
The Kelley's Country Life
18 followers
So welcome back, everybody.
My name's Andrew,
and you're watching the Achilles Country Life.
If this is your first time visiting the channel,
thanks so much for stopping by.
We post weekly videos like this,
so consider subscribing.
All right, so the time has finally come.
I have just got over my two weeks of COVID,
called it twice, by the way,
and it really put a damper on this project.
A lot of y'all have been looking forward
to the outdoor kitchen build.
We're starting that in this episode.
So real quick, I do want to say
that this project is sponsored by Vivor.
If you haven't heard of Vivor, a lot of y'all have.
They carry everything under the sun,
and I literally mean everything,
from ice makers to restaurant equipment
to home equipment to outdoor equipment
to stuff for your tractors.
Anything you can think of, go to their website, plug it in.
They probably have it.
So as you can see, we have a smorgasbord of items here
that's really gonna spruce up this outdoor kitchen build.
And again, a big thanks to Vivor
for sending some of this stuff out.
And by the way, I contacted them
because I stumbled across some stuff on their website
and was like, man, this will really make this kitchen
look a whole lot better.
Now we're gonna show this stuff off
a little bit later in the episode
because we've got to pull some of it out
to start framing up and building our rough skeleton today.
So we'll talk about that then.
So I thought it would be fun to do something.
A lot of y'all reached out a while back
with design ideas and material ideas
for this outdoor kitchen space.
And a very common response was we should do
Corian or those man-made countertops.
Well, I went and priced them.
Everybody around here cuts them and installs them.
So it's an all-in-one price.
Wow, they were not as affordable
as most people were thinking.
So I thought I would do something fun here.
I'm gonna try to build this entire kitchen,
everything from the appliances to the materials,
you name it, for the cost of what the quote was
on Corian countertops.
So in the corners and all throughout the walls
of this house is six by six posts.
This is a post frame house, a pole barn house.
So what I'm gonna do, I can actually access one
right here underneath this hardy trim.
It's gonna shoot a screw in,
or you can use a nail, whatever you want.
And I'm gonna hang a string off of it.
So because these posts were originally laid out perfect
with a string system just like this,
I know I can pull from post to post
and get a perfectly straight line
and a good starting point or a reference point
for I want the backside of our kitchen bar top to go.
And then we're gonna take off again this direction.
So my plans is to lay the cabinets out
in even measurements like eight foot here.
It'll utilize eight foot paneling,
eight foot material perfectly,
eight foot lumber, two by material
and 10 foot that direction.
And I bought the majority of everything in 10 foot
minus the paneling that I still have to go back and get.
So this will help with cost, overall layout
and just kind of get things where we think they need to be.
All right, I'm gonna show you all my layout real quick
and what I have done.
And by quick, I mean,
there's lightning bolts dropping right here,
too close for me.
So I need to get all this back in the box
and get inside for a minute.
So I have literally spent hours today
drawing and laying out on the floor,
making a few mistakes,
drawing out our entire layout.
Layout is absolutely critical for something like this.
I do not mind spending an entire day doing layout
to make sure tomorrow I'm not tearing out
and wasting a bunch of lumber and everything else.
All right, so as you can see, it's next day.
We had a heck of a lightning storm come through yesterday
and shut me down for several hours.
So I went ahead and laid out all of my post brackets.
I'm using four by fours and most corners.
So you can see that I spent a lot of time yesterday
drawing out, lining out, I even marked everywhere
that I want a support post.
I'm gonna be anchoring these plates down
with Tapcon screws.
These are made specifically for concrete.
They're a quarter inch thick,
and I'm going to over drill the hole by about an inch.
Always wear safety glasses when drilling in concrete.
It can actually bust back out and up towards your face.
I love this drill.
It makes such quick work of this.
All right, now that I have all my holes drilled,
I'm gonna blow the dust off the top
so my bracket sits flush.
And most importantly, I'm gonna blow down into the holes
to get any buildup of dust and chipped concrete out of there.
The last thing you want is to tighten your fastener down
and it doesn't securely fasten down your bracket
because your hole is packed full of materials.
All right, now I'm gonna take my bracket
and put these Tapcon screws down in there.
And I'm gonna secure them with my impact driver.
And I'm not gonna go full torque on these
because you can actually strip out that hole.
All right, that's not going anywhere.
All right, so we're getting ready
to cut our four by four post
and mount in the brackets that we just put down.
And I need to connect the post to the brackets.
I could use screws, although it needs to be coated screws
because I'm using pressure treated lumber.
I could hand nail and do a lot of different things.
But y'all, a lot of y'all that watch me build this house,
remember this guy right here.
It's the Bostich F33 PT.
I love this nailer.
It's a bit big, bulky, and heavy.
But there's one cool thing I wanted to show y'all
about this nailer right here.
So this is your framing nailer tip.
You push this button, take this right out.
Now I can convert this particular model
to metal connecting nailing.
You see that little finder right there?
You stick that in the holes on those metal brackets
that are already pre-drilled from factory.
Put that in the hole, pull the trigger,
and your nail shoots right through that hole.
So no hand nailing.
Plus, because this gun will run metal connecting nails,
look at the shank on these.
Much, much thicker material.
That's just what you want in a metal connecting nail
because it needs a lot of shear strength.
These have it, far thicker than your standard framing nail.
And I'm also running hot dip galvanized nails as well.
Again, you gotta do that in that new salt cured lumber
because it will corrode fasteners quickly.
Now, because I'm about to make several
of the same types of cuts,
there's something you can do on these miter saw stands.
So I've made my first mark to the length
that I wanna cut several pieces.
Make sure the blade's gonna line up where I want it.
And we'll come down here, flip this flat bracket over,
adjust it up.
All right, now we'll run this back in
till it bumps that piece of wood.
Lock everything down.
Now every time I slide a piece and make contact with this,
I know I'm at the exact distance that I wanna cut.
That's a feature that a lot of people don't utilize.
Just slide that down, make contact.
Ready to cut again, get the same exact size.
All right, so I got my first post set in
and lined up with all the marks that I made on the floor.
By the way, we're going for around a 45 to 46 inch
finished bar height.
That's the very top, which is higher than normal.
Most people have a 42 inch,
but we're going for what's called an extra tall bar top.
So when you're nailing these posts in like this,
I'm just gonna use a quick framing square,
get them close.
They don't have to be perfect, but you do want them close.
Because even though I'm nailing them in,
they're still gonna have some give and wiggle room this way.
There's no point in putting a level on them just right now.
The framing square worked just fine.
Put it right in that little hole down here.
Now I've got six metal connecting nails going in
in a matter of seconds.
So I've pretty much built this house by myself,
which means I have worked by myself quite a bit.
And I've had to learn a lot of techniques
to hold things and to be a second, third,
or fourth set of hands.
A cheap set of clamps can by far be
your biggest helper and friend
when it comes to holding materials
if you're working by yourself.
For example, I'm about to run a long board
all the way through here.
So I'm just gonna throw a clamp up right here.
Just get close.
Put one down here.
Now I can just bring my board in here,
loosely place it,
and let these clamps roughly hold it in place.
It's not perfect,
but now I can easily work with the material.
A good set of clamps has saved me time and time again
working by myself.
So you can see I'm being a little odd
with the way I'm laying out some lumber.
Some of it I'm laying flat
because I'm gonna do almost like stud framing
down here for all my doors.
And then some of it,
I'm putting it straight up and down like this
to get the strength for the plywood
that's gonna lay up here,
then the cement board,
then ultimately my tabletop,
which I have, or countertop,
which I forgot to mention to y'all.
We've decided to go with tile,
but I'm doing it in a unique way,
a special type of tile,
and I'm trimming it out in a way
that I think is gonna be DIY friendly and look good,
not just like your standard old tile countertop.
All right, so here's another one of those situations
to where the clamps just come in handy.
Gives me that second set of hands
that I desperately need in a situation like this.
And I don't use this drill often.
It's a right angle drill.
It really comes in handy
for getting in tight spaces like this.
And I'm actually going to screw up
some big pan head screws
to hold this drawer set up into these timbers
that I just put in,
as well as this piece right here.
I know DeWalt now makes
that little right angle attachment.
Actually, they didn't come up with it.
That thing, I've been using one of those
for 15 or 20 years from a different brand.
They just don't have the torque
and they don't hold up like a right angle drill,
even though this is a really old model right here.
All right, I am at a stopping point with this project.
Gotta make a big material run
and we're running into the weekend here.
Let me show you where we're at.
So I kind of just did a lot of working
without recording because it was the same old, same old.
So I'll give y'all a look at the layout here
because this is your first real time
getting to see everything mounted in place.
But I want to let you know
what I have done to every single drawer set
and every single door,
you can see I boxed it out completely.
And that is so whenever I come
on this other side right here
and lay my wood sheathing,
my paneling against all this,
I can come back with my router with a trim bit
and these pieces will be out.
I can punch through, trim out that square
and then reinstall the doors
once the sheathing's on the outside.
So everything is nice and boxed out.
Now I started laying in my,
basically my studs over here
because we're going to put a thin sheathing
on the outside here.
And I want to make for sure
I have a very tight stud spacing
so there's no warps.
And this paneling that we're going to get,
this actually kind of a groove paneling,
somewhat mimics the look of the house,
but not exactly the same.
I have also spaced all my bottom plates off of the floor.
Did that for a very specific reason.
We're going to leave a gap
all the way around this entire structure
because water does blow up here.
We're going to pressure wash the porch,
storms, rain, everything blow water in.
And we want a little bit of air
to be able to make it underneath the bar to dry it out.
So that was important to us
and something that we thought we really should add.
So I'm not going to start on putting my two by fours
over here for vertical supports for the paneling
because we have to figure out something here
coming up in the next episode.
All right, so I figured a good way to wrap this episode up
is to give y'all your first big visual
on the way everything is going to look.
A lot of y'all have been excited about this project,
asking about it.
So here we go.
Let's go ahead and roll through
all the stuff that Devor sent us real quick.
And then I'm going to show you
what we chose for our countertop
and what cooking appliances we're going to put out here.
All right, so for starters right here,
I thought this would be the best place for it.
We have a trash can pull out
and I don't know if I have the right size can for this
or not, so when I grabbed a house,
it looks like I can go with an even bigger one.
So this is going to be a couple of access doors right here
because this is the area
that's going to get really interesting.
And I've got to spend some time thinking about this.
So I'm probably going to be cutting,
I know I'm going to be cutting this board out
and some back here,
and we're going to build a dropdown area in here
for our Blackstone.
So I'm going to take the legs off of our 36 inch Blackstone
and we're going to put it right in here.
And I'm still making my mind up what I'm going to do.
I'm probably going to tile that area.
I know I want to put concrete back or board.
I want to do everything I can to make sure
whatever materials are there are fireproof and safe.
So I'm still playing with that in my head,
but we're going to make our decision really quick.
So this entire section right here will be dropdown,
the floor will be down here.
And like I said,
we're going to have a 36 inch Blackstone here
with room all the way around it
for it to kind of breathe and get the air,
the hot air up and out.
So that's going to be exciting.
That's what this whole space is really about
is our Blackstone that we use all the time.
Now, right here beneath the Blackstone,
I thought it'd be a good spot.
This is a three drawer pullout.
We're going to put like our spices
and whatever else in here for cooking.
Now, there is nothing that we can do
to make this space rodent or bug proof.
Let's just face it.
It's an outside space.
There's no possible way to seal this up
without just spending way too much time and money.
So whatever we do put in here,
we'll be in a glass container.
And then we've already done ordered glass spice racks,
which will be inside of a glass container.
So nothing should be able to chew through or get into that.
And if we wind up having an issue with that out here,
well, our spices would just go back inside.
Plus we got to see how they react
to the heat and humidity out here,
but it's going to be in a closed space.
So we're going to play with that.
And if y'all have some experience with that, let us know.
Worst case scenario,
they just go back inside whenever we're done cooking
for the afternoon.
Over here is another door set.
So we have plenty, I'm utilizing, as you can see,
there's no open space.
I'm utilizing all the space inside in here.
So on the next episode,
we're also going to build a lower shelving
inside of this as well.
Huge, and I mean huge storage back here.
What that's going to be for,
we're probably going to wind up putting a toaster oven
in a microwave out here that we can take in and out
and put up on our big tabletop here.
This is going to be the spot where those are going to go.
So over here, this entire space right here
is food prep area where we can put our food,
put our seasons on, wrap it up in tinfoil,
whatever that may be.
So we have another two drawer set here.
This is going to be the perfect one for Saran Wrap,
tinfoil, things like that for covering up our dishes.
Maybe, I don't know, one of these areas
we'll probably have potholders, things like that.
And then of course, big drawer storage underneath here,
or big door storage, I should say.
Right here is our sink.
We originally were just going to go
with a little small hand-washing sink
because we're still not planning on doing dishes out here.
But let's face it,
you're going to wind up throwing dirty utensils,
a pan, a few other things there.
So we did wind up going for a deeper, bigger sink.
Although this is not as big as they make,
but I'm working with limited room here.
It's plenty big enough for pans, sheet pans,
nine by 13 baking dishes, things like that.
So this will be the sink area.
And then down here is going to be access for the plumbing.
And there's also a gas line back there,
which I can access through here.
Now, in addition to the big Blackstone area
that we're going to build here on the next episode,
we decided we want to go ahead
and do a full cooktop out here.
I was originally just going to do a two burner cooktop,
but I decided to go ahead and get a five burner.
So it's got the big, powerful burner in the middle,
a couple simmer burners,
and your standard ones right there.
Here's all the knobs.
And we're going to have this plumbed
into our big propane tank as well.
I'm actually going to notch this area out
that you're seeing right here.
And that's where this is going to be.
I'm going to bring it a little bit closer to us.
Plus we're going to have a bar top overhang right here
that I don't want interfering with pots and pans.
All right, we'll briefly talk,
because I know this episode is probably running long,
but ultimately what we decided for our tops
is 12 by 24 tile.
We're going to do a really tight spacing for our grout line.
We're doing extra dark grout.
It's almost, it's a charcoal color grout as well,
almost a black.
That way it doesn't show any stains or any issues.
I know that's a lot of concern for people.
And we're going to seal this up really, really well
before we use it.
Seal the tile and seal the grout,
but we went dark everything so it shouldn't show stain.
And I did the 24 inch tiles.
So, well, you only have grout lines down the middle.
I don't have grout lines running everywhere else.
So I can, I can butt it and have limited grout lines.
Now also in the next episode,
we've still got to build our bar top and supports up here,
but long story short,
I'm going to use the same 12 by 24 tiles.
And we're going to run 12 inch ones all the way down,
basically making a big L shape.
All right, without running this episode much longer,
I know a lot of our everyday viewers was really involved
and sent a lot of suggestions out
on how they wanted this built.
And a lot of people are going to wonder
why we did not go out to this post.
Well, look at there.
If we went to this post with the cabinets,
then brought the bar out to here,
look at how much more room,
much more real estate of the porch it takes up.
Then you've got your chair sitting somewhere over here.
We're getting so close to the edge.
We have been really watching this house
over the last few months since we've been living in it.
And this is about the only dry spot
that remained on the porch
whenever we get these severe afternoon thunderstorms
that blow in all the time.
So bringing the bar top all the way out to here,
one takes up walking room and real estate of the porch.
We don't want to take up any more.
We had plans for all of this space
and it was just constantly going to have our blackstone,
our cooktop, bar top, everything getting wet,
getting unnecessarily wet, our bar stools.
Other people constantly asked
about why we didn't open this end.
Well, it takes up way too much storage,
way too much countertop area.
And I need to run electrical
and plumbing gas lines through here.
Keep in mind, we're going to have electrical outlets up here.
I'm doing under counter lighting,
all kinds of fun stuff's coming.
Plus if we did the bar where you open and walk in this way,
the bar would have had to stop right here
because of our windows.
Well, you would have lost several feet of the bar.
It would have been much smaller.
Plus the last thing I want
when you're pulling up in the yard
is to look right into a kitchen
that's got towels hanging and utensils and all.
It just doesn't look good.
Now we'll have a nice clean wall over there
and we can put decorations and stuff like that on there.
The last thing I forgot to mention,
the refrigerator is going right in here.
I'm going to build a little cubby
and we're going to do a same tile top right here.
You can see it's a drop down top
and we're using this window as a pass through.
So whenever Tiffany or me is inside,
somebody can knock on the window real quick
or if we're prepping to get stuff ready
out of the refrigerator or freezer in there,
we can bring it right to the window,
open it, set it outside and have everything ready.
That really helps eliminate all that back and forth
that everybody's talking about.
All right, I've talked enough.
Thank you again, Vivor for hooking us up
with all the stainless stuff right here.
That's just awesome.
It's just going to make this space look so much better.
And if you're interested in these products,
they, I didn't ask them to,
they just up and decided to give discounts
on everything that you see here.
So I'll put all those links down there.
It's for a limited time,
but if you happen to be interested in the drawer sets,
the trash pull outs, any of these doors,
they've gave pretty substantial discounts.
Now, if you need some of this stuff in different sizes,
they offer all different kinds of sizes.
They also threw a couple of coupon codes at me
that I'll put down there in the description
and you can get 10, 20 bucks off,
whatever it is off of anything that you buy.
So keep that in mind.
Okay, well, it's the weekend.
We're going to enjoy ourself first weekend.
We've had COVID free and several weeks,
and I've got to make another hardware store run
and pick up a bunch more materials.
So there's going to be a delay before you see the next video
just letting y'all know,
that doesn't mean work's not going on.
I'm working for several days,
then recording and getting content out to y'all.
All right, catch you on the next video.
