Trash to Treasure | Sideboard Makeover | Buffet Makeover | Furniture Makeover

Dawn Renee's Designs
8 followers
9 Video Views·Oct 29, 2022
Hi guys, it is Dawn with Dawn Renee's Designs,
and as you can see, we're just gonna jump right
into today's project.
This is my little sideboard that I had bought
a couple months ago for my dining room,
and it's super cute.
It's an older piece, and so I thought it's time
to give it a facelift so that it looks like
it belongs in my dining room.
So just working on all of the prep for it.
As you can see, I had swept it all out
with my little portable shop vac.
That thing is handy.
I had a really hard time getting the hardware
off from this piece, so I edited out the 10 other ways
that I tried to get that hardware off.
Thankfully, I was able to get it off, as you can see.
And then here I am using crud cutter.
I had never used crud cutter before,
and like I had mentioned, I'd already had this
in my house for a couple of months,
and so I had already cleaned it down multiple times,
but I used this crud cutter on it before I painted it
because I just really want to have a super clean surface.
I got it at Walmart, and let me tell you,
that stuff works really, really well.
I definitely recommend it.
Now, because I decided to use some paint
that I have on hand, which is actually paint
that I got from Sherwin-Williams,
it's the paint that matches my trim there
that you can see in the picture.
I think it's called Snowbound,
and I'm pretty sure it's Pro Classic from Sherwin-Williams,
but because I'm not using chalk paint,
and this piece had a very glossy finish on it,
so I needed to make sure that that paint
was going to have good adhesion there,
so I just did a quick sanding.
I think I probably used 60 or 80 grit,
something that was pretty coarse,
and just gave it a good sanding all over.
The top was primarily the glossiest,
but I wanted to give it a sanding all over
and then just wiped it down.
I'm gonna go through the prep here
and the painting pretty quick
because at the end of this
is where I believe the magic comes alive in this piece,
and I'm super excited to share that with you.
So this painting part,
I just wanted to go through kind of quickly.
Nothing really special about it.
I used a roller.
I used what I had on hand as far as a roller goes as well,
and I used, I think the roller was for semi-smooth
or something like that.
If I were to buy something for this,
I would probably have bought a smooth roller
for this particular project,
but anyways, I just painted it all over with a roller.
I did use a paintbrush to get in those tight places
that you can't get into with a roller.
I decided I really wanted this to have a fresh, clean feel.
So I actually painted the inside.
Down there at the bottom,
you can see there's a couple of doors.
I painted all of that on the inside.
I painted the side of the drawers.
I just really wanted to have this piece
to have a really fresh, clean feel to it.
Can you see my little helper there that's always with me?
That's one of my dogs.
I have two dogs,
and that is Lexi that's laying back there
behind the sideboard.
You can see her.
She's pretty much in all of my shots.
She's attached to me at the hip.
As I speak, she's right here by my feet.
Just to give you a little backstory
about where this piece came from,
there's a lady here locally that takes in rescue animals.
I know she's taken in horses, lots of dogs.
A lot of times these animals need medical attention,
and she has a barn full of furniture.
I'm not sure if she gets it all as donations
or how she does that.
But anyways, she sells this furniture
so that she can pay for the medical needs of the animals.
So I loved supporting her venture and her love for animals.
So I was pretty happy to get this piece from her.
Not to mention, she has a barn full of furniture.
Who doesn't want to go look at that, right?
Okay, so after I got that piece painted, I made some fudge.
So I thought it would be fun
to just kind of share that with you.
I mean, you do have to do something fun, right,
when your paint is drying.
Anyways, as a kid, on Sunday nights,
we would not have a supper.
We would have popcorn and fudge.
And so this recipe is my mom's recipe.
So here it is, just getting it poured out into the pan.
Doesn't that look amazing?
And of course you have to scrape it out,
but you don't have to scrape it all out, right?
Because you have to test it, taste test it.
Anyways, I do.
Yummy.
So here I am back working on the piece.
I just gave the top and the top only a real quick sanding.
I used, I think it was 220 or 320 grit on that.
I just wanted to have as smooth of a surface
on the top as possible.
So between the coats of paint,
I did sand just the top with that sandpaper
and then wiped it down.
I ended up putting three total coats of paint on this.
So this one is the second coat.
And again, look who is over there on the right-hand side,
my sweet Lexi.
And so I ran into a little problem.
I was a little concerned about this
when I first started doing this piece.
I was worried that there might be a little bleed through.
And after that second coat,
I noticed that there was some bleed through,
just in a few places.
So this is shellac and I'm just putting on a coat.
I didn't put it on all of it.
I noticed some bleed through on the drawers.
So that's what I'm doing outside.
There was just a couple of places
on the actual sideboard itself.
And I did hit it with that shellac as well.
And here I am putting on the third and final coat.
Okay, so here we are to the fun.
I decided that I really wanted to add some pretty
to this piece, so I am lining the drawers.
So I just measured them.
Here you can see my fabric,
just fabric that I had left over.
And I'm just getting it cut.
I always find that cutting fabric
takes me a really long time.
So I just took my time and I did edit a lot of it out,
just so you weren't bored.
But just got that all cut up exactly
to the size of the drawer.
It did have that factory edge on it.
So that's what I'm doing here,
is just cutting off that edge that didn't look so great.
Now you don't have to worry about ironing this.
As you can see, it's pretty wrinkly,
but you will never notice that
once you get it into the drawer.
So no worries about that.
And I'm just using a rotary cutter to cut it.
Okay, so here I'm just dry fitting it.
I just wanna make sure that it's gonna fit in there
how I want it to.
I'm using Modge Podge, and this is a matte finish.
I'm just gonna pour it right into the drawer
and then spread it all out.
What I should probably mention is that
these drawers did have some fabric in them,
which was pretty typical from the hutches of that timeframe.
And it came out pretty easy.
You'll see in a little bit, I had in the other drawer,
it had a lot of fuzzies left on it,
but I'm gonna show you what I did in that drawer
and see how that one turns out as well.
So just getting that Modge Podge everywhere.
And here we go.
The great thing about this is that
it's really easy to adjust the fabric.
If it's not perfectly where you want it to be,
just pick it up, move it a little bit.
With the Modge Podge being wet, it makes it really easy.
And you just move your hand over it
and it gets all of those air bubbles out.
It really flattens out beautifully.
Look at how pretty.
Oh, I love it.
Okay, now this is the drawer I was telling you about.
You can see how it's pretty dark in the bottom.
And you can see that this is a drawer that, I don't know,
had some kind of special dividers in it.
The dividers I don't have.
And I decided I didn't wanna take out those pieces
that held the dividers in place.
So I just left them in there and I painted.
And it's pretty rough on the bottom there.
So I had to put in a little bit more Modge Podge
in this particular drawer than the other one,
just because it absorbed it a little bit.
But I just did the same thing.
Basically getting it all covered in Modge Podge.
And then I'm gonna show you how I was able
to get the fabric in there with those extra wood pieces
up along the edge.
Okay, again, just working on that edge
that's closest to me.
Trying to get it lined up and in place.
And then here I am literally taking the fabric
and just tucking it underneath those wood pieces.
And I'm just gonna do the same thing on this other edge.
Just tucking it right underneath there.
You can see how pretty that looks
with the sides painted white.
It just really looks clean and crisp.
And then adding in that fabric as a drawer liner,
it just gives it so much pretty, so much wow.
And then I'm putting on the hardware.
This hardware I bought at Hobby Lobby.
They do have it 50% off, I believe it's every other week.
Sometimes you really kind of have to push through there
when you've painted it.
On some of those, I actually had to put the hardware
through on the backside as well,
just to kind of get it broken through.
Now, I didn't even have to paint these doorknobs
because they went with the white paint
of the side board so well.
But if it didn't, I would have painted them as well.
And look at that.
This is the finished product.
Ooh, it's so pretty.
I decided not to rough it up.
I just really wanted a very clean, crisp look
to go with my dining room.
And here you go.
Look at how pretty.
Ooh.
If you guys would do me a huge favor,
if you would subscribe, comment, like this video,
it just encourages me to put together more content.
I really enjoy doing this.
And I hope that you've become inspired by watching this.
Thanks so much.
