How to Install Floating ShelvesDIY Floating Shelves

And More
49 followers
46 Video Views·Oct 19, 2022
This is my impression of a floating shelf.
It's not a very good one.
But if you want to know how you're supposed to do floating shelves,
watch this video.
I'm going to show you the right way to do floating shelves
by taking you inside a client's home,
taking down a floating shelf that was done completely wrong,
and putting it back up the way that it should be done.
So watch the video.
You'll learn everything you need to know.
And don't forget to subscribe to my channel.
Do it.
All right, so we already finished our box floating shelves in the other room.
Those are good to go.
I actually just put some primer on them.
So while those are drying,
I thought I'd come in here and show you guys how to do regular floating shelves.
Now, I'm not installing a new floating shelf today.
What I'm actually doing is fixing an old floating shelf.
Now, a lot of you guys might have shelves like this in your house.
They sell a lot of DIY kits online that you can do your own floating shelf.
Comes with the shelf and the hardware.
The issue you can see is the hardware is not very good,
as you can tell from this shelf right here.
So let me pull this off and show you what we're working with right now.
So this is what the store-bought hardware typically looks like.
These really flimsy brackets.
Problem is, it's hard because this shelf is usually pre-drilled.
So it's hard to get those to land right on studs.
So you don't want to hold a floating shelf up with drywall anchors.
It's just not a good idea.
You can't put a lot of weight on it.
I like making shelves that you could jump on, do a backflip off if you wanted to.
And that's the goal here.
So we're going to take these off and we're going to use some different brackets.
Let me show you what those look like.
Now, you can do floating shelves in two different applications.
Sometimes I put floating shelves up over tile,
and sometimes I put them up straight on drywall.
If you're going to do them on tile, you actually want to use this bracket here.
I have these custom fabricated for me.
Basically, it's just a piece of half inch round stock welded onto a quarter inch plate.
If you're going to put it on tile, you put the bracket up first,
then lay your tile over the top.
Find the studs.
You put this right on the stud.
You got two nice beefy screws anchored in nice and solid.
But, issue is, you're not always doing it over tile.
Sometimes people want them right on drywall.
So I also have these fabricated for me.
A much smaller plate.
This isn't quite as sturdy, but it's very strong still.
The nice thing about this is with the inch and a half plate,
you can hide the bracket behind the shelf
because you have to still remove a little bit of drywall
so you can put this directly against the stud.
You could technically put this over the drywall.
The issue there is, with enough force, drywall is actually going to compress
and your bracket's going to get loosened, which isn't a good idea.
So if you can, you want to put it right on the stud.
So first we got to get these old brackets off of here
so we got a clean surface to work with.
Now, unlike the store-bought bracket system with the shelf,
where the shelf comes pre-drilled to fit the brackets,
we're actually going to put our brackets up first,
make sure they're on studs,
then measure the shelf and drill the shelf to directly fit the brackets.
This way it's super strong.
You don't have to worry about moving your shelf around to find a stud.
All right, so now that we've found our studs,
we're actually going to use our bracket as a template to trace around
so we only remove the very minimum amount of drywall that we can
because, remember, the ultimate goal is to hide your bracket,
the cutout drywall, everything with your shelf.
The other thing you want to watch for when you're doing this
is you want your brackets, obviously, to be level so that your shelf is level.
So the best thing to do is to do one bracket first,
put a level on it,
and use the level to determine where your other bracket's going to go
up and down on the wall.
So we're going to cut this drywall out, put the bracket on,
and we'll make sure it's nice and level before we mark out the other one.
So you can see we cut out a hole exactly where the stud is.
That's going to sit perfectly on the stud.
So when we secure that down, it's not going to be able to go anywhere.
You also want to make sure that you use a nice long screw.
You don't want to use a little one-inch screw
because it could pull right out of there.
Two by fours are three and a half inches wide.
I like to use at least a two-inch screw to sit it in there nice and sturdy.
You can see that's super strong.
All right, so with our first bracket in, it's time to throw a level on there.
We've already got our other stud marked out right over here.
So we're just going to make sure that these brackets are perfectly level.
Double check.
Yep, that's right where our stud is.
Trace this other bracket.
Now we're going to cut this drywall out.
Throw this one up there.
Then I'm going to show you how to drill those shelves.
Now that we got it cut out, before you hook it to the wall,
you want to make sure that it's level.
Just in case your hole is a little bit bigger than you meant to make it.
But we are still dead on right there.
Nice and sturdy.
All right, so we got both of our brackets on there.
They're nice and sturdy.
We made sure they're perfectly level.
Now we want to take our shelf.
Throw it up there.
And you want to move it back and forth.
Get it positioned right where you want it.
We're going to put it pretty much right back where it was.
So make sure it's going to cover up all the old holes from the other brackets.
Now what you're going to want to do is just rotate that shelf straight up
and mark right in the center of each bracket.
Just a little line.
Just like that.
So we know our bracket's there and we know our bracket's right there.
Double check the back side.
Make sure there aren't any existing holes in the shelf
that we're going to have to worry about.
You don't want to drill halfway on another hole because that's not going to be a tight fit.
There isn't.
So now we can drill these out.
Slide it back up there.
All right, so the drilling process isn't really that complicated.
Lots of people get stressed out about drilling perfectly straight hole.
Super easy way to do it.
The things you're going to need.
A drill, obviously, with a half inch drill bit.
This one's super long because normally the shelves I do are 10 to 15 inches deep.
But you don't need one this long if you're doing a smaller shelf.
Half inch drill bit, corded drill.
You can use a cordless drill.
The corded drill just has a lot more power.
Lots of times when I do floating shelves, they're solid hardwood.
So the corded drill just helps get through the material.
Then the thing that I have found that works the best
to get your holes perfectly drilled is a doweling jig.
Now most doweling jigs go up to about three-eighths inches for their inserts.
But if you get...
This is the Rockler doweling jig.
If you get this one and take out the biggest insert,
the hole that comes standard in the doweling jig is a half inch hole.
So you can use this to perfectly line up your hole that you're going to drill.
Self-centers itself and then it also guides you into the shelf
so you know you're drilling perfectly straight, left to right, side to side.
So you don't have to worry about it.
So the easiest way to mark your depth on your drill bit is just to put it right on the wall.
Make sure it's on the drywall and not inside against the plate
because you need a hole deep enough for the shelf to sit down to the drywall.
And then I like to bring it back, oh, like an eighth of an inch.
So it's an eighth of an inch longer than it needs to be.
Just so you have plenty of room
and you know you're going to have enough room for that bracket to slide in there.
We got our doweling jig on there.
We got our drill bit marked off so we're ready to drill our hole.
Another key here is a little thing I like to call the foot clamp.
I like to put the shelf on the ground and use my feety feet
to hold it in place while I make my drilling.
Now you might be saying to yourself,
well wait a second, you marked the depth of the drill bit for the shelf
but you got this extra added room from the doweling jig.
And you're absolutely right.
You got to start with the doweling jig but now you got a nice pre-drilled hole
so you can finish off the last little bit just with the drill.
So now our hole is the right size, it's the right depth
but there's one last step that I personally like to do
because it makes the install way easier.
I like to put the drill back in there
and I like to rack it back and forth just a hair to open the hole just a little bit.
Now this isn't opening the hole all the way down.
When you rack the drill bit back and forth it's just expanding it right at the start.
It just helps you get it started when you start to mount it on those brackets on the wall.
So that's one all drilled.
Now we got to set up the doweling jig, do the other one.
All right, so now for the moment of truth.
Now it's important to know that you don't need to glue these onto the shelf.
You don't need to put caulking in there or anything like that.
Lots of people think they do to hold the shelf in place
but surprisingly friction alone is going to hold it super tight.
The other thing is if you glue it in place
you're never going to be able to get the shelf off if you want to remove it.
The only way you're going to be able to get it off is to cut it off.
So just bang it on there.
The holes are going to do their thing.
The other thing you might need is a mallet.
Don't be surprised if you got to beat on it a little bit to get it in place
especially at the start.
Once it gets closer to the end where you marked your holes
should slide right in there but bang away my friend.
This is always the trickiest part getting your holes
especially getting that first one started.
So get one started then get your other one started.
Look at that.
Didn't even need the mallet.
All right, well you remembered what this shelf looked like before.
It was pretty sad.
It was drooping.
You can move it around.
It's still going to have a little bit of flex to it.
That's okay.
Your round stock is going to have some give to it
but it's not going to go anywhere.
You can't tell but my feet aren't on the ground.
Super sturdy.
You can pile anything you want on there.
If this was going to be in a kitchen where it was going to have dishes
and lots of stuff like that
I might throw another bracket in there just to be safe.
You probably wouldn't need it.
The other thing is if it was wider you're just going to want longer brackets
but those can be made.
Like I said these are the brackets I like to use.
Half inch round stock welded to a quarter inch plate of steel.
They sell these online.
I will try and find a link and put it in the description.
I know there's a company out there that makes something exactly like this.
If you can't find it online find a local steel guy.
They can make these up in like two seconds.
I think I pay my guy $20-$25 for a set of brackets.
Not bad at all when you're thinking about the cost of a full floating shelf
and you're going to be super happy with the results.
That's how I do it.
Floating shelves.
Box shelves.
Hope you get a lot out of this.
Please subscribe to my channel.
Comment below.
Ask me your questions.
Hey!
Thanks for watching that video.
I hope it was helpful.
I hope you learned something.
If you want to see more videos like this please subscribe down below right there.
It would really help me out.
And leave a comment.
Tell me what you liked, didn't like.
It's all good.
It's an open forum.
I might say something rude back.
If you say something rude to me I kind of like to banter that way.
But still, subscribe.
