Modern Accent Wall Nursery Remodel Time Lapse

ZEM Construction
5 followers
6 Video Views·Nov 3, 2022
Modern Accent Wall Nursery Remodel Time Lapse
Hey guys, Zach here with Zem Construction bringing you a little bit different video this time around.
In this video I'm going to show you some of the things that I did to update this bedroom here.
Our two-year-old has just moved out of this room into the bigger one down the hall
and now we are getting this one ready to go for a new baby that's coming here pretty soon.
So the main thing that I'm going to be doing in this room is this accent wall right behind me.
What I've already done at this point is filled and patched all the holes and inconsistencies
as well as sprayed on a texture on the walls and the ceiling.
So without any further ado let's get to the video.
Okay so first step in building out this accent wall is to add up the panels.
There was previously a texture on this wall as well as the wood plank the pallet wall
that was up there so I wanted to make sure I could hide those to have a nice smooth surface.
The paneling that I ended up using was not a tempered hardboard which is what I would
traditionally use but for some reason I'm assuming because of COVID there was a shortage
in where I'm from so I could not get my hands on any.
I ended up going with a cheaper option actually and it was a just a wall paneling from Home Depot
and what was great about this stuff is both sides are exactly the same so because I had a lot of
angles some of my off cuts would not have been able to be used if I used tempered hardboard
because like you know the back has a texture to it so this stuff was the same on both sides
besides the pattern so I went with using that.
It was a little bit cheaper and I had some difficulty with it but I will talk about that later.
So with my design it was all based off of that first triangle on the top.
The rest of the angles on the entire wall are all based off that shape there.
I just kind of picked a random angle, cut it with the track saw,
put it up and then used measurements to fill in the rest of the panels.
I had a rough idea of the design that I was going for so once I was able to kind of map it out
it all went relatively quickly.
The entire shape of the wall is all just triangles and rectangles and squares so very simple.
I used a paneling adhesive, a construction adhesive,
as well as an 18 gauge cordless DeWalt brad nailer to hang this all up.
Several different things could be used, you could use nails,
different gauges would work fine.
Also a narrow crown stapler would also work really well.
My only worry is if for some reason I did use a fastener in a spot
that I wasn't going to cover up, let's say I misfired or something,
a staple would be significantly more difficult to cover up
whereas an 18 gauge brad nailer is just a small little pinhole
so if I did need to patch and sand over that it would be significantly more simple.
Worked my way around the window with the paneling.
Tried to get as tight as I could around the window
because I'm going to be building up trim around there
and so I wanted it to be as smooth as possible.
Hey guys, just wrapped up putting all of the panels on the wall.
It looks really good.
You can see there are some water spots on some of them.
Actually as I was filming the intro it started pouring down rain
so I tried to get most of them out of the rain but obviously I didn't get them all out.
So the fibers are feeling like they're raising up a little bit
so what I think I'm going to do is throw on a bunch of primer.
Hopefully because of how absorbent this stuff is
the primer will soak in really well, harden up those fibers
and then I can sand it, possibly recoat if I need to.
So let's get on to that.
Here are some shots of the paneling after it's all done.
All of those seams are planning on covering up.
I think it turned out great.
Everything is flat with one another.
Now I am rolling on a primer.
I just used the 1-2-3 all-purpose primer.
A shellac base, oil base, any primer would most likely work.
This is just what I had on hand so that is what I went with.
All right, got all of the primer on the wall.
After the first coat I was able to sand off some of those raised fibers that got wet.
It worked exactly like I wanted it to.
Everything is nice and smooth now.
The next step is to get all of the trim up on the walls.
Okay, so now I'm with trim.
I'm going around the entire perimeter.
So I did the sides, the top, and the bottom first.
I felt that it would be easier to butt up against those
as opposed to coming back later and then trying to fill those in around the perimeter.
I'm sure that this wall was not perfectly square
so in order to mitigate any difficulty down the road
I felt it would have been easier to do the perimeter first.
I did a thicker piece along the base.
I'm going to have a baseboard around there
so I wanted the reveal to be the inch and a half
which is the same as all of the smaller pieces.
I did use a thicker width trim board around the window
to kind of give the window its own accent.
A little bit more definitive around that area.
Also, it matches the rest of the trim in the rest of the house.
Again, I'm using a 18 gauge brad nailer
as well as some construction adhesive to get all of these trim boards up.
So this large piece coming down the middle is very crucial.
The rest of the design actually builds upon this
whether it's coming off at a specific angle
or 90 degrees from this one piece
so I made sure to take some extra time
make sure that was straight, fit well,
all the angles and joints were perfectly straight
because like I mentioned
it was either coming off of this or parallel to it
for every single piece the rest of the way.
So once that one was up
and some of the other crucial main pieces
this design seemed to go significantly quicker.
This is another one.
This one is coming off perfectly 90 from that main first piece.
So like I mentioned there's the parallel piece down below
the perpendicular piece going up top
and just filling in the rest of those.
Now of course what I wanted to make sure I did
was fill and cover all of the seams between the paneling
so that was kind of the first priority
get those filled in and then build the design off of that.
So over on the right side
all of the pieces are going to be horizontal
and parallel with one another.
I felt that this was a great way to allow the window to stand out
because there's not some distracting angles
running through it and around it.
Every piece running through it or going over it above it
is parallel with the top and bottom piece of the trim.
So I felt that was great.
The design actually has three or four main sections actually.
The top triangle piece I'm filling in right now
the horizontal pieces on the right
the main strip down the middle
which I ended up calling the ladder
and then just a couple accent pieces down below
which end up being covered by the crib.
Anyways I did want to fill those in which I do later.
So the two miters up at the top in the triangle
those are the only two 45 degree miters
which create a 90 degree on this entire wall.
Every single other angle is one of the two complementary angles
or just a 90 degree butt joint coming off of that.
Hey guys I just wanted to get in here real quick.
I know I'm going to get a lot of questions about the process
and the steps on exactly how I put up the trim.
So at the end of this video I'm going to have some tips
and tricks that I learned in putting this up
that really really helped me.
So if that's something you're interested in
make sure you stay tuned to the end of the video.
Now at this point I'm just going through
filling in any of the blank spaces
trying to keep the ratios the same
keep the design appealing.
They're all just small cut pieces.
Like I mentioned I do have some tricks that I use
in order to find the perfect angles.
Make sure that all of the pieces fit really well
had good joints.
Finishing up over on the right
getting just some of those small accent pieces
and then the pieces down behind the crib.
So here is what the wall looked like
after everything had been hung up.
So no nail holes are filled yet
no caulking so this is just the trim.
I think at this point it looked great.
I really liked the design.
My wife was a big fan which is also really important.
So the next step for me was to go through
and fill in all of the joints
and all of the nail holes
make everything nice flat and smooth.
I did use a little bit of a cheaper
pre-primed MDF product
so that does involve a little bit more prep work
than if I were to use like a nice primed pine
or a different type of hardwood.
So going through filling all of those
I use the pink dry indicator.
I think it works great.
Also for something like this
where there are tons of joints and nail holes to fill
with it being pink I can see if I hit that spot.
It's very obvious if I did miss anything.
So for me it's a product of choice.
There were a lot of nail holes and gaps to fill.
I was very conscious when I was hanging all of the pieces
that every time I shot a nail
I was the one who's going to have to go back
and fill those in.
So after those were all filled in
I went back and sanded all of those smooth.
Also it was a time where I could sand off
any other imperfections or blemishes
that were in the piece.
Also do not be like me
and forget to wear your respirator
and or open a window.
There was a lot of dust in here
and it built up very quickly.
I was assuming oh it's not that much surface area to sand
I should be fine.
I also had the little filter hose on the end of the sander.
That obviously did not suffice.
So like I mentioned don't be like me.
You can see just opening the window
made a significant difference.
So after all the sanding
there was some MDF that was actually exposed
so I just took an all-purpose primer and a spray can
went over all of those pieces
just to make sure they were primed
and had good adhesion.
It actually worked out really well.
After it dried I was able to go back
with some 220 and lightly sand.
So at that point I did a quick sealing coat.
Felt like that would have been a good time.
So now after that I went through
and caulked all of the joints and the seams
between the panels and the trim pieces.
I didn't want any gaps to be shown.
This did take a little while.
Every single shape needed to be filled
around all the sides.
All of the little squares around the window
needed to be filled.
I think I ended up going through
almost two full bottles of caulk for that
and I was very sparing
and tried to be as much as possible
but there was a lot of seams and gaps to fill.
I'm really glad I did it.
I think it turned out perfect.
I also went through around the perimeter
and filled in the lines between the wall
and the trim pieces as well
to give like a nice clean sharp point
for the paint to go on
because this accent wall
as well as the main textured walls
are going to be a different color.
So I wanted to make sure that I had a nice clean line
for that separation of color.
I was really fortunate that I was able
to use the window boxes.
They were actually made out of a,
I'm guessing a pine or some type of common board
and they were in great shape.
No water damage, nothing like that.
So I just kept those in place
and was able to trim around them.
A little bit of caulk and clean up
but way easier than building a whole new window box.
Hey guys, got everything wrapped up
with the trim on this wall.
Sanded, caulked and everything.
I think it looks really good.
I'm really, really happy with it.
So the next step here is paint.
I've already painted the ceiling a flat white.
The walls are getting a Sherwin-Williams agreeable gray
and this wall is getting a Sherwin-Williams retreat.
So let's get on to some paint.
Okay, so now on to paint.
So traditionally in my larger scale remodels,
I actually use a painting subcontractor.
However, because this was one, it was my own house
and it was also a really small room.
I felt like I could handle it.
I am out of practice a little bit
because I have found a really good sub that I use.
So there's a little bit of a learning curve
but I did end up figuring it out.
This accent wall, I did splurge a little bit
and buy the really nice quality paint.
I used the bare marquee in this instance.
Oftentimes I don't need to purchase a paint that nice
because actually my subcontractor does two coats
on all of the walls.
And so buying a higher quality paint
is almost pointless in that case
because he's gonna go back and do a second coat anyways.
So buying a paint designed for a single coat
is just a waste of money at that point.
So with this accent wall,
I knew there was going to be
a lot of imperfections potentially.
And so getting a nicer, higher quality paint
that has good coverage was really important to me
because I wanted to make sure
that this accent wall did look really nice.
So going through with a paintbrush,
essentially cutting in all of the joints
where I felt like the small foam roller
wasn't going to reach.
Again, kind of like with the caulk,
there was just a lot of little squares and spaces to fill.
Now with the foam roller,
it does leave a little bit of a texture
and I was okay with that.
But as long, I just wanted the texture to be consistent.
So I went over every single panel
on the tops of all of the trim pieces with this foam,
make sure it's nice and cohesive, have good coverage.
Another benefit of splurging a little bit
and buying the higher quality paint
is that it really only needed one coat.
I did go back and do some touch-ups
and some thin spots, whatever that I had missed,
but it did not need a full coverage coat.
My wife picked all the colors in this room
and I am a huge fan.
I think it turned out really, really nice.
All right, guys, the time has come.
Let's check out the final result.
Off camera, we were able to bring in
the furniture and decor.
I think this design turned out awesome.
The overall goal with it was to make it as relaxing
and as inviting as possible.
Sometimes newborn baby can be a little bit stressful.
So anything we could do to make that relaxing and tranquil,
that's what we wanted to do.
So I just wanted to say thank you so much
for taking the time to watch this video.
I know this one was a little bit different
than what I normally post,
a little bit smaller scale, a little bit more in depth.
So I really appreciate your feedback
and what you guys think.
If you like this video
and you feel like you learned something,
I would really appreciate it, hit that like button.
Also, if you like this type of content,
construction, remodel type stuff,
I have lots of other videos you can check out,
as well as if you hit that subscribe button
and the notification bell,
you'll be notified when I do post.
I try to post as often as I can.
Of course, remodels do take a little while,
so I'm limited to that factor.
But again, thank you so much for all your support.
Thanks so much for watching.
I'll see you next time.
I have a little bit of bonus content here
showing you some of the steps that I took
to simplify hanging all this trim.
So the first thing I would need to say
is simplify your angles, okay?
Make a design that is simple
and utilizes the same angles.
So how I did that is I started off
with this big triangle up here
and it created a complementary set of angles, right?
So since this is a perfect 90,
these two angles that it created are complementary,
meaning that when they're combined together,
they create 90 degrees.
So using math, using the Pythagorean theorem,
I'm not going to tell you what my angles are
because every room is going to be a little bit different.
But once you figure out what those two angles are,
write them down somewhere,
know what they are so that you can take your miter saw
and set them to those points every single time.
Once I found those two angles,
I actually created these two reference blocks.
As you can see, when I put them together,
they do create 90 degrees.
So they're complementary.
The great thing about these blocks
is they have a known distance on them on the long side.
So if you actually look, these are the same.
In my case, I use four inches.
So I know that no matter what,
this distance is always four inches.
In this design, the only angles on this entire wall,
besides these two 45 degree miters
with every single other one,
is either one of these two angles,
this more deep one or the shallow one,
or a 90 degree butt joint.
So when I was setting up and measuring
all of these different pieces,
I was able to use one of these
and they go both directions.
So for example,
if I needed to figure out the distance between this,
I'm not having to measure between here
and then some arbitrary point on this line.
Actually, I could take my block,
put it exactly where I want it to go,
make a mark,
measure this distance between my mark
and where it needs to go,
add four inches,
and now that piece is perfect.
This comes in handy when you're trying to cover up a seam.
So for example, this piece had a seam
between the two panels.
I was able to take this block,
set it up, mark it,
add four inches to whatever that distance was,
and that piece would fit over that seam perfectly
over nail holes or anything else
that you're trying to hide.
If you look at these blocks,
even on this one,
all of these are a little bit more complicated,
but they're all parallel perfectly.
If you take this,
set it up,
and now that it changes angles,
you can use this one
and do the same thing.
So I hope that makes sense.
If you guys have any questions,
please let me know.
Thanks again so much for watching.
