Pottery Barn Dupe | Patriotic Pillow | How to Make A Pillow Cover | 4th of July Decor | Tutorial

Dawn Renee's Designs
8 followers
9 Video Views·Oct 29, 2022
Hey guys! I am so excited today to show you this pottery barn do. I have been looking at this
pillow on pottery barn for a couple years now and so I actually already had both of these fabrics.
I actually had all the fabric that I've used in this project and the thread so I didn't have to
go out and buy anything. So I hope that you'll follow along and you can make your own flag.
So our pottery barn pillow that I'm trying to duplicate is 16 by 26 and this is my insert so
I just want to make sure that this really is 16 by 26 before I start cutting my fabric. So let's
check that out. 16 by 26. Okay we're good. Now we can go ahead and start cutting our fabric.
So I just cut off the raw edge of the fabric and the stars portion of my pillow I am going to cut
16 by 9. I'm not going to add any additional force seam allowance because I want my pillow
to be nice and snug. You could if you want to. You could add up to an inch if you want just
some extra room in there but I'm going to cut this piece 16 by 9. So here's the stripes fabric.
I got both of these fabrics from Walmart but I'm sure that you could find patterns like this
pretty much anywhere. So with the stripes, the stripes on the pillow were going this way so I
need to make sure that when I'm cutting this fabric I am cutting it so that the 16 is from
here to here and then from the width wise I'm going to do 17 inches. This is the fabric that
I'm going to use for the back of the pillow. It's just a solid white color. I'm going to do an
envelope back on the pillow. So I need to add to my fabric to make sure that I have enough
fabric to do the envelope. So how I'm going to do that is to my width, which our width of our
pillow is 26 inches, I'm going to add 5 inches. So that gives us 31 inches and so one piece I'm
going to make the width 16 and the other piece I'm going to make the width 15 and I'm going to
continue having my height at the same 16 inches as I did with the other fabric. So this piece was
so big just like the other pieces and with the camera here it was just kind of a struggle to
get it cut. So I'm going to go ahead and get these two pieces cut down.
Again I'm cutting one piece 16 by 16 and the other piece 16 by 15. Okay so I've been
sewing on these stitches, these lines here that just give that added extra detail
and you can kind of play with this on a scrap piece of fabric and see what you like.
I had put, I don't know if you can see, this really faint line on with a fabric pencil
and then I followed that but I found that if I keep my presser foot just about right here
that I get this, you know, the the same size on both sides because you need to do
a red stitch on the white and you need to do a white stitch on the red. So I have almost all
of them done. I just have a couple more to go so I thought I would try to show you. Hopefully
you can see this. Let's see. Okay and there we have the red stitching on there.
Okay. Okay so I have all of my lines stitching done on my stripe portion
of the pillow. So now it's time that I need to put these two pieces together and
I will be honest and say that when I was measuring this out I did not take into consideration
for the seam allowance that needed to go here. However when I measured everything across I'm
about a half inch over so I'm still good. So that's something you'll want to keep in mind
if you're making this is that you do want to take into consideration a little bit of a seam allowance
for this seam. Okay so what I'm going to do now is I'm just going to match the two
good sides together and pin them and then take them over to my sewing machine and
sew them together. Okay now we need to work on the back part of the pillow. This is the envelope part
and so we have these two pieces that are going to be coming together and on each side of those
pieces we need to have a finished edge. So all I'm going to do and you just have to keep in mind
that you want to make sure you're 16 inches going this way and on this piece it's 16 inches wide and
on the other piece it's 15 inches wide. So just it gets a little tricky because those measurements
are pretty close together and you want to make sure you're you're doing the right edge. So this
is the inside edge on this piece and all I'm going to do is fold it over about a quarter of an inch
and I'm going to iron it and then I'm just going to run
a stitch down through there. So that's what I'm going to do now.
Okay so now it's time for us to put the front pieces and the back piece well the front piece
and the back pieces together and then we can sew it all together and then we'll have our pillow done.
So we have to make sure that we remember to do the right sides together. So this is my front
and here's a back piece. Now what's kind of nice with this because remember our two back pieces are
going to be bigger than our front piece is that I can use the stripe to really try to get this
straight and then what I'm going to do is use this Elmer's glue. It's just the stick of glue
and it actually goes on purple but then it dries clear. I am just going to go around the edges
and put this on the edge. I'm going to put the top down and then I'm going to go to my iron,
iron it all and then do a stitch all the way around. So the reason why I'm doing it this way
is because then I don't have to get stuck by pins which is kind of nice. It looks messy but it's
going to clean up no problem. Okay I'm going to go to the iron, iron this on just around the edges.
It just keeps everything tight until I get it to the sewing machine and get it sewn and then I'm
going to go to the other side, iron it and then actually go to the sewing machine and sew it all
the way around. The other thing you want to remember is to have your seams, you know your
edges on the inside here that you already sewn so you have that nice clean edge on your inside.
Okay so again I'm going to take it over to my ironing board. I'm going to iron around this edge
and then we'll take it to the sewing machine. So here we have it. I've sewn around the whole
entire edge and I will say I've used the glue before and it's worked really well for me.
It's nice not to be jabbed with the pins and it just really stays together nice. It gives you a
nice seam but you can always use the pins. There's nothing wrong with that. It's just a
something that I like to do. So at this point I'm just going to go around the edge, trim up just a
little bit where there's some excess, do a little cutting at an angle at the corner and then I'm
going to turn this inside out and do one final ironing before I put it in the insert.
