Making a silver Moss Agate quarter Coin Ring

Change You Can Wear
145 followers
May 22, 2026
This one is for sale! Size 7 and $499
It isn’t on my website but you can contact me there to claim this one!
www.changeyoucanwear.net
This type of coin ring is just a fun and unique piece that I love to make, and hopefully, you love to wear!
AI Generated·May contain errors
Video Summary
AI GeneratedThis video demonstrates the process of crafting a unique solitaire ring using a silver quarter and a kite-cut moss agate. The creator transforms the coin into a polished band and casts a custom setting to securely hold the gemstone, resulting in a one-of-a-kind piece of jewelry suitable as a statement ring or an affordable wedding band.
Let's take this silver quarter and this kite cut moss agate and make a really cool looking
solitaire ring out of it. First step turn this into a silver band with United States of America
on the outside. We'll be using Jason's Works Auto Punch and for this particular one we're going to
be using a 5 8 inch hole. So we want United States of America on the outside so we'll put that facing
down on our die. I'm going to press completely with a steel folding cone. From this point we're
going to wrap it with some Teflon tape and then we're going to Swedish wrap it to make the sides
of the outside of the band perfectly flat. We've gone that far we're going to turn it around
and do the exact same amount of pressing the other way and that should ensure that it looks
exactly perfect the same on both sides. What we are going to do is clean the inside out
and make it perfectly polished like a piece of fine jewelry on the inside.
You know the cool thing about a ring like this it's going to be an incredibly unique ring
and you could use it for just like a statement piece or you could use it as an everyday wear.
Now silver and moss agate aren't my first choice for everyday wear but a lot of people do it right
and if you wanted a more budget-friendly wedding ring that was like really unique that definitely
wasn't going to break the bank this would be a pretty cool option. Kind of a tedious process but
it's going to be the best way that I can see to do this to get the result that I'm looking for.
That's pretty good it's very small I think we did it so now what we need to do is we're going to
put a sprue on this and get it ready to cast. It's going to take like
hardly any silver you know very small that's a pretty nice uh that's a pretty nice setting.
Our mold has been in the oven overnight it's ready to go I've got my sterling silver
button from last time I cast it here so we're done our crucible ready to quench.
Look at that a nice little custom-made kite head to put into our ring. We have the outside
sanding stick nice and fine so it'll be ready to polish whenever we get done soldering it in
and what I'm doing now is cleaning out the inside with a little tiny bulber it's a little tiny
carbide 0.3 millimeter bulber. It's going to deepen the lines where all those connection
points are and then cut little tiny little pockets where all the points are so that way they don't
get crushed when we start to set this. This seat area is more or less done I was going to finish
it once we had it on the ring but so far I've cut the back out made sure that sits down below
the top so that way we can actually set it and now what we're going to be doing is placing it
on this band so what we're going to do is we want it to stay in a certain spot so I'm going to put
a little bit of sticky wax basically on the surface and then we're going to place this.
I want these back points to be right against the edge so there's only one angle to cut.
Laser blade just kind of come down directly on the angle you can see those marks now that's
what we're going to be cutting. So you can tell it's all held together that's because
I tack welded it together with my Orion I don't know what it's called it's an Orion
pulse arc welder. I'd say one thing it was expensive but I don't know how people do this
kind of thing without one. More power to you if you can. I would do a lot more crying I think
but since I don't like to cry especially in public I bought a welder. Oh boy I just checked the stone
it all fits in there perfectly level everything looks great so now we're going to polish it with
these guys we'll get a little green rouge on it and then just polish the inside of it.
And so what I'm going to be using to set this is my Graver Max G8 engraving system.
It's air powered and we're just going to start to hammer this over and we're going to be really
careful. Aga is pretty soft so you don't want to put too much pressure against it if this was
something a lot harder like a diamond or a sapphire you have a lot more leeway but not
not with one of these. I'm going to hold it down with my finger start to hammer it in once we have
it pinned then it'll be a little bit easier but until then it's kind of tricky. Hey thanks for
watching this ring incorporated two of my favorite things which are kite cut stones
and bezel settings when they come together oh I love them I hope you guys enjoyed it as well
if you were interested in this ring it's a size 7 it's a 9x6 kite cut moss agate
and it's available for $4.99 just give me a shout for my website changeyoucanwear.net
