How to Faux Paint | Clock Update | Modern Farmhouse Decor | Paint Tutorial

Dawn Renee's Designs
8 followers
2 Video Views·Oct 29, 2022
Hey guys, today I want to share with you how I'm going to update this clack. When I bought it I
really liked the face of the clack. I liked the colors, I liked the design, but what I didn't like
is this dark gray and so I'm planning on updating this with a lighter brighter finish with some
paint. First thing I'm going to do is turn it over and try to remove this part of the clack
and then I'm also going to just clean the outer edge. I'm going to use TSP. Again, whenever you're
doing something like this you can just use whatever you have. You basically just want to
get any dirt off of it, any grease, anything like that off of it so that your paint adheres to it
well. So let's get going. So this is the first layer of paint that I'm going to put on here. This
is going to be my base layer and this is like a lighter gray and this is by a company that is no
longer in business. It's just something that I have. I've had this for years quite honestly. So
you can just use any kind of chalk paint. This is a chalk paint so I'm just going to go ahead
and apply this and I'm going to do this in motions where I want to create peaks and valleys
because I'm going to put a different color on top of it. So I'm not really trying to get
a perfectly smooth finish at this point, just going back and forth and getting full coverage.
When I took the clock apart I realized that all of this inside is going to show. So I've got
the other piece off to the side drying and what I'm going to do now, because I'm going to have to paint
the inside here as well, is I'm going to tape off all of the clock face along the edge so that I can
keep a clean edge there. I'm going to use this green tape and what I'm going to try to do,
we'll see how this goes. It's kind of the thing you don't want to have to do with clocks but
is I'm going to try my best to, I guess I'm going to have to use work in small pieces,
have an edge that I can have up and the reason why I want to do that, like right here this is up,
the reason why I want to do that is so that when it comes time for me to remove
this paint that I will be pulling away from the center so that hopefully I don't take off any
anything from the face of the clock. So that's what I'm going to do now. I'm going to tape it
off. I've already cleaned it all just like I cleaned the other piece and then once I get
all this taped off I'm going to go ahead and paint this inside lip as well.
So
so
this gray paint is dry so I'm going to go ahead and put on the next color that I'm going to use.
I was really hoping that I could find a white but I did not have anything in white and chalk paint.
I have again this old chalk paint that I've had forever by a company that isn't even a business
anymore. It's called Country Whisper and it's really kind of a light taupey tan so I'm going
to go ahead and put this on just in the same way that I did the other still trying to create some
texture. I'm basically going to do it in the same way that I did it before and I'm trying to get a
really good coverage. There's no right way or wrong way of doing this when you're trying to
paint in this way. Just however you can get it on there and create texture and get full coverage.
So
everything is pretty dry so now I'm going to take some really fine grit sandpaper. This is
what I have. It's 220 and I'm just going to lightly go over everything. I don't, if I can
help it, I don't want that really dark that we started with to pull through but what I am looking
for is a little bit of that gray that we put in as the bottom layer. I want a little bit of that
to show through and so that is the look that I'm going for. So I'm just going to start gently
sanding and because I'm impatient I went and I found some heavier grit sandpaper because I want
just a little bit of the gray peeking through. I'm going to have to be really careful with this.
If I was more patient I would just use that finer grit paper but the reality is I'm not. So let's
go ahead and give this a try. So as you can see I got a little crazy with the sandpaper and it
pretty much took a piece of it off. So all I'm going to do to fix that is just put a little bit
more paint on there, let it dry and it'll be fine. I'm going to finish sanding first.
I really like how this has turned out. I got it all cleaned up, got all the sand stuff off from it
but I feel like I just want to take it to another level. Just give it a little more texture or a
little more dimension. I really wanted the white like I had mentioned earlier and I don't have any
white paint but I did find this white glaze again something I've had forever. So I'm going to just
use a chip brush and apply it and I'll try to zoom in so that you can see what it looks like
because it's going to be very subtle but it's going to be what we need just to take it to that
next level. I'm just going to take a little bit of it on my chip brush and I'm going to
dab off a lot of it and then let's see if I can get it up close. I'm just going to go over all of
it. I don't know if you can see that or not but it just gives it another little dimension
and I'm going to do that over the whole thing. Guys I am so glad that I added that glaze onto
there and I don't know if you can tell from the lighting but it just added a layer of
prettiness to this. That's all the best way I can describe it. It's just so pretty and again you
don't want to put on a full layer. I just used this chip brush and you just want to go over it
really really light. You don't want to put on a whole thick layer and again it was just
white glaze. Okay so now I just need to get this all put back together and we'll see what
it looks like together. Here it is all finished. Man what an amazing transformation. So I hope that
you found some inspiration on maybe some items that you have around your house that you could
give an update to. Thanks for watching and I'll see you next time.
