Gimbal Stabilized Camera Dog Mount

Rainfall Projects
6 followers
2 Video Views·Oct 29, 2022
I've gotten quite a few comments on past videos suggesting I put a camera on my dog Drake.
While I appreciate every comment I get, I never took them too seriously because I've
seen footage from dog cameras and it's always a shaky mess and isn't much fun to watch.
But then recently my dad also suggested I do this, which made the idea seem a little
more credible for some reason.
And it kind of got the wheels turning in my head of how I would do it if I did do it.
If I was going to do it, I wanted to do it right.
Drake's never worn a vest before, so I had no idea how he was going to react.
He didn't seem too fussed.
After doing some research, I saw that DJI, which is the company that feed my drone, also
makes a handheld gimbal for cell phones, and I thought this just might be the ticket.
If I could build a bracket to mount the gimbal on that attached to a vest Drake was wearing,
I thought it would be my best chance of producing some watchable footage.
While the battery charged on the stabilizer, I went out and threw the stick for Drake to
make sure he was going to be able to run and get used to wearing the vest.
He immediately went into lock-down mode and wouldn't budge, which I've never seen him
do before.
He lives for fetching that stick, so if he's not chasing it, there's something wrong.
The vest was a little bit bigger than I thought it was going to be anyways, and didn't fit
him all that well, so I ended up sending him back and ordering a different one.
A couple days later, a new one arrived, and I was a little more optimistic about it.
The straps on this one went more around his chest, whereas on the last one they went around
his stomach, which I thought would let the vest rotate too much when I put the top-heavy
camera on it.
He didn't seem to mind this one as much, and when I went to throw the ball for him,
he actually ran around a little bit this time, didn't go into lock-down mode, but I don't
know, maybe he's also just starting to accept his new life of indentured servitude as a
24-7 cameraman, I mean camera dog, and realizing he might as well make the most of it.
I wanted the brackets that hold the gimbal to be as light as possible, so I decided to
make them out of aluminum.
I thought this would also be a good opportunity to practice my aluminum welding, which isn't
very good.
I cut a 1-inch strip into a couple pieces, and tried to bend them to match the shape
of Drake's back.
I just haven't worked with aluminum very much, and it definitely behaved a lot different
than mild steel does.
The 1-inch strips fit really snugly into the new vest, which worked out perfect.
I was kind of wondering how I was going to hold them in place, but it was a tight enough
fit that they just really held themselves in place.
The vest is starting to look like a saddle now, like a picture of a little monkey riding
on this thing.
Maybe that's what I should get Drake for Christmas, a monkey companion.
I thought if I mounted these cross pieces tight up against the Velcro straps on the
vest, then the bracket couldn't slough off to the side, and it would definitely keep
it on top.
I drilled out some 1-1⁄4-inch holes for the bolts, and countersunk the back side so
that the bolt would sit flush inside the metal strip.
I felt like it was time for another fit check on Drake, make sure everything was going to
work alright.
Okay, now I just have to figure out how to mount the gimbal.
GoPro also has a gimbal made for its newest camera, the Hero 5, and I thought a lot about
going that way, but I decided to go with the DJI because I kind of like the option of being
able to use it with my cell phone as well, and I don't have the newest GoPro camera,
so I would have had to use an adapter, and I just didn't think it was going to work quite
as well for this weird specific situation.
I cut and bent another piece of 1-inch strip to match the radius of the gimbal handle.
The gimbal also has a mounting point up higher on the handle with just a standard 1⁄4-inch
bolt threads, and so I thought I would run another strip up there that I could bolt into
the side of the handle, and I would weld it to this bottom piece.
Oh man, time for the aluminum molding.
Patience Justin, patience.
After a little bit of practice on a scrap piece, I figured it was time to move on to
the real thing.
It wasn't pretty, but I think it was going to hold.
Pretty low risk factor here if it doesn't hold.
I'm really glad I wasn't welding on a boat that needs to be watertight or a race car
frame or something like that.
Just Drake's camera.
I wanted to keep the gimbal as low as possible, which meant I needed to tilt it backwards
like this, and I also wanted to mount it so it got the back of Drake's head in the
shot, which I thought would make it a little bit more interesting and give it some perspective.
The stabilizer works amazingly well.
When you twist it, it slows down the rotation so it's not as jarring, and it also just keeps
it really stable and takes out any bumps or shakes.
But it's obviously meant for a person to hold in their hand when they're using it, and I
think your arm is kind of naturally a stabilizer, so I really didn't know what to expect having
this thing mounted on Drake.
I did want to use my GoPro instead of my iPhone to record because I think it's a little bit
better video quality, and it's got a nice wide view on it.
So I tried to make a mounting bracket to hold the GoPro off to the side, but I realized
it's a little more complicated than it looks because it has to keep the gimbal balanced,
and there has to be a lot of weight to one side to counteract the weight of the camera.
I looked on Amazon, and sure enough, there was already a cheap bracket specifically designed
for this, so I just went ahead and bit the bullet and bought it.
The gimbal has a little bit of adjustment in it, and sliding the arm all the way outward
left it nice and balanced.
The last thing I wanted to do was to mount a shotgun microphone on Drake's camera rig.
I just think GoPro's audio is terrible, and if I'm going this far, I might as well go
all the way and try to get some good audio with it as well.
This is also why I didn't go with the GoPro stabilizer, because you can't use an external
microphone with it.
I got the microphone bolted down, and then ran the mic cord up to the side of the GoPro,
which plugs in using an adapter.
After tightening down a couple zip ties to keep the mic cord in place, this slightly
ridiculous project was done, and ready to go on Drake.
Come here.
Come here, Drake.
I'll be the first to admit that it probably wasn't the best use of my money, but it was
fun working with Drake, and it's something totally different than I've ever done before.
Yeah, I bought most of the components for this project, which I usually pride myself
in doing the opposite, but it was still a challenge for me figuring out how they would
all fit and work together.
I've never made anything that's meant to be worn, especially by a dog, which made me think
a little differently.
I couldn't sink any leg screws into Drake to fasten things down, and I couldn't weld
anything to him either, but it really seemed like the camera was staying put, and he got
used to it a lot faster than I thought he would.
It cracks me up that Drake has no idea what this new thing on his back is.
He just puts it out of his mind and gets back to loving life as a farm dog, just like he
always has.
Thanks for watching.
Just kidding.
Here's a montage filmed entirely by Drake.
