so it makes things
nice and easy. Check your thread to make sure it's all good. Good thing about these, if something
does happen to them, they're very easy just to drill out. All you need to do is put another
nine millimeter drill bit through that hole, through the center and it will drill the whole
thing out and you can just put a new one in. So, there's no need to worry about using them.
They're really easy to use. Okay, so once you've done one, you can put your bracket in,
grab yourself a marker and then mark the next hole. Oh my god, he's drilling into his chassis.
I know that's what you guys are thinking right now because it's crazy. I know it's one of those
things you always cringe when you see someone drilling into a chassis rail and I don't blame
you. It's kind of scary, but what it is guys, what I'm doing here is I'm mounting on the brackets to
position them where I want the light to shine and there are some rules when drilling into a chassis.
Generally speaking, you have to have the bolt holes no less than 50 millimeters apart from
each other and you can't have the holes that you've drilled anywhere between 40 mil from the
top or the bottom of the chassis rail vertically. So, you need to make sure that it's more central
than anything if that makes sense. Now, you can't have holes bigger than 17 millimeters drilled
into the chassis either. It needs to be below 17 millimeters in size. Now, that doesn't mean that
doesn't need to be cited by an engineer. This could still mean that you need your engineer to
certify any holes that you've drilled into your chassis or any chassis modifications whatsoever.
So, this does vary state to state guys. If you're worried about it, check with your engineer before
drilling into your chassis. That is the best thing to do. Generally speaking, my logic behind
drilling into the chassis is try not to do it, but if you are going to do it, fill the hole.
So, if you drill a hole in the chassis, fill it with something. I've put a nut cert and a bolt
in these holes so structurally it has something in there. You don't have to use any Loctite on
these ones because we've got spring washers on them. If it was just a bolt and a flat washer,
then you'd use some Loctite on there. Put the rock light on, just do a bit of a test fitment,
make sure everything's okay. Okay, so that's what we've ended up with. That's come up better than
even what I thought it was going to. So, what I'm going to do now is I'm going to grab the
lead, the five meter lead. I'm just going to run it, jump it up onto this factory harness up here
and then I'm just going to cable tie it along this factory harness all the way up into the
engine bay, cross it over the firewall, the top of the firewall behind the engine,
and jump over to the loom. And then I'm going to go over on the other side of the car and do the
exact same thing, same spot, everything, and then we'll jump onto the front ones.
What up? Alrighty guys, so I'm up to the front ones now. I'm thinking about grabbing this bracket
and putting it roughly about there. I'm having a look at the camera to see what it looks like
on the car because I can't actually see it. But yeah, that's probably about the position I'm going
to try and aim for. Okay, how cool is that? We're almost there guys. So, that is the second last
rock light now installed. Now, there's just the other side to do. So, just got to jump on the
other side of the vehicle, do the exact same thing, exact same position, for me anyway,
on the other side of the car. And that then wraps up the mounting of the rock lights and all it is
is just basically the finishing up the wiring in the engine bay and the switch in the cabin. And
then we are done and put it to the test guys. All right, let's get stuck into the other side and
then start wrapping things up with a bit of wiring. Rightio, so that's the rock lights now
mounted on the passenger side. So, that's the front one, that other one was the back one. Now, I've also
put conduit around all of the cabling underneath the car on both sides of the vehicle. So, that's
to protect it from the elements underneath the vehicle. So, protect that cabling in the engine
bay. It's not so necessary, but under the car, definitely good idea to do something like that.
Now, I've cable tied these along the rail that we've got here. So, that's the fuel rail just on the
top of the chassis. So, I've just cable tied it to that one there and that's running all the way up
into the engine bay where we'll finish off the wiring up in there now. And they're all coming
out at sort of the same area in the engine bay. So, that's from the driver's side of the vehicle,
the wires coming out here and I've run it across the main harness on the back of the engine bay
there. I'm popping up from the chassis on the other side and just zip tied it down to that
main harness and tucked it behind the back so you can hardly see it. So, that looks all right.
Then, I've got the control box just sitting there which is also zip tied in. I found that to be
probably one of the better spots for it and I didn't have to drill any new holes and mount it
in somewhere. So, that was super easy. And then, I've got these ones coming up from here. They are
coming down from the passenger side of the chassis. So, that's those ones there. And then, I've got
these ones over here which are coming up from the bull bar. So, they give you a heap to work with.
Obviously, for bigger vehicles and things like that where you need the extra length, it's perfect.
But, for my setup, I didn't need it. So, what I'm going to try and do to tidy things up a little bit
so I don't have as much cable like a bird's nest of cable just bunched up in the corner,
I'm just trying to tape it up and create it, you know, make it a little bit tighter by just running
some tape around it. I've done it with this one here. And then, from there, I'll just try and
neatly put it into the side of the engine bay in here. There's a little hollow spot where it's got
nothing in there. And I should be able to make it look nice and tidy and tuck it away in there
and zip tie it up out of the way. So, I'll show you that once it's all done. Righty-o, guys. So, I
ended up tucking it up the back here instead of down in this corner. So, basically, I put all the
wires, wrapped them up underneath and around the top of this loom, the main harness that runs on
the back of the firewall and taped it all up and then zip tied it in there and then just ran
the connectors out the end here. Now, the fittings themselves do have a keyway in them. So, there's a
keyway in the bottom of that fitting and same with this one. So, they do go in a certain way. So, just
make sure you don't force them together if the keyway isn't lined up because you could damage
something. Once you've plugged it in, just screw the caps on and that will push the rubber seal on
the bottom there up against this face and creating a seal to help with waterproofing. Righty-o. So,
it is time to get the switch into position, guys. I'm going to be using the center console area
right here. So, I've got three blank switch locations ready to go. Now, like everything in
the Navara, this just clips out, guys. So, just remove everything from your center console area
because it will fly out when you unclip it. But just pull up on the actual center console
section and it's basically got a bunch of clips here on either side and two up the front which
just need to be pulled up to clip out and it's as easy as that. And now, we've got access to all
three locations there. From the bottom, it's just got a couple of screws we need to take out to be
able to take the plate off and they just come straight off and we can put our new switch
straight into that location. I will address something while we're in here because you're
probably going to be wondering what's going on with all this stuff here. So, I've got an extra
stalk assembly here and this is all off and everything. Disregard it, okay? Nothing to do
with this install, guys. This is actually for an upcoming video with the fog lights on my Ironman
Bullbar. So, instead of wiring in another switch for my vehicle, I went and got a stalk assembly
from an STX model car. So, this is great if you've already got an STX model or just a model that has
basically the fog light switch on the stalk here. So, I've basically bought this one. I've plugged
it in to test it and it is working with the factory wiring harness which is already there.
So, I can just wire it straight into my fog lights. I'll put that stalk in place of my factory one
here and they'll be working. So, stay tuned for that video because it's going to be nice and simple.
Okay, so what we need to do is we need to take those screws out, get one of these clips out,
whichever spot you want to use, put the new switch in and then down here, this is the wire that we
pulled through the firewall, okay? So, that's got the factory switch on there, the steady supply.
Nothing wrong with it. It's perfectly fine and it's actually quite good because it's, you know,
it's quite a hard switch to turn on and off which is probably safer because you don't want
the rock lights coming on on the road. It is a legal issue. So, this switch isn't bad. Having it
in the center console, I have thought about the problems with, you know, possibly knocking the
switch and things like that while I'm driving but hey, if you're not living on the edge, you're taking
up too much room, right? So, I'm going to be disregarding this one, taking the wires though
that are supplied on here. So, these ones here and I'm going to be wiring them directly into the new
switch and we'll be good to go, guys.
Okay, so the installation is complete, guys. Now, we need to start talking about the
application that you need to use the rock lights on your vehicle. So, for the Android, guys, you
need to go into the Play Store and for the iOS, guys, you need to go into the Apple Store and
download an application called Happy Lighting, okay? Once you've downloaded it, open it up and
this is the main screen. This is the main screen of the application where all of the main stuff
happens really with the rock lights. So, top right-hand corner, you've got some basic settings
here. So, you've got user guide, background. You can change the background of Happy Lighting
application. You can do some shake notifications and there's a little bit of about information on
the app itself. Top left-hand corner, you've got your devices that you're connected to. This will
do that automatically so you don't have to worry about setting it up but I've changed the device
name to rock lights just so I know what's connected. And in the middle here, on the top
of the screen, you've got your on and off. So, basically, when it's green, it's on. When it's
not, it's off. That's for the rock lights. So, you can turn them on and off from the application
which is pretty awesome as well. Below that, we've got our color wheel. So, you can change your color
wheel to some different types and basically, that color wheel is going to allow you to adjust
the colors in real time on your vehicle. So, the RGB rock lights are going to be adjusting in colors
now on the car as I do that. So, you can do a whole bunch of variety of different colors and
bits and pieces. Below that, you've got your brightness setting. So, you can dial that all
the way down or halfway. Then below that, you've got some preset colors here so you can run through
those. These are probably some of the popular color options that the application just put up
on the front there. Below that, you've got some standard ones. So, you've got your standard
lighting there and you've got your RGB white which in my opinion, the RGB white preset is
probably one of my favorite for actually using the rock lights to do stuff off-road. So, seeing what
you're coming up against and stuff like that, that puts out one of the best light outputs in
my opinion and a good crisp light. So, you can go through all those different presets as well
down there on the standard features. Then below that, you've got your music adjustment there. So,
if you click on that, you'll have to allow the device to connect to music and that will basically,
the rock lights will bounce and change color according to the music that you're playing.
Same with tape. Basically, that's if you talk into the phone, you're talking into it,
it will change based on what you're saying or singing or whatever you're into. Then you've got
styles over here. So, these are some preset styles. So, you've got things like rainbow
jumping and stuff like that. So, you can roll down on the selection there. I've got a popular
one here, which will be the red and blue flashing. So, you can change plus or minus
as well on the dial there to adjust the speed that they're going to be flashing and changing
color. Then you've got timing on the end, which is basically allowing you to time your own settings
and do your own setups to your rock lights and have them change color as you see fit.
But basically, all the main adjustments are happening right here on the main screen.
Really user-friendly, guys. Super easy to use. Rightio, guys. That is the install of the steady
rock light kit now complete on my vehicle. And this came with absolutely everything in the box
that I needed to install it straight onto the car. It was really straightforward, guys. I don't
actually think there's anything that we really need to address that was difficult during this
installation. It was all in there and it was all very straightforward. The application, as I showed
you before, when we were playing around with the rock lights, that's all super straightforward as
well, guys. Works really nice and you can select all your colors and different bits and pieces
there. Now, these aren't very expensive either. I was surprised at how well-priced these were
when you compare them to some of the eBay kits that are more expensive and they're nowhere near
as good quality as the Steady products. So, go figure on that one, guys. They're charging more
for something that isn't as good. So, definitely take a look at the Steady kits. They're actually
really affordable and as you saw in the video, the quality is definitely there, guys. I'm really
stoked that I finally got some rock lights on the car. I'm going to get out in the tracks and I'll
put them to the test in a really dark situation and see how well they light up the surroundings
around me and all the rocks and the ruts and all the things that you normally can't see. But now,
I'll be able to see with the rock lights and it also goes for my spotters and people around me
as well. They can see what's going on and they can maybe choose a different line. If I get stuck,
they can see what happened and they can go around and get the hell out of there. So, I'm really
stoked. I always want to do rock lights on my car, guys. I've finally done them and now it's time to
get out and test them. So, that'll be in a video real soon for you guys. I'll make sure I put them
to the test on a bit of a night drive. Maybe we'll do it after we do the rest of the Steady gear. So,
I've still got light bar. I've still got driving lights to install and we've got some rear reverse
lights as well. Some LED reverse lights which should be pretty cool. That's an easy install.
We'll knock out soon for you guys as well. Anyway, thanks a ton for watching. As always, guys,
if you enjoyed this video, drop it a thumbs up for me and if you have any questions,
drop them in the comment section below, guys. I'm happy to have a chat about anything down there. If
you've got any questions, hit me up. I will reply and if you haven't already, make sure you subscribe
to the channel, guys. Plenty more content coming your way really soon. Thanks for watching, guys.
I'll catch you in the next one.
