Welcome to a new project. I am making a new set of early Edwardian undergarments. I have decided to make a new corset and a set of combinations, aiming to place them around 1899-1903. I particularly like this period as the 'pigeon breast' wasn't at its highest yet. My end goal is to make a half-mourning dress, inspired by this time period.
This pattern is based on an extant corset in Atelier Sylphe's collection. The original is made of one layer of fabric, with only one metal bone, which makes it quite lightweight. However, I flatlined my pale yellow cotton sateen with coutil. I really enjoyed working with this corset, I think the shape is absolutely phenomenal, even without tight lacing. I believe with some padding, it will absolutely give me the silhouette I am after.
Hello everyone, welcome to a new video. I have undertaken to make new early Edwardian
undergarments. I am quite fond of the early period, a transitional time between late Victorian and
Edwardian, usually around 1898 to 1904. I had already made an ensemble of this time period
but I was not happy with that corset. I'll link that blog post down below. Here are some of my
main inspirations. I decided to make a new corset and a pair of combinations. So when undertaking
to make a new corset, I really wanted to try an atelier sylph pattern as I had heard great
wonders. I hope I didn't mispronounce that. These are patterns taken from extant garments.
I purchased the ED8 pattern and I do not regret it at all. I made a mock-up of this which only
needed some minor alterations. So I just thought I'd mention real quick the changes I've made.
So this is my mock-up for the corset. It's a bit ugly, I know. I don't have any footage
on because it doesn't look very good at all. But the main thing is that it does the diamond
shape of the lacing at the back so that means it needs more space in the waist. You can see here
it's been pulled and the string is too much for it. So I decided to add some to the waistline
of the corset. I decided to add about an inch and a half which I then divided between three
different seams, three different pattern pieces which hopefully will work out. I'll just show you
what I did. This is one of the side back ones and what I did was, thankfully this pattern is actually
really good and it's got waist marked just there. So then from there I marked what I needed to add
which is just a tiny little bit. Then using my french curve I fixed that and then added the
accordion seam allowance that I've stolen by doing by doing the curve. And I did this on this pattern
piece, this pattern piece. So they're really tiny alterations but in the end they should give me
enough room. And there was another one that I can't find right now so this will have to do.
But yeah you can see the tiny little changes there. So that's the waistline, the waistline is there
and that's the tiny little bit I added, yeah. Airspun corsets are very complicated so I didn't
want to touch it too much. For fabrics I am using some leftover coutil I had and this lovely pale
yellow cotton sateen I bought out of its vintage shop. These were about three cuts of a meter to a
meter and a half and they cost me five pounds. I also had this lace featured here though I swapped
it out for a different lace in the end. Once I got the pattern sorted out I went ahead with
assembly. It was a bit tricky as I tried new methods with this. The pattern did come with
some instructions but I found it a bit tricky to decipher them. But once I got it it became very
clear. My first step was to cut the pattern pieces out of the coutil and the sateen. The coutil is
very hard to pin to so instead I traced around it and then cut. I was also careful with grain
lines as they are very important in corsetry. Once all the pieces were cut out I transferred
all the markings to the coutil layer using a heat vanishing pen which was pretty dumb as I had to
iron the seams before attaching the channels so all the markings disappeared anyway. The next step
was to flatline all the pieces together. I matched them up, pinned them and then basted them together.
Then I could treat each piece as a whole. I started by inserting the busk. I won't go into a lot of
detail in this as I just followed the method described in Sewcurvy's blog post. I'll link it down below.
It was the first tutorial I ever followed and I've been using this method ever since.
Basically you need two layers for each side of the busk so I had the flatline layer of coutil and
sateen and then an extra layer of coutil which will essentially act as a lining to encase the busk.
These two pieces are seamed together. On the tooth edge of the coutil you mark the teeth onto it so
you leave these gaps in the seam and then slide the busk into it. Then I pinned around it and
basted the busk into place. Then it was topstitch using a zipper foot. For the knobbly side I
butted it up to the seam and marked each of the little knobs then used an awl and some fray check
to make small holes. The busk half is slotted into place pushing each knob into place. It is then
basted in topstitch also. Once the busk was done it was time to move on to the gauze. Now in the past
I sewed gauze in the usual manner of seaming them right sides together and doing some tricky
pivoting. Despite some practice I've yet to get them right. However the wonderful Sarah of
SerendipCostume, I'll link her instagram down below, told me about this method she saw an excellent
corset in a seamington collection where the seam allowance is turned inwards and the gauze is
topstitched into place. It's exactly what I did. I turned the scan to a quarter of an inch seam
inwards using my iron then basted it into place. Then I aligned the edge with the half an inch seam
allowance on the gauze piece pinned and basted. This was topstitched into place. Then I turned
the longest seam allowance inwards and topstitched again a quarter of an inch from the previous
stitching line which essentially fat fell the seam. I did this for both hip cores and a half of the
breast core. The other half is in a normal seam which I started doing now. For the seams I kept
referring back to the original pattern as they already had different seam allowances. Some had
a quarter of an inch others had half an inch and this was to accommodate the flat felled seams so
you didn't have to trim any. I pinned, basted and sewed them as carefully as possible then giving
them a thorough press. Along the way I also realized I'd forgotten to add the waist tape to
the busk seam so instead I added it when I sewed the busk piece to the first pattern piece. Once
all the seams were sewn I turned them inwards and basted them down. Then I topstitched a quarter of
an inch from the seam. Absolutely nerve-wracking. I did flat fell a couple of seams in the back by
hand but that is because I messed up. I think I accidentally added the lining of the back edge
as an extra piece rather than as a lining. This was my mistake I think, I'm not entirely sure.
Anyway they were flat felled by hand. Then I placed my twill tape along the bone ink channels
and basted them into place. I stitched them into place by machine. Even more nerve-wracking as
I'm usually betrayed by my bobbin thread. I sewed the edges of each tape down then down the middle
to separate the channels. Thankfully nothing terrible happened. For the boning I salvaged
the boning from my mock-up. It wasn't fully burned so I had to add a couple extra. I used synthetic
whale bone which I'm a huge fan of. I simply measured what I need, cut it and then filed the edges round.
I also had to add one metal bone on each side. I used flat steel for this which I cut, filed and
then covered the edges in zinc tape. I pinned the waist tape into place. Some of my waistline
markings had disappeared into the seams so I kept pulling out the pattern pieces to make sure it was
correct. This was then sewn into place by hand. To finish the top and bottom edges I made some
bias tape by cutting strips of sateen on the bias, seaming them together and ironing the correct
folds. I then had to stop putting off adding the little odd shape to the front of the corset.
I think its purpose is related to stockings but I can't say I'm too sure. I also had another issue,
my busk was slightly too long so I didn't have enough seam allowance left to do it by machine.
So instead I stitched it into place by hand by pulling the pieces seam allowance inside. I covered
the raw edge with twill tape. To add the binding I pinned it to the top edge, right sides facing
each other and sewed it by machine, mitering the many corners. This was then ironed up and over
the corset, pinned into place and whip stitched by hand. I swapped out the lace from the footage in
the beginning for this one. I felt like something simple might be the best way to go. I pinned it
and then hand sewed it into place. I would also like to floss this corset but I haven't gotten
round to it yet. But that is it for this corset in this video. Thanks for watching!