Making Six Huge Frames For Titian's Mythological Paintings

How Do You Do It?
70 followers
7 Video Views·Dec 3, 2022
To me, I can't really see what they look like.
I have a very indistinct idea.
I'm really relying on Amanda to get it right in the end,
to make them look like I wanted them to look.
When they're all done, maybe we'll be able to see some of it.
When they're all done and they work, they'll just look right
and there'll be nothing much to say.
They'll just look like real frames.
But it's a real mystery how well it can work and how it works.
Welcome. This is the National Gallery's framing department.
I'm Peter Sharder, the head of framing.
This is the store of the framing department,
with lots of frames that we keep.
But at the moment, we're making enormous frames for the Titian exhibition.
Come along, I'll show you.
This is the machine shop of the framing workshop,
and we're making frames for the Titian series,
really large Italian 16th-century frames, replica frames,
out of Italian poplar, or Lombard poplar,
which is actually quite difficult to buy, so we buy a whole tree,
which then gets cut for us to the right thicknesses,
and comes in these enormous boards,
which we then cut to the right size.
Planing it by hand makes it possible to shape it as you go along,
rather than making it by machine,
where you just have one continuous,
exactly the same profile all the way along.
The shape of the way the borders age,
we keep all that irregularity all the way down into the mouldings,
which will make it look more real in the end.
Once the mouldings have been run into a pattern,
then we start tracing the pattern of carving, before carving.
The whole carving for the frame takes just about three weeks.
There are six frames, so it's been a few months.
But this is the last frame we're doing,
we're just literally starting on the last frame.
I'm actually going to use screws.
That's the only really 21st-century cheating,
because we've got very good screws now,
and they work really well,
and it's the strongest way of securing them.
Italians in the 16th century would have used
a whole bucket full of nails to assemble this kind of frame.
I'm just trying to position it so that it's even all the way around,
which takes a bit of time, starting off so randomly.
Oh, that's perfect.
That's ridiculous, that's perfect.
This is the last side of the last frame to be glued on,
and then the entire assembly is finished.
All the woodwork is finished.
That's the last side of all these,
I think I calculated nearly 50 metres of carved moulding that we did.
I'm putting on layers of rabbit-skin glue
with Italian gesso, so it's gesso de Bologna.
Once I've got this first coat on, it gets easier,
once I've got into the depths.
You build it up so it's a nice soft surface,
and then you put the clay on afterwards and the gold,
so you can get a really nice high shine with the gold when you burnish.
I'm putting on the clay, or the bowl,
which is sort of a red and a black, a red-blacky colour,
and I'm putting it on very carefully on top of the yellow clay,
the yellow clay which you put on first and you go into the depths,
so that when you're gilding,
you can disguise the areas you missed slightly in the bottoms.
And then I'm very carefully putting the darker colour just on the tops.
This is the application of the gold.
We're using 23.5 carat gold, so fairly pure gold.
It's actually so thin that you can see light through it,
and that's why the colour of the bowl is really important,
because that influences the hue of the gold,
it can make it darker or warmer or cooler.
If you touch the gold leaf, it just sticks to your fingers,
it just disappears immediately, it goes to nothing.
So it's a very elusive substance.
And this looks very easy the way Cesare does it,
but it takes years to do it with as much confidence.
I hate it. For me it always flies around,
and you forever chase little bits of gold leaf that fly around the air.
But that's a whole leaf of gold put on in one go.
That looks super easy, and it's almost impossible to do.
All the burnishing is done with an agate stone these days.
Originally, animal teeth were also used for burnishing.
You can apply pressure onto the gilded surface,
and it makes the gold look like molten gold, really solid and shiny.
Through the burnishing, it becomes very hard-wearing.
Before it's burnished, it's quite easily abraded.
But after burnishing, it's really solid.
This is the final stage of the making of the frames,
where the surface is made to look like an original 16th century surface.
So we've got this frame here,
which by chance we have a frame that is being restored,
but part of it has got fantastic original gilding.
It doesn't have to match this exactly,
but it gives an indication of what a real frame of the time would look like.
It's really crucial that this part is right,
because that is what is right next to the painted surface.
Even when you don't look at the frames,
that's what your field of vision will be influenced by.
The trouble is, if these frames are too bright and garish,
you're not going to see the painting.
And it's all about the painting.
The life of the paintings, these are paintings about transformation.
They're paintings about the mutability of natural form,
of bodies changing shape.
And they have this energy, they have this energy of transformation
in the very execution, the very way they're painted,
the way Titian lets the colours blend into each other
and keeps contours open and so on.
And all of that is complemented by the frames
that have this pulse running through them because of this pattern
that suggests the flow of water or an undulating organic form.
We went to great lengths not just to make the same or similar frames,
but to make similar frames that can be followed back to designs
that Titian would have been familiar with.
And fully carved frames, which is, I think,
a first for any exhibition of this scale,
to make that many fully carved frames.
It's an extraordinary effort, just in terms of materials
and the amount of gold used and the hours spent in carving these frames.
It is a really monumental effort and I think probably
the National Gallery London is one of the few places in the world
where this kind of thing could have actually been made.
Wonderful paintings.
