One Day Challenge - Making an Edwardian Corset Cover

Edwardian Threads
5 followers
2 Video Views·Feb 26, 2026
Kirilee Cosplay suggested a fun challenge of making a project in one day. So I decided that, since I needed a corset cover for my new Edwardian ensemble, I would make it in one day. It would be easy! Or so I thought...
I used the Truly Victorian Edwardian Undergarments pattern, TVE02. The corset towards the end of this video was made using Truly Victorian TVE01.
Hello everyone, I'm Rebecca and welcome back to my sewing room.
I'm coming at you today with a fun challenge that
Curely Cosplay put together or decided that we should all do
and that is to do a project in a day. So I am currently working on a
basically an Edwardian full outfit. I decided I wanted an Edwardian jumper
dress, which meant that I needed to make an
Edwardian blouse, which I then realized meant I needed to
corset and of course I also needed an Edwardian corset cover.
I do already have the petticoat and the bum pad so I did not need to make those
but I needed to make everything else. So at this point I have finished the
corset. I am part way through the blouse and the
jumper but I have not yet started the corset cover.
So I figured what better project to do for this
project in a day challenge than my Edwardian corset cover.
Now I'm making this a little bit harder on myself because
you know we're all in quarantine right now and I can't go buy any more fabric.
I've been using up a fair amount of fabric since all of this started
so I am getting low on muslin or other lightweight
white cotton fabrics, which is what I need to use to make my corset cover out
of. So I have this large bundle of muslin
scraps that are left over from various
projects or mock-ups or what have you. So I'm additionally challenging myself
to make my corset cover out of this bundle of scraps.
Now as you can tell it's quite a large bundle so I don't really think that will
be a problem. There's a possibility that I may need to
do some piecing but that is period and so really it's
just that this will probably make the challenge slightly harder as far
as the cutting out stage. Now I am going to be using the Truly
Victorian Edwardian Underwear Pattern. This one
right here that's TVO2. And I got this second hand.
I believe I got this or I know I got this from the
Bargain Basement at Costume College. I don't remember what year
but I've had this for a little while never opened it up before
and decided to make this before actually opening it up.
When I did open it up what I found was that my pattern pieces
were nicely already cut for me but unfortunately already cut
in the wrong size. So these pattern pieces are cut to a size
G. According to their pattern chart it looks like I'm pretty much a J.
So I will need to be sizing up these patterns just a little bit
but that shouldn't be too difficult. However again it does add to
the speed or it decreases the speed that I will be able to complete this.
So I'm really hoping you know it's a small garment.
I'm hoping that it should still be pretty easy to do in a day.
It is 2 18 p.m right now. I have a terrible habit of staying up
late but this is I'm filming this on a Sunday.
So I can't stay up too late because I do have to wake up early for work
tomorrow even though I get to be working from home. The other thing that I noticed
about this pattern is that I'm also missing
I believe the waistband of this pattern. Waistbands are
you know straight pieces so I'm not too worried.
It should be easy enough to do. I'll just figure that out on my own.
But let's go ahead and dive in. So the first thing that I'm going to do
is I'm going to cut out all of my pattern pieces which means digging
through my pile and finding pieces that are large enough
for all of my various pattern pieces. Ideally I would really like to take
these smaller pattern pieces and cut them out of some of the smaller
scraps. I don't know if that's actually going to be able to happen
but fingers crossed. What I'm doing here is sizing up the
pattern. To do that I'm looking at the difference
between the three sizes that are still visible in
this pattern. So coming back from G and then
taking that amount and adding it to the pattern shape
to get to my size. I'm drawing those lines into place
with a friction pen. So quick pause because I was going around
cutting out the front facing piece and what I noticed
was that the person who originally cut this
did not cut this on the G lines like I thought
they were doing originally. And in fact now that I'm looking at some of the
various other pattern pieces she has all the pattern pieces cut on
different lines. So this is going to be much more
challenging. This is actually cut on each line
whereas this is cut on like G height but A line
on the outside I think. So and this is the A
shape. So um yeah this is gonna be slightly more challenging and I have to
do some uh more fiddling and figuring but
so it's gonna slow me down a little unfortunately. This is why okay so
my two least favorite parts which I think I mentioned
in my Q&A video. My two least favorite parts of
sewing are mock-ups and cutting. Now I'm not doing a mock-up for this.
I'm living dangerously. I figure it's a pattern. It's also underwear. It's
glossy. It's gonna fit you know relatively
decently no matter what I do. Um but uh I also hate cutting.
This is one of the reasons that I hate cutting because being a plus size person
um patterns a lot of patterns buttering simplicity etc.
Some of them now are coming up to my size or I can just cut them and it's
great but not all of them are coming up to my
size and so I tend to have to size up patterns
frequently so that's not a problem. Um that's what I'm doing on this.
However once we get into things have been cut weirdly
it gets weirder. So um yeah that's gonna slow me down a little bit. I've got some
puzzling to do so I'm gonna get to it. Okay I figured all of that out. I have
now cut these two sides to my size which is a
little easier. Cut this to the size that I thought it
was and um and scaled up this one and this
side so that'll be easier. I can also just use
this. This is a facing front front facing for the corset cover um and
I can actually just take this and I will use this to
make or rather my piece. I'll use that to make my neckline so I only have to do it
once at least which is good.
So one of the other things that I have to do when I'm patterning something
which I forgot to do with the facing though I can still save it is that I am
tall. I'm 5'10 so I have to increase length in
everything um and so I realized when I went to go
whole uh I was about to cut out the corset front
facing that it's all one length for everyone
apparently which seems odd um
but I guess it works. Anyway so what I realized is that I need to
lengthen this pattern because right now this pattern barely barely hits
my waist um and that means that it won't stay tucked in.
So I am going to go ahead and I'm going to add
about an inch through the arms eye. I normally would just do it to the strap
but because I already cut out the facing and I'm really cutting it out again
I'm just going to kind of extend it right here
because right now this is too short to go around my arm you can see just how
short that is on me and so I'm going to extend the arms eye
by an inch and I'm also going to extend the bottom
by an inch. So overall this pattern is going to get two inches in length
which should give me enough that the waistband will stay tucked
into skirts. So that is the next step that I'm going to do
and I'm just going to write this kind of on the pattern just so I remember to do
it when I get to this piece since I'm not on this cutting out this
piece yet. I'm cutting them out in order of
size smallest to largest so that I can use up those small straps.
No but really why did I save a strap like this?
This isn't worth saving. Anyway so I've cut out all my facings now so now I'm
going to cut out the actual bodice pieces. Luckily I did
have that section of actual yardage of muslin because all of
my little scraps are enough for one front bodice and
neither back bodice which is cut on the bolt
um so I will be breaking into the yardage for that and unfortunately I
still have a ton of scraps left because they just my pieces don't fit and
there's just not that many pieces. I do also have to cut out the ruffle
um the ruffle doesn't really tell you the grain line it says cut
on fold over here but it doesn't tell you the grain line so I might kind of
just like play with things. I know that certain
grain lines of ruffles do different things than other grain
lines so I might do a little research first and see
which one I should be doing but if I can do the ruffle the length
of the fabric instead of the width I can use up a whole bunch of my scraps
because a lot of them are fairly narrow but very long of the
length of the fabric so that is my goal um but what I'm doing
right now is I'm taking my collar facing piece that I already
cut out and I'm laying it on my front piece just to make sure
that I have that neckline the same for both facing and for the
front um also while increasing the length of
the front piece like I mentioned earlier.
What I'm doing here is I'm placing the facing piece
up about one inch from where the pattern actually is
so that I can get that extension through the arm's eye that I'm looking for.
So because I cut the front facing piece before I remembered that I would need to
lengthen the arm's eye I will have to slightly tweak the
facing piece because I don't know if you can see these lines at all but my facing
piece would have had the arm's eye going out
a little further and winding up or shorter in the arm's eye
than um than I'm actually doing.
So my brain stopped working somewhere around
when I got to trying to figure out the patterning and sizing whatever of the
back piece um so I did something
and I have decided that I'm just going to
cut it out and sew it to the front piece
and hopefully it works if not I do have enough muslin to cut out
either two more fronts or two more backs not both so um
yeah I'm hoping that they will work and if not
I'll figure it out but I'm spending too long on cutting
my brain is melting I mean it's already been an hour and a half
that I've been cutting which is stupid um
so yeah my brain's gone so I'm probably going to
um cut out the back piece uh which I've already like drawn out but I'm gonna cut
it out and sew it to the fronts see what it
looks like and then take my dog for a walk because I need a cleanse
in fact I might even do that before trying it on so um I will be back
in a bit hello everyone it is significantly later now
it is six o'clock um but I'm back I had a nice
two mile walk with my dog and then we had some dinner
I had some dinner I suppose he had some too
um and I watched a couple episodes of tv
and cleared my mind and came back to the project so I searched all the edges
and assembled the bodice pieces I also cut out the ruffle
um and then I went ahead and tried it on I'm not wearing the corset or anything
but I figured it's gonna fit the same anyway and it's
um what I'm actually thinking here is that I may have added too much length
I know that it's supposed to be blousey and pigeon front
but it seems a little bit long having the waistband will help
because it will put it at my natural waist but right now
it is feeling just a little bit on the long
side maybe by like half an inch like it's not a lot
uh the other thing that I'm finding here is that the neckline
um now it is supposed to have beading lace which is that lace that has the
ribbon threaded through it it's supposed to
have that around the neckline so that would probably solve this problem
that said I don't know that I have beading lace so
what I might wind up doing is just putting in a drawstring or something if
I don't if I can't find beading lace but um
but I think I'm going to leave it as is it seems to be
relatively okay it's just a little bit gaffy I actually have this problem
almost always that almost everything has to
have a curved front for me if it's going to fit correctly particularly
Victorian promises um I always have to curve
because otherwise things just don't fit I can't do a straight front seam
so um so that's a common problem for me but everything else seems to fit pretty
okay so I'm just going to go ahead and run
with the pattern as is which uh the reason I searched
it is so I wouldn't have to take this apart
so I'm just going to go ahead and start adding the ruffles and following the
pattern instructions the pattern does start with the ruffles
so first thing I'm going to do is actually take my strips
serge them hem them and ruffle them so I have four strips
it called for making three strips cutting three strips of
the length of the pattern piece uh which is on
a fold and then sewing them together and cutting them into four strips which
like to me doesn't make any sense so I did
these lengthwise like I had mentioned before I did look up
uh to see how that would change the ruffles and
didn't care enough it didn't didn't do a big deal so
um so I went ahead and cut them on the length of the grain
and uh and just made them each 33 inches so a couple of them actually
don't have seams and then a couple of them I needed to piece together
some fits um so that I could get that 33 inches but
I've gone ahead and done that so now I'm going to hem these
and gather these uh with the machine I'm not going to use my ruffle foot
and then I'm going oh I also have some eyelet lace that I think I'm going to
apply so I have this lace right here a little
focus maybe well anyway I have this eyelet
lace and I think I'm going to I've never
really known how to use lace that doesn't have like an edge like this
so I think I'm actually going to run it through the serger maybe with the
rolled hem is what I'm thinking rolled hem rolled hem one edge
and then uh just go ahead and attach it like underneath
the hem of the ruffles because I think that this will look really pretty
having that all over I'll probably wind up putting this honestly all
over because I want it to be kind of cute and filly so
I'm feeling I'll put some around the the arms eyes
since it's a sleeveless and um and maybe if I can't find that beading lace I might
also put it around the neck so we'll see that later but first I'm
going to do ruffles so I'll come back to you soon
hello again everyone it's a little while later and I have
assembled all of my ruffles so they all look like that now
with the little nicely rolled hem on the back
um of the eyelet lace and then I've gathered these but I haven't pulled them
up to size yet and I've also gone and I've serged all
of the rest of my pieces the only piece that I actually have yet
to cut out is the waistband because again that piece was missing from
my pattern so I am I figure I'll I will cut that one
out once I get to that step in the pattern
just because that by that point I hopefully will have a better idea
of exactly how big it needs to be um I am used to making skirt waistbands
which I always cut four inches wide and then fold and then
the two ends fold in so they wind up being one and a half inches wide
seems a little bit wide for this waistband
so I'm thinking I might start with three and a half inches
and then have it be the length of my waist plus
so um that I will get to later but for now I'm going to start
gathering up the ruffles and attaching them
to the facings because the first step is actually to attach
the ruffle to the front facing so um a little bit different than I thought it
would be the second ruffle gets attached to this I think
but uh the first one is actually attached to the facing and the facing
little funky uh these instructions I don't know if it's just that my brain
is not working today which is entirely possible
or if these instructions are basically not English because
my brain is not processing them at all I'm reading the words and they don't
make sense so it's entirely possible that I will
completely stray from this but it's already 7 23
and I need to get this done hopefully in the next like
three hours if I'm gonna complete this challenge and still go to bed
at a reasonable hour to get up for work tomorrow so um
fingers crossed so I have pinned the first ruffle to the yoke
and wow that's springy I am a little worried because that is
so springy um I think part of it is that that is just like a lot of ruffle
for this amount of space um which is interesting because the ruffle is
actually not uh it's like it's not graded in size
it's the same ruffle no matter how large your yoke is and mine is
one of the larger yokes um so it's a lot of ruffle
and then on top of that by adding the um eyelet trim and especially the
eyelet trim with the rolled hem it's getting a lot more spring even so
um yeah this is gonna be a lot I hope it's not too much
um well we shall see once I put a little bit more together
okay so this actually looks like it's gonna be pretty darn cute they've
toned down a little bit now that I've sewn them on um so it's time to
attach the facing to the actual part of the corset cover
okay so I've been putting the facings and stuff on the
corset cover and it is my opinion now that I'm doing all of this that this
pattern is stupid um basically
so what is going on here is that this is having me do
the facings all to the outside which makes no sense
facings are facings they go on the inside
so I'm gonna have ugly top stitching like all along this yoke
in the back well it's gonna look like a yoke because it's a facing that's on the
outside it doesn't make any sense but at this point I'm far too into it to
change anything
not happy with this pattern it's funny this is like the second
truly Victorian pattern that I'm kind of doing in a row I really really loved
the corset the 1903 corset fantastic but
like a dream I had to make almost no changes and it was like perfect
this not so much so now that I have all of the facings
all sewn down um what I'm doing is uh because I didn't do it originally
so on this pattern there is a marking line
for putting on the second ruffle I didn't mark that line
and also I changed this pattern shape fairly significantly
with everything and so I just feel like that line
doesn't make any sense so what I've decided to do
is um I kind of laid down the second ruffle
second layer ruffle um where I thought it would look good underneath this first
one and I determined that that was 1.75 inches down so I have gone and
marked that uh row or stitch line for the second ruffle
so I gotta do it on the other side and then I'm going to stitch the ruffle down
and it says to put like lace or trim or something
on top of that which doesn't make much sense because it's underneath this
ruffle um so I am going to I think just do some
like bias tape because it's nine o'clock and I'm
getting tired of this project and also I'm annoyed at it because the
stupid outside facings you see look at these
silly facings that go to the outside it's just silly
just why why do you do this this doesn't make any sense
nope so yeah use this pattern cautiously
I'm back the second ruffle is done and I have
topped it with some bias tape what I'm now going to do
is put bias tape around the arm size so that I can finish that off
um I'm just going to machine it down I think
because I don't really feel like doing it by hand
but we'll see if I change my mind on that once I have the first side down
um and then I also need to do the waistband and then
buttonholes and buttons I'm really not sure that that's all gonna happen tonight
because it's already almost 10 o'clock because I have to take a short break
so yeah and I have to wake up at like 7 40 so we shall see
so all of the inside facing is done now I don't
love how machine stitch facing looks but um both the time and the fact that
this is underwear no one's going to see this except you all
um you know that's how it's going to be it's very possible though not likely but
very possible that I might undo the machine stitching
on the inside right here where it goes over the
ruffles because I really don't like how the ruffles are puckering and so I
might just hand stitch just this section um that
but it won't be today so if I do that it'll be later
but anyway um now it's time for the waistband I've decided
that I'm going to cut the waistband as um
my corseted waist measurement in this corset plus
uh half an inch just to be safe plus one inch for overlap plus one inch for
seam allowance so um I'm gonna cut that by three and a
half and see what scrap I can set
all right the waistband is attached which means it is time
for buttonholes and buttons I'm not positive if I will do all of this
tonight because it is almost 11 o'clock but um I'm at least going to start the
buttonholes assuming that I have buttons that I can use but I think I
do so uh yeah next up almost done just need
closures so one other annoying thing about this
pattern it doesn't have button placement so it
doesn't say how far apart the buttons should be
doesn't say where the buttons should go doesn't show where the buttons should go
so that's great I have to figure it out myself and especially figure it out
because they can't run into the ruffles because the ruffles go right across the
buttons so I don't recommend this pattern
so unfortunately I have failed this challenge it's 11 32
and my main machine has decided that it doesn't want to do buttonholes
anymore at all I've been having some issues with my machine
where whenever the needle goes all the way to the right or even close to all
the way to the right it just skips all its stitches so um
that's partly what's happening now and the other part is that the buttonholer
can't handle going over bumps aka the ruffles so um
that one's not working so I decided okay great I'll use my backup machine
and try the buttonholer on there um it worked fine for the first buttonhole
which had no ruffles near it then when I tried to do one near the ruffles again
no it doesn't like it so um I need to figure out
if my main machine will do a four step buttonhole because my backup machine
I don't think even has a four step that I can do
um and my main machine does have a four step
but I think it's still going to have the same issue of going too far to the right
so it's going to take me five times as long to buttonholes as it normally would
and that's not something I'm going to do at 11 30 when I'm like
being driven crazy by how stupid this project is so
um I will finish this video tomorrow I will finish this corset cover
tomorrow but messing with all this garbage is not
something that I need to do at 11 30 when I should be going to bed
so um yeah I guess this will still be a 24 hour challenge probably since I
started so late today which was also stupid
um but it will not be a one day challenge all in one day
here is a cat for happiness because I'm frustrated and Dora is happy
let's just take a cat moment okay I'll see you tomorrow
hello everyone it is a new day and the nice thing about working from home
is that I can use my lunch break to hopefully finish these silly buttonholes
um I'm gonna go ahead and do some I guess tinkering on my machine
play around see if I can find that four step on my old viking
and if not figure out how to make things work on my brother
even though I can't do anything when the needle's all the way to the right right now
so um hopefully things will open up soon and I can get that machine fixed
but in the meantime let's go ahead and try those buttonholes
all right so it took me way too long to do something as stupidly simple as
buttonholes considering what this involved with last night and today
um but they are done finally and what I wound up having to do was
luckily my big machine that I normally use does have a four-step buttonhole
and after literally physically abusing it I'm not the only one who does that right
um it decided that most of the time it wouldn't skip stitches when it went to the right hand side
um so I just had to give a little smack and uh and it decided that it would listen to me for now
um and I was able to do my four-step buttonholes I decided to just do the four-step because
it gave me way more control and I knew how big the buttonholes needed to be by now
because I had done a few successfully last night um and I was able to do it without
my feet really getting caught on the ruffles which is what was happening with the buttonholer foot
because it's so long so anyway I now have one two three four five six seven eight nine buttonholes
in I just have to cut them open and add the nine buttons and this is complete so um got a little
bit more time to my lunch I'm gonna go ahead and take care of that and I will come back to you when
I have finished um I kind of I apologize for this video not winding up really showing you
how I do anything uh I have yet to figure out a good setup for you for good angles I'm hoping to
figure that out sometime in the next month or so get a new tripod when things are etc but um
I hope this was helpful again I guess the the biggest thing here is that I don't recommend this
pattern so that's my helpful tip number one don't use this pattern um but otherwise yeah anyway
I'll come back to you soon after I've done those buttons and buttonholes all right so all of the
buttons are on the corset cover all of the buttonholes are done everything else is done
which means this corset cover is done uh well it wasn't the one day project that I had originally
hoped it would be but then again I did start at 2 18 I think in the afternoon so that was silly on
my part um it is still before 2 18 today so it's less than a like less than a 24 hour challenge
um I'm going to go ahead and put this on over my new corset and see how it looks I did not wind up
adding any beading lace or anything around the neckline because the pattern actually wound up
not calling for it uh so if it is gappy I will figure out what to do there whether it's beading
lace or drawstring but for now this is as the pattern kind of has it go together because I also
sort of ignored a lot of the instructions because they were weird um yeah so I'm going to go ahead
and go try this on over my corset and I will be back shortly all right I have my corset on that
so now it is time to try out corset cover this corset by the way is um truly victorian tbe01
I believe this pattern I highly recommend it went together super super well the it needed almost no
alteration even to the pattern pieces besides making it longer because I am so tall and um
and it was quite easy and quite uh good I think it gives me a really nice shape that I want for
this S bend so um yeah I do highly highly recommend that pattern this one maybe not so much so let's
see how this is when it's on I used fairly cheapy buttons for this which I'm not I don't know it's
what I had I might replace them at some point because I don't love them but they're just cheap
old plastic all right here is the corset cover it is real real blousy and real long I don't know
if this is supposed to be how this is it seems like like I need to take a lot out of this um
I don't think that just doing a drawstring is going to help because it really doesn't length
this long and that I think would really put all of this where it's supposed to be because you can
see how it's gapping even at the back so I think this is just I made the arms that it's too long
or something it is definitely gapping at the front too you can see but um and unfortunately
the style of making of this fully encases these shoulder seams so it's not like I can just super
easily open the seam because it's all like closed up and bound up and everything so um
I'll probably fix it eventually but for now I'm just gonna stick some pins in there so that I
this would be solved by a drawstring um I think that's where it wants to sit because this covers
the top of the corset with the ruffles when I put them here so when I take out that extra length
okay see arms are short
but overall there's the corset cover pattern that helps to give me that S bend silhouette
and helps to smooth the lines of the corset by adding 500 tons of ruffles this angle is
really amusing because from here it looks like I'm just made of ruffle with a little head on top
but anyway my takeaway from this pattern is don't use it
this was again the truly victorian tve02 this is an older copy this is from 2012
so I suppose it is possible that maybe they have made some corrections to this since 2012
but uh if you have the 2012 version or if that's still the version I don't recommend this uh this
was just weird in so many ways didn't like the instructions weren't complete they were weird
worded weirdly they were just not great and um and I mean while this is okay I don't know that I love
but overall I mean I guess it went together in probably 10 hour ish maybe a little less um that
seems like a lot for a corset cover to me but I guess I'm also impatient other takeaways I would
not recommend trying to do a one day make when you start it after 2 p.m because that doesn't
give you a lot of time unless you're working on a really small project I also would not recommend
doing a one day make with a pattern that a you've never used before is b from a company that you've
only used one other pattern of theirs and c is a pattern that's not actually in your size and you
have to size it up a lot of factors go together into ways that this was kind of doomed from the
start but um but overall I mean I now have a corset cover even if it's not exactly 100%
what I was hoping for it still pretty much works and uh that's my one day make just wanted to pop
back on here really quickly to say I did go ahead and take up the shoulder seams by almost three
quarters of an inch um and I also went and moved the buttons over about also three quarters of an
just at the top and it has solved the gapping problem solved the shoulder gapping problem
and so it's fitting a lot better now so even though it's weirdly constructed I am getting
a pretty good corset cover out of it it's very very pigeon-y so it will give me a pigeon look
but uh there we go that's the finished corset cover the actually finished I'm not doing anything
I do hope you enjoyed this video I know it was a little different than what I normally have on
this channel but when I heard about this challenge I figured I needed a corset cover anyway why not
just go ahead and try this so um I don't know that I will be doing many other videos like this
in the future I do hope to do more kind of sewing focused videos for you though but I do need to
figure out my setups first before those come out so for now if you do want to see more videos
like this or like other sewing content please go ahead and make sure you click the subscribe
button and the bell icon to be notified every time I post a video you can also follow me over
on instagram at ladyrebeccafashions where I post at least once a day with all sorts of
costuming and right now Disney bounding content and in the meantime I do hope you have a wonderful
day staying safe staying healthy and happy sewing
I am now a giant balloon
