Dragunov SVD (Chinese Type 85/NDM86) - Cold War Sniper Perfection

Sunday Enjoy
2 followers
17 Video ViewsยทDec 17, 2024
This episode was brought to you by Slate Black Industries.
For M-LOK grips and accessories, visit slateblackindustries.com
For five years, Yevgeny Dragunov would design the sniper rifle that would bear his name one day.
The Soviets kept the design a close hold.
Decades as a Cold War progressed,
this was considered one of the most technologically advanced sniper weapon systems.
And then the Chinese captured some.
Cloned them, and armed their own snipers.
Welcome to Ninehole Reviews.
Today we talk about the Dragunov SVD, the PS-01 Scope,
and we'll even demonstrate the IR source detection
and the differences between the Chinese and the Russian SVD.
Make no mistake, the SVD Dragunov is the Cold War icon that we consider
as one of the most well-designed marksman's rifles produced.
Although the original SVD is outdated by today's standard,
there is still many aspects of the Dragunov that make it a highly effective marksman's rifle.
Take note that in this video we will refer to the term as sniper under Soviet doctrine,
which is closer to the current NATO doctrine of the designated marksman.
We are fully aware that there will be viewers who for some reason get
personally offended by a .308 SVD copy,
and I wish you all the courage in telling us off in the comments section.
Stepping into the 50s, Mr. Yevgeny Dragunov, a weapons designer who was also a sports shooter,
would develop the next generation of Soviet sniper rifles.
The Soviet army has had decades of effective sniper doctrine in deployment at this point.
Post-World War II, they had the Mosin-Nagant M91-30PU sniper,
and the Tokarev SVT-40 sniper.
While the SVT-40 delivered less accuracy than the Mosin-PU sniper,
the Soviet army recognised the semi-automatic sniper's usefulness in supporting infantry units
and the developed sniper doctrine.
There was a need for a new sniper rifle that was light, accurate, semi-auto, rugged,
and easy to maintain.
In short, they wanted it all.
After fierce evaluation, the sniper rifle Dragunov system of year 1963
was officially put in production in Izhmash.
Typically, sniper rifles were developed from a base system.
The SVD, however, was a ground-up design,
specifically designed as a semi-automatic sniper rifle.
It was an extremely lightweight, short-stroke piston tappet system
that was versatile enough to just strip the scope and the cheekpiece off
if the soldier needed to fight in close quarters.
No tools were required to field strip and maintain the SVD.
The rifle strips with an SKS-style rear latch,
and the dust cover comes off like a Kalashnikov.
One will also notice a rotating three-lug bolt slides right out of the carrier,
but there is no piston attached to the carrier like a Kalashnikov.
Note that the gas block is also adjustable for gassing with the cartridge,
and the tip of the cartridge assists with the handguard disassembly.
The action rod and the piston are then simply pressed out.
Shortly after first production, the Russian military requested Dragunov
to shorten the barrel twist from 1 in 320mm to 1 in 240mm
to accommodate a heavier and longer AP incendiary or specialty round.
While the barrel twist decreases the rifle's accuracy
with the standard 7N1 151-grain sniper ammunition,
being able to use explosive projectiles
have been a devastating part of the Soviet sniper's doctrine in World War II.
The Chinese and Soviets were no longer communist friends in the 60s.
With the political differences,
the Soviets did not send any tactical data packages to China
on the SVD like they did for the AK, SKS and RPD.
The Chinese SVD actually came about from the PLA capturing SVDs
the USSR supplied the Vietnamese during the brutal Sino-Vietnamese War in 1979.
And then the Chinese reverse engineered the SVDs into the Type 79s.
Now the Chinese have a reputation of being very talented at reverse engineering.
In order to put this conspiracy to rest,
I went to my friends at Collectors Firearms
who have one of the largest firearms collections in the country,
and I asked them for help.
Hey!
Yeah?
I need your Tiger.
This one?
Spasiba.
So we'll look at the Chinese Dragunov,
and this is a commercial Russian Tiger Dragunov.
We'll compare some of the internals and see how they fit together.
Let's start stripping it down a little more to see what we get.
Well, this might get it.
We observe very tight tolerances between certain parts
between the Chinese and the Russian variety.
However, due to changes in the fire control group,
the Chinese and Russian parts don't all interchange.
And this here is the Russian carrier with the Chinese bolts installed.
And it does not go in.
Now this is the Russian bolt in the Chinese carrier.
And it works!
Typically, caliber conversions for similar dimension casings
involve switching out a new barrel,
a bolt with a different bolt face,
magazine and magwell cut,
and not the bulk carrier.
The carrier should be the same between similar dimension adaptations
from .54 rim to .308.
The Vepr in .54 rim to .308 is like this.
7.62 Soviet AR-15s are also like this.
If you have a Chinese NDM-86 in .54 rim,
we invite you to measure your bolt channel
to see if it matches our dimensions here.
Post it into the comments section.
Although not all parts are interchangeable,
it is hard to turn away from how the Chinese were able
to mass-produce a reverse-engineered rifle
with tolerances this close to Russian spec.
Consider that the Iranians actually then reverse-engineer the Chinese clone
to make their illegal copy of an illegally copied SVD,
calling it the Nakhir-3.
Later on, the Type 85 would make an update on the barrel twist
to 1 in 315 mm,
which ironically almost has the same exact barrel twist
as the original design that Dragunov had
to accommodate the 150 grain sniper ammunition.
We took the rifle out for a series of tests.
When we shot the rifle on a practical accuracy course,
we were able to achieve some very impressive results
until we reached 800,
where the rifle stopped maintaining at zero.
With Black Hill's 175 grain Sierra Matchking .308,
we took it back to do a heat test,
where we shot the rifle one shot every 3-4 seconds
to observe the effects of heat on group dispersion.
But indeed, we saw a shift in group size and impact location
as the barrel heated up.
The first 9-hole group measured in at 1.8 inches.
After the first 9 shots,
we saw the group size open up 34% on average
from the 1.8 MOA to the average size 2.4 MOA.
But what's more interesting is the fact that by the 27th round,
the grouping actually shifted left by 1.2 inches,
which could translate to a 10-inch shift to the left at 800 yards.
When we cooled the barrel again,
the NDM-86 was indeed able to achieve another 1.8 MOA 9-shot group,
just like the first test that group.
Finally, since a rifle was designed to have the scope and cheekpiece removed,
and for the operator to run it like a standard infantry rifle if needed,
we had Josh shoot it at close range even though he thought I was insane for asking.
Forward to this report.
This weighs...
This feels like it's like a broom.
Like it's the weight of like a barn broom.
I wasn't bringing it back to the middle of the target,
I was driving it down to the left of the target.
So the recoil on it's pretty darn sharp.
I was shooting it at a speed that I felt like
I could probably keep up with where the recoil was going.
You've got a decent-sized cartridge with a lot of moving internals
and a very, very light overall package, especially with the optic removed.
So the recoil was pretty darn sharp.
Yeah, the grips are beautiful on this gun.
The problem is it's just like slick.
It's slick so you can't...
It's super important for me as I'm shooting to be able to pull
into my shoulder to help mitigate recoil,
but as you can see,
I just slide right down the grip.
So if I had to utilize this in a close-range role,
albeit certainly not ideal under basically any situation,
I would much rather have a setup like this than say a bolt-action style firearm.
I might even leave the optic on and just shoot both eyes open,
trying to utilize the reticle through my right eye
and kind of seeing the vision down with my left,
similar to how you might even shoot a red dot.
As we know, any sniper rifle's performance is a direct reflection of the scope used,
and the Russian PSO-1 scope was one of the most
technologically advanced scopes available of its era.
Though optical clarity is nothing to write home about for modern standards,
but it gets the job done.
The reticle is a simple and yet effective design.
A rangefinder on the side allows the operator to quickly range a target's height
and then dial.
Additional chevrons under the main aiming chevron
is then a bullet drop compensator for 1100, 1200 and 1300 meters.
And the wind hold-off hashes are beyond easy to use when shooting in high wind conditions.
Under low light conditions, the shooter can illuminate the reticle, as seen here.
Some PSO-1 scopes also have solar rechargeable cells up top for their infrared detection filters.
The cell is positioned to where the scope would automatically recharge
during daylight operations.
After roughly a two-hour charge,
the soldier is then able to flip up the internal infrared filter.
This detects any infrared light sources emitted by or for night vision devices.
We tested this function with an infrared floodlight
and found that these scopes indeed can aim at infrared sources.
With the illuminated reticle and the infrared sensor,
the rifle is potentially able to eliminate targets
at the 100 to 200 meter distances as long as they have an infrared light source.
To put this into perspective,
while Dragunov was designing the SVD,
America was putting this contraption together where the battery was the size of a rucksack
and could explode if it got wet,
with a cartridge with a max effective range of 270 meters.
While the West was busy trying to turn failed infantry rifles into sniper rifles,
the elegantly designed SVD was deployed to far-flung corners in the world
as a sufficiently accurate, lightweight, rugged, dependable
and technologically advanced sniper rifle.
The SVD fulfilled exactly what it was required to do,
taking out torso-sized targets at varying distances,
varying weather and light conditions.
The SVD should not be taken lightly.
We'd like to thank our viewer Matt for loaning us this Mint NDM-86.
It is an exceedingly rare opportunity to see these rifles in the US
and we even got to fire the first shot.
And you can see that this rifle did not have a speck of soot in it before.
Thank you Matt for making this happen,
and for everybody else, thank you for tuning in and we'll see you on the range.
1-6, 15-9-2, 1-Victor, 2-Fax, recon 1, over.
