Quick fix for engines burning oil | How to install oil catch can | preventing carbon buildup in engine

Autos hacks
81 followers
AI Generated·May contain errors
Video Summary
AI GeneratedThis video demonstrates how to install an oil catch can to prevent oil vapor from entering the intake manifold. This modification is particularly beneficial for direct-injected engines, such as the GTI, as it keeps the intake valves cleaner for longer by trapping oil particles before they reach the engine.
Hello it's Salimic. Have you removed PCV hose and found that oil inside the hose?
Well, in today's video, we'll minimize that problem by installing oil catch can.
So, engine's oil vapor goes through PCV valve and then enters intake manifold and getting contact with the intake valves.
By minimizing that oil vapor, engine's intake valve stays clean for longer time, especially on GTI direct-injected engines.
So, we're gonna need an oil catch can. I found that on AliExpress for 17 bucks by the time I'm making this video.
We're gonna connect PCV hose here. When the oil vapor enters here, this will stop any drop of oil.
And this filter holds oil particles even more. And this goes back to intake manifold.
We're gonna need a half inch hose.
From PCV valve to oil catch can, about 63 cm. And from oil catch can to intake manifold, about 50 cm.
The reason I chose to install here, it already had 10 mm stud.
And second, it's a cold zone, far from exhaust and helps oil vapor to condensate.
Two hose clamp for the engine side, but for the oil catch can side, we don't need it. It will be a tight fit.
Some zip ties for organizing hoses.
And two 10 mm nut and a washer for fastening this bracket on the stud.
So, that's all we need for installing oil catch can.
I'm gonna start with using 8 mm drill bit for making bracket hole bigger for 10 mm stud on the firewall.
But first, let's remove it on the oil catch can and then drill one of the holes.
Alright, let's install the bracket first on the firewall.
First, nut on all the way back. And then, I like to flip the bracket so the oil catch can will be lower without hitting the hood.
I'm gonna use 17 mm wrench for removing these, so I can put some Teflon on them to prevent them from leaking.
This will be on vacuum line, so any leak will affect engine's performance.
Some oil catch cans has o-ring on the inlet and the outlet, but this one doesn't have any, so the Teflon will be the best option.
Let's put the cap back on. I like to use W40 before putting the hoses on.
So, the longer hose goes here, and the short one goes here.
Here is the final assembly. Let's put it on a bracket.
I like to twist it a bit so the inlet hose get one nice curve.
Okay, let's not forget the hose clamps.
Next, remove the factory PCV hose.
So, the short hose will be the outlet of the oil catch can and goes to intake manifold.
And the longer hose will be the inlet of the oil catch can and goes to PCV valve.
So, the oil vapor comes from PCV valve and enters the oil catch can and separates the oil and goes back to intake manifold.
Let's put some zip ties on the hoses so it doesn't wobble when the engine running.
And here is the final product for those of you owning the same car or willing to install oil catch can on a different car, but the process will be the same.
For the upcoming videos, I will give you guys an update how much oil it will separate, so stay tuned for that.
Alright, that's it for this video. Hope the video was helpful.
If it was, like and subscribe if you haven't already, and I will see you in the next one. Bye for now.
