
The Kelley's Country Life
18 followers
How crazy is this?
Wow, that was awesome.
That was so stinking awesome.
That handled that no problem.
So welcome back to the shop, everybody.
I am super excited about this tool right here.
So today we're gonna make a quick little video
on a brand new tool, and believe it or not,
this is kind of a dream tool for me,
something I have desired for forever.
And the reason it's sitting in the shop
is because we have a lot of currently ongoing projects
and some huge metalworking projects
coming up on the channel.
This thing right here is gonna help me complete those
a whole lot quicker and more efficiently
than what I'm currently using.
All right, so if y'all are not familiar
with a electromagnetic drill, in a nutshell,
this is basically a portable drill press right here.
But as you can see, it's got a drill
that's on steroids right here.
It can drill some massive holes.
So what's so cool about this?
Well, it works like your typical drill press,
except this particular model happens
to take these annular cutters.
You can see they are machined cutters.
You can go all the way up to larger sizes than I have here,
although that's some pretty massive holes.
So they use different style drill bits
than your typical twist drill bit that you run a lot
and your handheld drills, drill presses, things like that.
So what really makes this thing cool,
it's got this huge electromagnet in the bottom right here.
You plug it in, you flip on this switch,
and it locks down to anything you put it on.
So the beauty of something like this is,
well, it's basically a portable drill press.
So you can go put this on big pieces of steel,
anywhere else, maybe truck frames, semi-frames,
anything you can think of.
Flip the magnet on it, it'll hold to it.
We're actually gonna test today to see if I can put this on
with a piece of metal on the vertical position,
and if this will hold it,
and how much force it takes to pull it off.
So this particular electromagnetic drill right here
is from Vivor.
Y'all have seen that I've worked with them a lot.
I actually reached out to them about this
because right now I'm right in the middle
of the stair build for the house,
and I have a tremendous amount of half-inch holes to drill
in 3H steel.
And if you've ever tried drilling holes that large
with a handheld drill, it's a nightmare.
I would be here all day long.
I would probably snap, Lord knows how many bits,
wear through how many batteries on the drill,
and it just is hard on your wrist.
So I've got this thing plugged in.
Let me show you the way this works.
Right here is the magnet you can flip on.
I just heard it kick in right there.
Now, check this out.
I can push this drill over,
and this is an eight-foot piece of 3H steel right here,
extremely heavy, and it's gonna take it right with it.
But if you flip the magnet off,
where it lets loose of the metal,
the drill comes right up.
Now, this particular model drill
also comes with a coolant tube.
That's one gripe that I have with this.
It came with a piece of quarter-inch hose
that goes from here to right here.
So you can put coolant in here
that'll run out the bit itself and cool the work,
but the hose that come with it is a little too short
when you're in the full down position.
So the good news is that's quarter-inch tubing,
the same stuff that goes to refrigerator hoses
for your ice makers and things like that,
and I have a ton of it here.
I personally don't know if I'm gonna use the coolant tube.
I'm gonna look into maybe ordering some and trying it,
but I'm a big fan of taking a little squirt bottle
with some oil and putting it right down
as you're drilling these larger-size holes.
So Vivor makes a ton of different models, by the way.
This is kind of like their Cadillac model
from what I've seen looking online,
and it's about a third the price of your big-name brands,
half price of, like, say, an Evolution
or some of your mid-tier brands.
But I went with this particular model too
because it also has variable speed.
That's kind of important when it comes to cutting
all these different-size holes.
I mean, you can get annular cutters from 7-6-10s
all the way up to Lord knows how big.
This one claims that it'll drill
up to a two-inch hole through steel.
That is massive.
I don't think I'll ever need holes that big.
This annular cutter kit that I also got from Vivor
right here has up to an inch and 16th bit.
That's probably bigger than anything I'll ever drill as well.
So they sell different model drills
with different attachments
that either take your standard twist bit or annular cutters.
Some of their drills already come with some annular cutters.
Some of them you purchase separate.
So I'm gonna leave a link down there.
You can go on their website and look,
but I did want to introduce you to these style drills
because a lot of y'all have probably never seen them before
and they have so many different models.
So you may find one that fits your needs better.
They have them for literally half the price
of this model right here.
So everything seems unbelievably well-built.
I'm shocked again for the price.
All metal frame on the drill,
heavy cast metal for the entire housing,
machined metal parts.
So I have yet to use this.
I was waiting to do the review.
I want y'all to see this with me.
I've got a ton of this 3H steel.
It's the thickest steel I have in the shop right now.
Let's drill a few holes through it.
See how well this works
because this happens to be the exact same steel
that I'm about to start using on the stair project
that's going on in the house.
This thing is just massive, extremely heavy.
Like I said, this feels so well-built.
So here's the beauty of this drill.
You just move it to wherever your work is
and get it close to the edge.
I don't want to waste too much of this steel
because I actually need it.
So it's got a little center finder
that you can drop down in the bits itself.
So if you want to center it up on your work
or if you make a punch.
So I'll just flip the magnet itself on right here.
Now it's not going anywhere.
Like literally, let's see if I can pick this
and that whole plate is still up.
So this is probably going to get a little loud.
Let's kick the motor on,
show you the adjustable speeds here.
Let's cut our first hole.
Okay.
Cut a nice clean hole right through.
I'm going to speed it up a little more on this next one.
All right, turn the magnet off.
Now we can move this right where we need it.
Get a little closer here.
So let's go a little faster this time.
I know we don't want to go too terribly fast
cutting through steel,
but it might be okay with a bit this size.
Okay, that was so much faster.
Didn't seem to have a problem speeding up
and we can go even faster than that.
Bit looks good, punched a nice clean hole.
Get this cleaned up and show y'all.
So take a look at those holes right there.
Nice clean punch through.
So absolutely clean on the bottom.
That's awesome.
That would take quite a while
through that thick of metal with an old twist bit.
All right, so now I'm going to show you
how you take these bits out.
It's really easy to do with these cutters.
All right, so you just loosen up
these two set screws right here.
All right, you pull that out.
You can take this center pin out.
I'm assuming this is also what plunges down
and cuts off the flow of oil as well.
So I know what you're all thinking.
Yeah, let's just go ahead and figure out
how well this does with this big boy.
Look at this size of that bit right there.
That's a massive hole.
Turn the magnet back on.
All right, this is going to be interesting.
This will be the biggest hole
I personally have ever drilled.
This is just not even really possible
with a standard handheld drill or anything like that.
All right, we'll keep it on the same speed.
That may be a bit fast for a hole this size.
I really don't know, to be perfectly honest with you.
Let's find out.
Okay, that was me not giving this very much force at all.
I didn't just want to crowd it.
I'm still learning.
And that was an extremely quick hole in my mind
to be an inch and 16th hole punched through 3-8 steel
in a matter of seconds.
Now you heard I decided to slow it down
and that's because it was spinning so fast
I was just seeing chips going everywhere.
A little bit of squealing.
As soon as I slowed it down,
I started seeing more of these long strings,
which is typically what I see happen
when I watch other people run their electromagnetic drills.
So since I'm in a learning phase,
this kind of made more sense to see this.
This is what I see a lot of the professionals
results looking like.
Wow, that was awesome.
That was so stinking awesome.
That handled that no problem.
I think it might could run a two inch hole like it claims.
I'm gonna turn the magnet off
when I get my camera this close.
That thing's so powerful.
But look at that nice clean hole.
Hopefully you can see the underside nice and clean.
That's another thing I love about this.
Clean hole all the way through.
And if you look right there at the tip,
I'm not gonna touch that,
but it's actually got a metal plug in there.
So I should be able to pop that right out.
That's the beautiful thing about these annular cutters.
They don't remove the metal out of the entire hole.
They just cut a plug out.
That's what makes them so efficient.
This thing is an absolute beast, beast.
I think I prefer the squirt bottle with oil too.
That way I can easily control how much fluid
that I want to go down there.
Now, with that said,
there is a like needle adjustment
on this coolant reservoir up here.
So if you wanna run the coolant, you can adjust it.
But I have a feeling it's just gonna be easier for me
to run a typical squirt bottle like that.
Check that out.
So cool.
Nice thick plug.
That's why these are so efficient, so fast.
I did not have to remove all that metal,
drill it out like you do with a twist bit.
All right, so I've got it on here.
Let's kick the magnet on.
How crazy is this?
Now you can start to see where this drill really shines.
You could go up to a beam that's already mounted.
Like I said, a semi-truck frame, things like that.
Think of the possibilities this opens up right here.
You can't drill these size holes with a handheld drill
and you can't take certain things to a drill press.
This is awesome.
I'm gonna put a little pressure on it.
Hopefully this doesn't...
Okay, y'all.
All right.
Let's see here.
You see the metal bowing?
I almost wonder if I could hang from it.
Although that's gonna start getting dangerous.
If it does snap and pull loose,
me and it go crashing to the ground
and I break my brand new drill.
What I can tell you,
with as much force as I just put on that,
there's no doubt this has plenty of magnet capacity
to hold it to a thick piece of steel
and for you to go ahead
and do your drilling in this position.
That is stinking.
That is so stinking cool, man.
That is awesome.
All right, some real quick specs before we wrap this up.
I'm reading off the backside.
Like I said, this claims it can do up
to two inch hole drilling, which is just insane.
Runs on 110 volts.
This thing is 1680 watts now.
Like I said, this looked to be
their most powerful model they have.
So you better have a dedicated 20 amp circuit
to run this thing.
If you have 15 amp circuit in your shop,
they do have models that are less powerful
than this one right here.
But I wanted to go ahead and get a good one.
If you're going to have a tool like this,
you might as well get one that'll take care
of your main needs and give you room to expand
should you have a bigger job pop up down the road.
And the speed, a lot of people may want to know that.
200 to 500 RPMs.
The 200 I found a little too slow,
but I could already tell right there.
The smaller bits, the faster the speed
seemed to work better.
That big bit right there, slowing it down,
gave me the results I was looking for.
Those big kind of, well, slinkies is what I'll call them.
All right, well, I wanted to give y'all
a brief introduction here and show you this
because by the time you're watching this,
this thing may already be in use.
I'm already building the loft stairs, stuff in the house.
I'm literally working with eight inch I-beams,
three-eighths plate steel, like you're seeing right here.
Some pretty massive stuff for, well,
just DIY build like I'm doing.
And this is about to get a ton of use
just on this one project alone, drilling a ton of holes.
So don't hesitate to come back to this video,
drop a comment and ask, how's it working?
Did you have any issues?
Because over the next few days, literally,
it's going to drill a pile of holes.
And then I have some very massive projects in mind
for this in the future.
So links are down in the description.
Also check, there's typically coupon codes
and stuff as well.
So you can get a little extra discount on this.
And by the way, this particular company right here
is offering a shop campaign all the way through November.
So they have all kinds of tools and shop stuff on sale.
I have a link down there for that as well.
If you want to go check that out
and look at all the different tools
and shop supplies that they offer.
All right, I am super excited.
This is probably going to be one of my favorite tools
that I own in the shop now.
And you're about to see it used a lot
in these upcoming stair build videos on the channel.
Thank y'all so much for watching.
Catch you on the next video.
