Spray Painting Furniture | Rust-Oleum Chalked Aged Gray Spray Paint Makeover

Contruction and Beyond
55 followers
3 Video Views·Nov 2, 2022
The first 1000 people to use the link will get a free trial of Skillshare Premium Membership: https://skl.sh/furnitureflippa05211
In this video, I am using spray paint to bring these thrift store end tables back to life. The spray paint I am using is Rust-Oleums Chalked Aged Gray ultra matte paint. I wanted to try out this product because it is super accessible to almost anyone no matter where you live! Spray painting furniture is an easy way to transform a piece from old-looking to modern.
Hey everybody, welcome back to the channel. In this episode we are painting these nightstands
or end tables that I found at a thrift store for $19.99. They're a pretty good price but this
relates to the condition that they're in. There was peeled veneer throughout and I had to fix
that stuff up and you'll see that throughout the video. But I hope you guys enjoy this one
and let's get started. First thing I do is clean up the piece and I'll just peel off the price tag.
I used some mineral spirits to get that sticky residue off and then I just wiped everything else
up with mineral spirit with mineral spirits while I was at it. Then let's remove this hardware,
flip these guys upside down because the legs had these steel covers that needed to be removed
because they were missing too many. So I just fried them all off, used a screwdriver and they
came off pretty easy. If you enjoy my furniture flips and makeovers, don't forget to hit the
thumbs up, subscribe to the channel and hit the bell notification so you don't miss out on any
of my future videos. Anyways after removing all these old leg covers, I just flipped the pieces
back over and then I started dealing with the peeling veneer. So I just peeled off what I could
and then I used a utility knife to cut off certain areas and used a scraper just to scrape off
everything that I could. So after peeling up as much veneer as I could that was loose, I started
using wood filler to fill in any cracks and scrapes throughout and then I used the wood filler
to fill in the uneven spots where the veneer was pulled up. I then sanded the entire piece smooth
with 240 grit sandpaper. Then I used my detail mouse sander to clean up the legs and make them
smooth as well. After sanding, I used a tack cloth to clean up the entire pieces just to get rid of
any dust before we start priming. Before painting, it's nice to just elevate the pieces just so you
can spray them a little bit easier. I also clean up the dirty space just to get rid of dust and
vacuum everything so we don't have any dust in our project. I'm using all spray cans for paint
products so here's my Rust-Oleum spray primer. This stuff just really helps your overall paint
adhere better. You should really use a primer especially oil-based or shellac-based when you
are using wood filler because you really want to hide that wood filler underneath. So I'm using
Rust-Oleum chalked aged gray spray paint so this stuff is pretty easy to use. You just spray it on
just like the primer but you really want to make sure your coverage is good. I ended up using three
cans but I'm sure you can get away with two. You'll see why I needed an extra third one very soon.
After applying my first coat of chalk paint and coming back the next morning I could tell the
wood filler shrunk a bit and it was quite noticeable so I decided it was time to take
out the sanders and sand everything down and we are going to use Bondo instead. Bondo is a lot
stronger as well and it doesn't shrink up like cheap wood fillers do. Cheap wood fillers are
better for small dings and scratches but Bondo will hold up a lot longer and I should have done
this from the start but lesson learned let's get this Bondo on these pieces. So Bondo is actually a
product used for vehicles. I actually used it on my old rusty truck a few years ago and this stuff
dries really hard and it does take some some hard work to sand it down so you'll see that in a bit
but basically you just mix together the filler and a bit of hardener and you mix it together and
you apply it and this stuff dries pretty quick and you want to have it on within five minutes
while you mix the hardener because it hardens up quickly. For the amount I put on and how quickly
it dries is good so within a couple hours I came back started sanding with 100 grit sandpaper just
to get through it and get it smooth and then I actually finished off with 400 grit just to make
it as smooth as possible. I also reapplied Bondo over some of the larger gouges on the top.
And back a couple steps back to cleaning with a tack cloth and then I move on to priming
but now we have this comfort grip that you guys recommended and I picked one up
and I'm ready to use it. I have a bad hand so this definitely helped me out with this project.
And round two with the H-Grey chalk paint. Although it might be harder to see on video
the Bondo actually really made things smooth. It wasn't perfect but it was a lot better than before
and it was just super smooth. I was pretty happy with the results. I ended up spraying three coats
of paint but now we're moving on to the legs. When everything's dry I tape around it and I'm
just painting them with Fusion mineral paint in coal black so I add a couple coats of that
and we let that dry. Originally I thought the hardware holes fit into the original four inch
holes but they weren't threaded so I had to re-drill holes and I messed it up and I had to
add Bondo again and then re-drill again and I had to prime and paint so it took a bit of time.
Quickly let's give it up to Skillshare for sponsoring today's video. Skillshare is an
enormous online learning community that has thousands of classes for creators. If you have
any hobbies or you're thinking about starting something new Skillshare will have a class for
you. There's some cool classes like Transform Your Furniture with Chalk Paint by Paula Pierce.
Also Furniture Making A Simple Modern Stool by Austin School of Furniture and Design.
But one Skillshare class that I really want to take is called Productivity for Creatives.
Build a system that brings out your best by Thomas Frank who is a YouTuber,
author, and entrepreneur. This class is about increasing productivity as a creator. I would
love to get some systems in place so I can provide you guys more videos weekly and just overall
become more organized with my work life. Another great thing about Skillshare is that it's designed
specifically for learning meaning there are no ads plus they are always launching new premium
classes. With an annual subscription you're only paying ten dollars a month. There's nothing better
than getting better. Accomplishing growth is extremely satisfying and Skillshare's online
classes make it possible. But even better to the first 1000 to click the link in the description
will get a free trial of a premium membership so you can explore your creativity. Anyways back to
the video I'm using Barathane finishing wax and I just take a wax brush and apply this stuff all
over the piece and then I come back with a clean lint free rag. It's actually an old t-shirt and
just buff in the wax. Well buff out the wax however you want to say it. There was a package at my door
the other day and I realized I didn't order anything so that got me pretty excited. So a
big shout out to Sabrina from Savvy Chic. She picked me up this electric screwdriver that was
on my Amazon wish list and I appreciate her supporting the channel and I'm gonna give her
a shout out to her channel Savvy Chic. She's new to the YouTube scene and has a few videos
that you can watch but I can guarantee she's gonna have some new videos soon and they're gonna be
awesome too. So head on over there and give her a subscribe. Anyways I'm using these little caps to
hide the damaged veneer from drilling holes and I'm using my new electric screwdriver thanks
Sabrina and now we're done. Let's take a look at the before one more time and here is the after.
This project didn't go exactly as planned and it turned out pretty good but there are a few
flaws from the bondo not being perfect but overall I had fun with this project and I hope you guys
enjoyed the video. Let me know your thoughts in the comments below and don't forget to subscribe
to the channel. I appreciate it.
