How to Paint Door Knobs | DIY Paint Door Knobs | Brushed Nickel Update

Dawn Renee's Designs
8 followers
1 Video View·Oct 29, 2022
Hi guys, it's Dawn with Dawn Renee's Designs. Today I'm going to show you how I'm going to paint
my doorknobs and update them to brushed nickel. Right now they're currently oil rubbed bronze and
I have, I still love oil rubbed bronze, but I tend to be moving more towards brushed nickel
throughout my house. If you saw my bathroom renovation you'll see that that was all brushed
nickel. So I just painted a couple of doors and instead of just going out and buying new hardware
I'm just going to paint these and update them. So the first thing we need to do
is take them off from the doors. So let's do that. I tried to get a close-up angle here so you can
really see. This is the back side of the door and if you'll notice there is a screw right here
and then underneath the doorknob is the second screw. So all you have to do is unscrew both of
those and then when you pull both sides of the knob apart it'll come right off from the door.
Alright so I'm outside right now. I did do a little bit of prep work so let me go over that
with you. So the first thing that I did was I cleaned the hardware and what I used because I
had it was this TSP. If you don't have TSP that's okay. Just use like detergent like Dawn detergent
something like that. You basically want a degreaser. You want to get any oils, any stickiness,
anything like that off from your doorknobs because you want to start with a clean surface.
And the other thing that I did was I covered all the mechanism on the back side because you don't
want to get paint on that. The other thing I am going to do is I'm going to take this plate that
I have from my son's birthday party and I am going to put the screws in that. So I'm just going to
Sorry if you hear my dogs and my cat in the background. They're enjoying being outside today
too. So basically I just put a hole in this plate with a screwdriver and then I put the screw in
here and it's just going to make it so much easier just to paint those really easily. So let me go
ahead and get those. Okay I have two doorknobs so I have four screws and as you can see I have them
on the plate and it's just going to make it really easy to paint those. So let me show you
the paint that I'm going to use. I picked up this Rust-Oleum. It's flat antique nickel. They didn't
have brush nickel but this is pretty close. If you look at the top it's pretty close to
the look that I'm going for and this does say that it is a paint and primer in one.
However I've done a lot of painting in my life, walls, furniture. I am also a professional screen
printer and I know that you get the best color when you start with a white base. So for that
reason even though that says it's a primer I am going to start with this Rust-Oleum primer. I'm
just going to put one coat of primer on it that way I think that it's going to give me just the
best overall finished product. So the other thing that I'm doing is I have this is actually
it's not from paper towels it's from shop towels and I just cut it in half and so basically I can
just fit that right into here and it's going to make it so much easier to be able to paint these.
So let's get started and get the primer on. Okay so according to the can we need to let that sit
and dry for an hour and then we can come back and recoat. Okay so it's been an hour since I put the
primer on and as you can see it looks pretty good. It's dry to the touch so time to add the color.
Okay we have them painted so let's go ahead and put them back on the door.
So I'm just going to put this one side through and then you just have to thread this side through
and since this paint is still fairly fresh, I mean I just finished painting it a little over
an hour ago, you want to try to put in the screws by hand as much as possible.
Okay and now I don't know where that mark came from but I'll just touch up the paint. Oh I think
I have paint on my hand, no wonder. Okay so when it comes time to screw it down with a screwdriver
you just want to make sure that you're not rubbing it up against the doorknob if at all possible
because again it still needs time to cure. So just take your time in putting it back together.
Okay so I got this spot right here on my freshly painted door. So what I did is I just got a paper
towel and I wetted it and I'm going to try putting some of this Dawn Power Wash on it
and see if that will take it off. And it took it all off. There you go. I hope that you found this
video to be helpful. This took just a few hours and you're able to get a fresh new look. If you
would please like, subscribe, and comment. It just helps my page grow and I'll see you next time. Bye.
