Hey everyone, Michael here! With 25 years of barbering experience under my belt, in this tutorial I'm walking you through how to create a clean, classic taper fade for a sharp, professional look. I start off with basic clipper work using a simple curving "C motion" around the base of the neck to set up a smooth weight line, and then use scissor-over-comb techniques to seamlessly blend the sides into the top while keeping the ears and fringe protected. Next, we'll keep enough length on top so the hair can sweep back naturally, trim away any damaged ends, and use a high-speed hair dryer before doing a quick dry "polishing" pass with scissors and detail trimmers to really make that taper pop. To wrap it up, I'll show you how to take away any fluffiness and style it using a little bit of wax pomade worked through with a wide-tooth comb or just your fingers for a sleek finish
Join this channel to get access to perks: / @theoneminutebarber
0:00 - Welcome and Introduction 0:06 - Clipper Base Work (6 mm / #2 Guard) 0:44 - Lower Hairline Taper (3 mm / #1 Guard) 1:19 - Framing the Neckline 2:13 - Scissor-Over-Comb Technique (Back & Sides) 3:53 - Left Side Blending and Ear Safety 5:34 - Blending Front to Back 7:21 - Connecting Top Length to Sides 8:57 - Trimming Split Ends and Squaring Top 9:52 - Blow Drying with High-Speed Dryer 10:14 - Dry Scissor Polishing Pass 11:04 - Detail Trimmer Work and Hairline Refinement 11:57 - Styling with Wax Pomade andPompadour Comb
AI Generated·May contain errors
Video Summary
AI Generated
Professional barber Michael provides a comprehensive tutorial on achieving a classic tapered haircut. The process combines precise clipper work for the base, scissor-over-comb techniques for blending and shaping, and a polished finish using a high-speed dryer and pomade to ensure a clean, business-like appearance.
Welcome to this step-by-step tutorial.
My name's Michael, I've been a barber for 25 years.
Let's get started. I'm going to move
my clipper position to six millimeters,
but if you're using a clipper with plastic guards,
that would be the number two guard.
So starting right at the very base of the neck,
I want you to go in and upwards
whilst curving the clipper around your thumb.
a C motion, but you can see the method here.
So up and away, some people call it.
I don't want to go right up the head because
what I want to make here is a tapered finish on this haircut.
So up and glide away as you
move further up the head.
You can see this line of weight is getting left around the
back of the head and with a clipper and curve away.
Now that I've covered that, I'm going
to go back to the three mil position.
So that would be a number one if you have plastic
And I'm not going to go up quite as high.
If you look at my motion here,
I'm just skipping the edge of the hairline.
So just in a little and just curve out,
nowhere near as high as I was going before.
So on the sides, let's go back to that six mil,
the number two. And we only really want to attack the very,
very edge, just marginally higher than
the ear in this area. And then back with that three mil again,
which would be your number one.
If you have plastic guards.
Someone asked me recently, what's my opinion on the Westech?
That's this clipper I'm using. Well, I quite like it.
The fact that it has so much range on
the metal blade means I don't have to go back
and forwards looking for plastic guards. So I
do like it. So the three mil again.
So we've done both sides. Now let's just edge up here.
What I like to do is not go right round and curve the neckline.
What I want to do is just go straight down
as if I'm going to even go right
down the back but I'm not going to go that far.
I just want to make a straight line which will act like a frame
for the taper. Now we're going to scissor cut all this shortly but
let's just clear this up a little bit.
That straight line I think is really
important if you're going to make a taper
because it makes it pop, it makes that tapered effect
Stand out more.
So, scissor cutting.
I'm gonna grab my trusty seven inch Bladonia,
Japanese steel scissors,
and we're gonna do scissor over comb.
Now we want all the hair to fall down
around about where we've got that weight line.
We need enough length to reach down.
That's the overall goal here.
So slide the scissor in,
place the comb underneath and cut across the spine.
I think I've got enough hair here to just reach down.
towards that bulge at the back of the head, the occipital bone area.
It really helps if you have a
long scissor for this. A seven inch is ideal.
Six inch would be fine as well. If you're doing this
technique with a smaller scissor, it's a little bit harder.
But you can see as I get to the bottom,
I'm not taking much off down there.
That's where my clipper work was. Let's move over
to the right hand side and you can see the shape here.
I'm pulling out further higher up.
And you'll notice as I get down,
lowering down towards that tapered area,
the clipper work, I'm going to start taking less and less off.
So the scissor goes in, keep the scissor closed
as you slide it into your section.
And as you work your way down,
catch it with a comb and cut across the comb.
I'm showing you this angle
so you can see how far I'm pulling the hair out.
So let's step over to the left hand side now.
And you can see I'm going in with the scissor.
But in this direction because I want
to work my way down to the hairline there.
Now I didn't go up that far with the clipper
so everything here needs to be cut.
I'm just going to get slightly shorter as I get closer towards the ear.
So shorter and shorter.
Now the ear needs special attention
so as we work our way down we need to be very careful
because the ear is susceptible,
it sticks out and we're working scissor over comb.
I'll show you how to keep it safe.
There's my guideline.
So I can see the hair that I'm cutting above
and every time I move down I can see that little guide in there.
Now as I get closer to the ear,
I want to leave the plastic on top of the ear.
We want to keep that ear safe, okay,
so plastic on top and then cut across the spine of the comb.
Right, we want to keep the bangs safe,
the fringe safe as we get towards the front, so
I'm only going to go as far as that line there
and I'll keep the fringe out of it at the moment
because we don't want to cut that hair.
We'll leave that until later. I'm going to show you
I'm going to show you how to deal with that.
Let's just work our way down to where that six mil,
the number two length was that I cut with
the clipper. Just get that fringe out of the way.
Now I can neaten this up a little bit.
I'm going to just get all the way to the front.
You can see that there's a bit of a heavy line
there at the moment and I'm going to deal with that little by little.
Just take small amounts
off and then what I'm doing here is I'm smoothing over.
I'm just taking absolute dust, hardly
Hardly anything working my way up until it looks smooth.
Now it might not look it.
Entirely right now because some of it's wet some
of it's dry, but when it's all dry
You're gonna see exactly how it sits, but I like the flow of that.
Let's move the top out of the way
I'm gonna go in a different direction here
I'm gonna work from the front of the head towards the back here
So in this way and then remember we want all
that hair to be condensed around that weight line
So scissor in, comb underneath, catch it with the comb
You all know this is my favorite technique.
I love to cut like this and you should practice it.
Just make sure you keep that scissor closed.
Like I said before, this scissor is my own scissor and
it's available right here on YouTube in my online store.
So if you're looking for a high quality
Japanese steel 440C, this is it right here.
So just work my way down again.
Now this is me working at full speed here.
You can actually go much slower if you want,
if you're not comfortable with this speed. And I'm checking the flow.
It looks like I've got good movement
because we want to retain that movement.
So from the front towards the back,
I need to join it in and I'll come to a
point where there's not a lot of hair left to cut
because I've already been over it.
As you get that down towards the back
of the ear there, just pull it down,
make sure there's no hair sticking out beyond
the hairline and just trim that away.
I'll come back with the little trimmer yet again later
to really refine this.
So I'm just getting right over,
I'm trying to find where I was cutting.
Start with the scissors and I think I've got it.
Now on top, we don't really want to take much off the top.
What we want to do is we want the hair on top to reach
Right across towards the weight line that I was building up.
So it should look something like this there's long hair
and there's hair I've already cut
and I want to join the long hair in to the shorter hair
so that hair from the middle let's pull it all
over to the side
and this is how far we want it to reach right this hair here hair here
Here
is coming all the way across to the side
from the middle that's the kind of length that we want.
Because when the haircut's finished we want to brush it back
we
and we want it to like fall to the
side. You want enough length that it can actually reach over there.
I'm picking this up with my
go.
fingers now as opposed to the technique
that you saw me use at the start because as the hair gets
longer you do need to put it under some sort of tension.
So I'm following this method all the way to the front
If you've seen me over-directing videos before,
you'll notice I'm not doing that here.
That's fine because I don't want excessive length on the front.
I want it to look really business-like,
you know, like clean, classic look.
So the same at the other side.
Let's just pull the hair all the way out to the side,
and I'm going to cut anything that sticks out,
and anything that doesn't, I'm not going to go looking for.
So both sides are completed there, but there is like split ends on top.
There's hair that needs to be evened up,
there always is, hair grows at different rates,
it gets damaged, maybe you go to the swimming pool a lot
or you wear caps or whatever. So
what I'm going to do is I'm going to just pick sections up
from the front to the back and I'm
not really looking to take any major length off,
I just want to square the ends off so that I have a
good solid section, a nice clean section
and it's not been like damaged, thinned out. So what am I
What am I taking here?
Like maybe a centimeter, something like that.
Hair grows about half an inch a month
so a centimeter is only going to bring you back
a little bit. So when you do these haircuts especially
in men's hair as it's getting longer
you can find that the ends can be a little bit split
or broken because it's starting to get long
enough that it's out in the open out in the world
that long that it can be damaged. When drying off
I like to use this high speed dryer now it looks like
a conventional hair dryer but
There really is two types of hairdryer in the world.
There's the high speed dryer and there's the standard hairdryer.
But when you want hair to flow back,
having the force of a high speed dryer,
I find it really helps. So I like to use a high speed dryer.
With it dry, I'm going back
to my trusty Bladonia 7 inch Japanese steel.
And I'm going to polish. This is what I call polishing.
So I move the comb and the scissor together,
just up through the hair. And I'm looking to take off
Just dust. Just absolute dust. Barely anything at all.
And all it's doing is it's just cleaning it all up.
This is important for the end.
We want the whole finish of this haircut to look totally polished.
Now, if you're learning, by the way,
and you want to know more about haircutting from me,
I've got lots of master classes in the member section,
there's also basic videos over there
and if you become a member and you help to support the channel you'll
also get early access to any
videos that I put out
and the chance to see these haircuts unedited before everybody else.
So little trimmer work again around the edges,
I'm just tidying up around the ear, see how I used the
comb to just flip the hair out there?
So watch this, comb goes in and I just flip the hair out
I cut along there. Now all I'm looking
to do is make sure that there's no
little hairs sticking out beyond the hairline because this frame
up and down the sides, the neater that is,
the more that the tapered effect pops
in my opinion. So I'm just trying
to get it as clean as possible.
Don't be afraid to spend as much time as you want there.
Now I've got this big wide tooth comb. It's a
pompadour comb but any wide tooth comb leaves a really cool texture.
What do you think is wrong with this so far? For me,
It looks a little bit too fluffy
so first thing I just want to make sure that there's
no like really rough edge just in the fringe here I want
to pull that down and make sure
I've got everything there but you can see how kind of like
dry and fluffy it is I keep saying that word fluffy.
So what I'm going to do is I'm going to use a little bit of pomade,
just really light kind of
like wax pomade and just work that through.
And what it'll do is it'll weigh down any like flyaway
hair. I don't want the hair to be caked.
I don't want like a really glossy, thick, oily look. Just
enough to add a bit of weight. And you can see that there.
Now, no wide tooth comb, no problem
because your fingers make the most amazing wide tooth comb.
Well I hope you've enjoyed this video and this tutorial,
hit me with any questions,
I'll see you in my next video.