What is up YouTube! It's your boy jjaybeardedbarber back with another barber tutorial! This one is how to simply do a skin low taper fade with a higher taper in the back! We also do some beard trim with some tomb45 enhancement to make the beard pop more and add some depth to it to get it extra CRISPY! Also, we bring back his line up and I demonstrate how I attacked that!
ALSO, Stay tuned my website is almost finished and I will be selling my jjaybeardedbarber RAZORS and MERCH soon!
Make sure to like, comment, and subscribe! I appreciate all the support! Remember at 1,000 subscribers I will be doing a PS4 giveaway to a lucky winner! Stay tuned.... Follow me on instagram: jjay_beardedbarber Beat by: Tnersy- follow him on instagram for dope videos and beats!
BarberNova gave me a code for all my subscribers to use. "jjay10" to get 10% your entire order! Check out the Red Almight Shears from Barbernova.com
What's up, YouTube?
We're back with another barber tutorial.
I'm mainly gonna be going over
on how I simply do a low taper, a high taper in the back,
and then, you know, a nice crispy line up
with some beard work, all right?
So let's get into it.
Like I always say, we start off with combing the hair out
to make sure everything's nicely even,
and then we're gonna go ahead and take our number two guard.
I am using my Gamma Clippers right here.
These are unreleased yet,
and I'm using that to go ahead and take down the bolt
just to get everything nice and even
just so I know what I'm blending into.
Usually, I always start off with a number two guard
or a number three guard, depending on the hair texture
and how, you know, coarse or thin their hair is.
Number two is really good for more coarse hair
because it doesn't go too short
and it keeps that still, it keeps that darkness.
But if, you know, you got someone with more finer hair,
thinner hair, you would wanna maybe start
with a three or four guard just to see
how the hair is gonna react and how short
it's really gonna go with that number.
After that, we're gonna go ahead and start
putting the bald guy line in.
So I'm starting on this side,
starting right where the ear connects,
and I'm just gonna go ahead and make that bald guy line.
Then we're gonna go over to the back,
and he wanted it a little bit higher on the back taper,
so we're gonna go pretty much where his earlobes are,
at the bottom of his earlobe,
and that's where our bald guy line's gonna be at.
And then we're just gonna follow that through,
bald him out, get it all nice and ready,
make sure you're clean, make sure you're consistent.
And like I say about being consistent,
I'm checking the other side just to make sure
that they're gonna be even on both sides,
because sometimes, believe it or not,
some earlobes are not evenly on both sides,
so you could use a reference point, which does work,
but it's also very smart just to go back
and double check and look for yourself, right?
Now we're going ahead and balding him out.
I'm using my Gamma shavers as well,
just to make sure I put a good bald guy line in there.
Also, right here, I'm gonna show you guys
is that I make it nice and bald in the middle,
but as I get more closer to the bald line,
I'm either raking, going down,
or I'm tapping and skidding sideways
just to blend out that line.
We're doing a low taper.
I wanna go ahead and keep as much darkness around the hooks,
so I'm starting with my zero guard closed,
and I'm making the guy line about a half inch to an inch,
and then I'm gonna go slowly open the lever,
make another, fade that up a little bit,
and then completely open the lever
and flick out and into that number two guard.
And this is keeping and preserving
that darkness around the hook,
because mainly when it comes to a low taper,
you wanna see as much of the hook as possible,
depending on each client, how they want it,
but this is how I personally do my own tapers.
So what you do to one side, you do to the other side.
So I'm gonna be flipping back and forth,
showing you guys and explain to you guys
what I'm doing on one side,
and the other side, you'll get to see it again,
and just follow the steps
and try being as consistent as you can.
Next is gonna be the one guard, and same steps.
We're gonna start with closed,
slowly work our way up to the lever open, all right?
So we're opening the lever three times,
which is completely closed, halfway, and then all the way open.
All right, and we're staying tight,
we're staying to the same curvature
that we started with the zero guard,
and we're just slowly trying to blend that,
give that illusion of it being kind of like a burst taper,
by keeping the darkness on around the hooks.
I also apologize, my camera was out of focus
on this side for some reason,
so when it goes to the other side,
it's a lot more clear and you...
So since we started with the number two guard
to kind of clear off the canvas,
that one guard was our last guard,
so now we're moving back to the blade completely open,
and we're gonna slowly now blend down,
and just picking dark spots,
picking out areas that shouldn't be there,
and slowly working our way down with the lever,
so we're gonna go completely open, halfway,
and then completely closed.
And when you get completely closed,
don't be afraid to push up that line,
because the only way you're gonna actually
get that blurry taper, blurry fade,
is actually getting rid of that ball guide line,
and you have to be able to push up.
Now we're doing some minor detailing with our trimmers,
because that's what's gonna really take out the shaver,
and to where the clipper is closed, right?
And since we're here,
we're gonna go ahead and start edging them up,
just so we could really see how the taper's looking.
Sometimes, I mean, I already know how this client,
how his hair texture is, and how his hair reacts.
Sometimes it's a good little tip
to go ahead and put the C-cup in first,
and then do your taper,
so you could really hone in,
and really pick out what you need,
and to keep that edge as dark as possible.
So here we're just gonna do some detail work
with the scissors.
These are my Barber Nova shears,
if you're curious, they're the Red Almighty shears.
I'll have a link down below for them.
Right here, I'm just in front of him,
and I'm looking at both C-cups
to make sure that they're both symmetrical,
and where I need to put this one in
to make it symmetrical as the other one.
So now we're moving on to his beard.
His beard was already pretty short,
so I took a number one guard and went with the grain.
After that, I went ahead and flipped it over,
opened the blade up, and went one against the grain
from the bottom of his earlobe up.
I'm gonna do the same on the other side.
Now we're gonna go ahead and go with the zero guard,
completely open, and work our way down to closed as well.
After that, we're gonna go ahead and do no guard,
and completely open, and work our way down to closed.
All right, and each time we're closing the lever,
we're moving up about a quarter of an inch.
Now we're going ahead and putting his vertical bars in,
just tapping the line barely,
keeping it as sharp as we can,
but not pushing him back at all.
And I'm gonna go ahead, and after this,
I'm gonna go ahead and hit the back
of his beard line as well.
All right, we wanna keep it as natural as we can,
keep it as full as we can,
but we're gonna have it as sharp as we can as well.
Don't be afraid to move the client's neck as well
to make the job a little bit easier for yourself.
Right here is a great example.
So I go over the back line one time,
and you can see it's not too crispy.
It's not that great,
but you go ahead and ball them out, get it kind of there.
That's the rough draft.
And now you go ahead and reline it again,
and look how much crispier
and how much sharper the line just got.
So you gotta make sure you go over a couple times
to get as crispy and as sharp as you can.
Now move on to the back taper, same steps.
We're starting with the zero guard closed,
making about an inch guideline,
maybe even an inch and a half guideline on the back,
because he really wanted a high taper, really blown out.
So we're gonna start with that,
and then we're gonna slowly open up the lever,
and then go up a little bit more,
and then completely open the lever,
and kind of flick out into the two guard.
Right here, I'm just taking my clipper over combing,
just kind of blending into
what that two guard didn't blend into.
Now we're starting with the blade completely open.
And as you can tell,
I'm kind of flicking out into that zero guard,
so I don't make a harsh guideline
or don't create any new lines.
So at first I'm kind of flicking out into it,
and then slowly I'm gonna start
kind of really fading into it, keeping it more flush.
And then we're gonna go ahead
and close the lever down a little bit,
and just keep lever playing and moving around,
so we can completely get that line out.
Ooh, there we go.
Now the taper's finally coming together.
Now look at that, looking real blurry,
has that good contrast,
good transition from light to dark.
After this, we're gonna go ahead and hit it with the shaver,
just to really add another transition in there.
And the neckline in, not pushing them in,
we wanna keep it as crispy as we can, like I say,
but not pushing them in, all right?
And it's gonna take multiple reps.
You can't sit there and do one time, expect to be sharp.
So go ahead, this is just a rough draft.
Go ahead, edging everything in,
comb it through, and reline again.
The facial hair, and go ahead and line up the lip area,
lining up right above the lip.
Gonna follow on the other side, keep it nice and clean,
combing the hairs either direction that we need
to make sure that there's no excess or nothing hanging over.
Right here, I just took my one guard open again
and just saw some uneven area.
So just going over real quick, knocking it down
so that when I come back with my trimmer,
I can get a nice crisp line, all right?
So the back line, I'm following it closest to his jawbone,
and I'm kind of dropping it
as I get closer to his Adam's apple.
And that gives the illusion
when he's looking straight at him
that he has a nice sharp jawline,
but it keeps that density and that fullness
in the front area.
Right here, I'm just catching any fly hairs,
anything hanging over.
All right, now moving to the hairline,
how to fix his hairline, how to get it sharp.
So I'm starting with his more dominant side first,
getting that down.
And I started from the left side,
moving that over to the right, to the middle,
and getting that nice and crispy.
As you can tell right now, looking pretty crispy,
didn't even put any razor to it.
And I'm gonna follow it to the other side
and match that side as much as I can to the left side.
All right, so I started with his dominant side,
brought that to the middle.
Now I'm going to his more weaker side
that was a little bit more patchy.
And I'm gonna try to get it as crispy as I can,
combing the hairs forward,
combing them in every direction,
and making sure I get it nice and crispy.
Now I went ahead and brought him back,
put some shave serum on his forehead, on his beard,
because now we're gonna get to the razor work, all right?
Pretty self-explanatory.
Make sure to stretch the skin,
hold the blade at about a 45 degree angle,
and go to work.
So tension and stretching the skin is very important.
So as you can tell here,
I'm using my thumb and my two fingers
to stretch the skin out,
and then use my razor angled on his forehead
and pulling straight to that line
that I created with my trimmer.
Now when it comes to low tapers,
edge ups are very important.
That's what's gonna make everything stand out the most.
So I'm starting with his C cup area,
making that nice and crisp,
making that nice and round,
having a good shape to that.
And I'm gonna lead with that shape into his beard.
So see how I connected the C cup to the beard
and that's what's gonna be technically my guideline
to follow throughout his beard.
Same way how you use a traveling guideline
when you're cutting hair,
you pull the hair on the top,
cut that hair,
and then that's gonna be your traveling guideline
to the back.
Same thing with the beard.
So I traveled it from the C cup into his beard,
and that's the first pass.
That's pretty crispy, that's pretty sharp.
But like I said, we're gonna go ahead and comb through that
and then make sure to get really detailed
and get that beard as crispy as we can,
as sharp as we can,
so that when he goes home and washes, take a shower,
everything's gonna look crispy and intact.
Four points that I'm pointing out
that you wanna make sure is cohesive and all symmetrical.
So make sure all these points are connected together.
That's how you're gonna get that perfect round shape
in the beard and the C cup.
Also, this is some extra details
that your clients will appreciate
and that makes you stand out compared to other barbers,
is when they're lying back like this real quick,
go ahead and just take that razor,
go against the edge up that you just made on the neckline,
just so it lasts, you know, extra day or two,
and clients really appreciate that.
So here I'm combing out the hair
into the direction of the line that I made,
and I'm taking my scissors and just cutting all that off,
just so that, you know, whenever he's moving his hair,
nothing gets out of shape.
Now I'm taking aftershave and I'm cleaning off his skin.
He's talking about how it is burning him,
but hey, you gotta do what you gotta do.
So the reason I'm doing this is clean off the skin,
make sure that it's all nice and dry.
I'm gonna go ahead and take the blow dryer
and dry off his skin so that no oils are on his skin,
so that when I put the enhancement on,
it'll last, you know, up to two to four days,
depending on how they wash it.
So now here I'm using my 245 dye,
and I have the shape where I want it,
and I'm just following through with it,
tapping the trigger, putting layer by layer,
because, you know, less is more.
So you wanna go ahead and put layer by layer,
and put in areas that you may need
and some areas that you don't need.
So go ahead and just spraying it,
checking, pulling off, checking.
So I'm gonna go ahead and hit the back line as well,
putting a little bit line, just lightly, and boom.
See, I didn't put too much,
but you can already tell it makes a difference.
It just makes everything pop that much more
and takes your haircuts to the next level.
But before I even put the enhancement in there,
you could tell line up is looking crispy,
you know, beard looks good,
but this just takes that cut to the next level.
This is a little tip that I do,
I take two cards and put them on top of each other,
just so I don't get any dye anywhere else.
Make sure after you put the dye in there
that you go ahead one more time with the razor.
These are details, this is what your clients appreciate
and what makes your haircut stand out.
Just get everything nice and crispy.
And man, my dude's looking good.
He came in a little rough,
but now he's feeling himself, he's good,
and he's ready for the week.
Confidence is at an all-time high.
You know, he's ready to go out, he's ready to do his thing.
So that's what haircuts do, man.
You know, you come in not feeling yourself,
you get a nice haircut and everything changes.
Your whole mood changes.
That's what I love about haircuts.
Quick details with the scissors.
And that's pretty much gonna wrap up the cut, guys.
Lastly, I'm just gonna go ahead
and put some water in his hair, put some gel in there.
We're gonna grow out his hair a little bit
so he starts getting his curls in
because he used to do a comb-over,
but I told him to grow it out,
get some curls going, curls for the girls.
So that's what we're doing right now.
But I think the cut came out dope,
nice low taper, crispy lineup, crispy beard,
nice high taper in the back.
My dude came in rough.
You're gonna see right now in a little bit.
Came in a little rough, but I'm happy with the result.
Made sure to bring him back to life.
I also put the talc on there
just to make that haircut pop.
Well, this is how he came in before.
Rough, hurting, and ooh, my dude's back in the game.
Got the little curls on top, low taper, beard looking good.
Make sure to subscribe, like, YouTube.
If you guys do enjoy the content, I appreciate you.
I'll catch you guys on the next one.