Construction Glue (Collall Clear All Purpose) https://amzn.to/4iU9RTt Beacon 3 in 1 is very similar and more available in the US, Canada, and Australia.
Disclaimer Some of the product links used are affiliated; these do not cost you extra, but by using them, I will receive a small % of the sales, which will help me continue bringing you great YouTube tutorials. Thank you all for your support. Sam
AI Generated·May contain errors
Video Summary
AI Generated
This tutorial demonstrates how to create a 3D \"eyeball\" gift box for Halloween. Using a specific template and scoring measurements, the creator shows how to construct an orb-shaped container perfectly sized for a Terry's Chocolate Orange, then details how to decorate it with layered paper circles to achieve a spooky eye effect.
Hey everyone, Sam here and I'm back
with another fun Halloween tutorial and this time I've gone
back to the orb boxes and I made these I think eight years ago.
I've got lots of different sizes
but I thought what else could I turn them into?
for Halloween and I thought an eyeball
so that's what we've got here you can
turn into a pumpkin I've done that already
a few years ago it was orange foliage looked really really cool
but I think for Christmas these would look nice
as little Christmas puddings
so brown card you could do some white kind
of icing detail on top I think that
would look really sweet but you can see I've got these eyeballs it's
very easy to make you don't need any dyes to do this
and these hold perfectly with the measurements that I've done
a Terry's chocolate orange
but of course you could fill this with other treats as well
I mean that alone, you disguise this sticker,
add some green paper foliage on top, you've got an instant pumpkin.
So these are always good at Halloween and autumn time.
So let's get started and I'll show you how to make it.
So I've created a template here for you.
So if you want to take a screenshot of that and then you can revert
to this each time when I'm going through the steps.
But that's how it will cut out.
So I've cut that from a piece of nine and a half by six and a quarter.
I'll use the template in a minute when we do the cutting,
but if you along the nine and a half
inch side at one and one eighth of an inch,
like I said, I have done specific measurements for
this to fit in really nicely.
If you don't have one eighth of an inch increments on your score
board, check out the playlist.
If I remember, I'll put it up here and I'll have the pumpkin one and
I think I've just got the simple festive orb as well,
but there's a few others and you can use those
because I think the measurements
might have been quarter inch increments.
So one and one eighth, two and a quarter,
three and three eighths, four and a half,
five and five eighths, six and three quarters,
seven and seven eighths and nine.
You have a half inch tab on the end.
That half inch tab just rotates
so it's now at the bottom.
And then along this side,
you're going to score at one and one eighth,
two and a quarter, four,
And five and one eighth, OK, and you can see what I've done here.
So starting from the top, put across, miss one, put across, miss one,
put across, miss one, and there's that half inch section.
Do the same.
Just mirror on the opposite side here, so cross, cross, cross, cross.
They're the bits that we're going to now remove.
So fold and burnish all the score lines first
and obviously cut and make up as many as you're going to need.
I like to do batch making so I get all of them cut,
all of them scored, all of them folded and do it all in steps.
Okay, so just snip up all of the score lines to the first score line
and then remove the rectangle from that corner
and then go on this side again, cut up all of those score lines
and remove that section.
And then snip these ones away completely.
Okay, so you'll have something like this.
And then where you've got your half inch section here,
just cut down those two score lines.
And then just cut a little wedge off of each section.
These are gonna be your tabs to stick it together.
But if you keep them separate,
it just means everything folds a little bit better.
Okay, so if I bring the template in now,
now because these squares are one and one eighth of an inch squared,
Finding the centre on the school board, obviously I can't do.
So instead, just eyeball it and it is dead easy to do.
So what we need to do, see we've got the tops of the triangles here,
just need to put a little mark there,
just put a little marker with your tool.
So I'm literally just eyeballing it.
You could, if you wanted to, on that square,
just line it up and just pinch the top
and that will give you the centre.
but you're talking millimeters you don't have
to be that precise especially with the way we're
doing this you can see just
on the ones where we've cut away above and then flip it around
and do the same we just you can see how quickly i'm doing it just want
to get it in the middle
of that one inch okay we'll put a ruler there
and just roughly in the middle it's really not
going to make too much of a difference
and then with your ruler you want to score
these here so you're scoring from the little marker down
to the bottom left and right of each
of those squares the left and the right just score
so you've got all of these sections okay so now
i've got something like this so that now looks exactly
the same as the template then with these
you just want to fold them over towards you
so just lift each one up just putting my finger there
You just want to create valley folds on all of those triangles.
I think I've got an orb playlist.
I will have a look. I'm pretty sure I've done one
because I've done lots of different sizes. I've
done more oval shaped ones.
I've done boxes and then the top of the box has just got this kind of
So again, if I remember,
I'm terrible for adding the playlists in, but if not, just put in
orb gift box and then write mixed up craft after in YouTube
and it will bring up my tutorials.
That goes for anything.
If you're trying to search something that I've done before,
just put what you think it's called and then
mixed up craft and then it'll bring up all,
you know, anything that's like a similar match.
Okay. So already when you, you know,
you have it,
you should feel that it's starting to get a bit of a curve.
So next you want to add your glue to the three tabs and then fold,
I've just got two sides folded
over there and then two sides of this side
and that will all line up and just fold it right and
then we'll start with the bottom.
So you're going to work with your opposites so if we just bring
around like this so this one will sit will attach the one opposite
and this one and they're going
to stick and go over the top
and when you bring it all together you get that really cool
Just look at your squares
and make sure that you've taken all the square lines off.
Can you see that one there? I've got a really messy edge.
I'm just going to snip down there and just go around,
just check that they're nice and straight.
Use a ruler, just pop it underneath
and then when you go to stick them down,
you've got a nice surface to be able to push against
and just make sure the squares perfectly line up.
OK, and then I'm going to add glue over there.
that one down and you'll see it will start to pull itself in as well,
which is what you want.
So I'm completely sealing this so the
recipient will have to rip it open.
But I have made ones where I've punched
a hole through all of these layers and
it's got a little piece of ribbon so you can hang it on like a tree.
I've also done ones with hook and loop.
You could add a magnet in there if you wanted to.
There's, you know, different ways that you can close this.
Then flip the whole thing over, open it up.
You see it looks really cool inside and then just
Add a bit of pressure there and just make sure that's all secure
and then add your chocolate
orange and I'm glad because that's the last one
and I can't eat it and then we're going to seal
off this end. So I am going to do I think
these again with the Christmas puddings. I'm just
wondering if I've already done it now.
It's been a while since I've done my 3D make so I need to go
back and check what I've done.
So I'm going to be doing my Christmas series this year and then
add your glue onto the next one and then the last one.
Okay, so I've got my circle dies here.
I'll just give you the diameters of the circles that I've cut out.
So for the main eyeball, this is a two inch diameter.
Cut it again in black for your, I guess, what would you call this?
Eyelids?
Yeah, your eyelids.
And that's again, yeah, two inches.
Which is then for the...
Coloured part that is about one and a quarter diameter
and then for the pupil that is three
quarters yeah about three quarters that's just using
a gel pen to highlight and then for the
eyelash it's optional so you might not want
to do it without still looks really good that one
reminds me of Monsters Inc as well
which some of you are probably going to already write in
the comments before I said it
so with this one here all I did is just start from the edge
You want to go thicker as you go around and then thin.
You want to create like a moon
and that's going to go on the top
and you know depending on where you position everything it
changes the expression
so if you maybe made these bigger you could have them going over
this detail here so there's less white it could give you
a different look again. Mine are about
a quarter of an inch thicker
and then again from where you kind of finish that one bring it around
you've got that effect there. Then I've just used some foam pads behind
these just to lift them a little
bit. You can see each one is positioned differently.
So this one, I've got it more in the
centre up towards the top. This one's towards the bottom.
This one's off to the left side. So maybe
this one we will have off to the right there.
And then the pupil, again, I'm going to pop that up
on some foam. And where you position this changes the look.
So if you go right in the middle,
I don't think I've done that actually.
So yeah, right in the middle, you can see.
That looks, or you can hug it towards the bottom,
bottom, you know, left, top, right, the tube.
I think this one, pop it in the middle.
And then, like I said, your highlight.
I'm going to do this one, just a little dot.
So there is our eye.
And then I'm going to add my glue.
You can put foam on this if you wanted to.
You could do two eyes as well.
And that one can sit down.
This is like a one-inch square.
It's just left over from when I made that one.
Okay, and then just cut down.
We've just got lots of little...
You could use vegetable scissors for this.
I've used those lots of times in different crafts all the way along.
It's up to you how thick.
I think this one's a bit thicker than what I've done.
I think I cut it in half.
Yeah.
And then just cut across on an angle.
You can really make this up, to be honest.
I'm going to just then trim off more like three quarters of an inch
and then a slight little angle.
So you've got that kind of flick in the corner of the eye.
Add a little bit of shape.
Add a little bit of glue.
And then just pop that one.
Now, if you've got any white showing through,
which obviously I have got,
just grab a black marker, which is what I did here.
See, I've just gone around the edge like this.
See there, I've got some white.
Just go around.
Obviously careful not to maybe do this
before you stick it down.
And there is our finished eyeball.
So I hope you've enjoyed this fun tutorial.
Like I said, I'll add it to those playlists.
It will definitely be in the Halloween playlist,
which will be coming up now,
which has got tons of other wonderful makes
that I've made over the years.
You could also add some bloodshot eyes to this as well.
So you've got a red pen.
You could add some, you know,
more detail onto these as well.
But I think they look great and the perfect table favour.
So as always, thank you for watching
and I will see you in the next one.