In this video, I'm turning a drawer-less & veneer damaged dumpster find into a super cool, one of a kind cat 'condo'. I had some veneer repairs to do, as well as restoring the walnut veneer on the dresser carcass. For the cat condo portion, I tried to use as much material as possible, utilizing scraps from a cabinet maker, scraps of my own from other projects, a discarded carpet roll, and for the sleeping areas, purchased dining chair cushions from a discount store and made custom pillow covers for them. I was supposed to take part in the Furniture Flipping Pet Challenge (which released on YT last Saturday) hosted by @thekraftycreech and @coloredcaboosecreations .Unfortunately, I missed the challenge and playlist but you can find it on their pages, as well as checking out the winners! I hope you enjoy this transformation. ❤️ #furniturerestoration#vintagefurniture#furnitureflipping#midcenturyfurniture#furnituremakeover#catcondo#upcycledfurniture#catfurniture#dressermakeover#transcendfurnituregallery#furnitureflip#Upcycling#Zerowaste#Diy#Recyclingart
AI Generated·May contain errors
In this video, I'm going to be taking this abandoned carcass
and turning it into a one-of-a-kind piece of furniture.
If you're looking for a tutorial on how
to turn a dresser into a cat condo,
this is not it. This was a challenge
and a struggle the whole way through.
This was supposed to be a part
of a furniture flipping pet challenge that aired last
Saturday, but as some of you guys know,
I was hit with a flu a couple of weeks ago
that really set me back and I ended up missing the deadline for that.
In this video I'm going to be turning this shell
into a one-of-a-kind mid-century modern style
cat condo that pushed every single button I had. Stay tuned.
My name is Angie and I refinish furniture.
Sometimes I paint and sometimes I don't,
but I always do what I can
to save old pieces
So a little history on this piece.
from the trash.
This was listed on, I think it was Kijiji,
which is kind of like the Canadian version of Craigslist,
Welcome to my workroom.
about two years ago, and it was by a man
who ran an apartment building,
and it was found by the dumpster.
There were no drawers in it,
but he felt a little weird about just throwing it away,
so he posted it, I drove and got it,
knowing that eventually someday
I would figure out what to do with it.
As you can probably tell this is a walnut veneer over
a pressed wood on the top and then the sides
are walnut veneer over solid wood.
That's fairly unusual but you'll see why the sides have to be
wood in a few moments.
This piece was made in Canada but I do not know who made it. I haven't
seen this exact style before. It needs a good scrub.
I have no idea what actually happened to
this prior to me picking it up
but I do know that it's been in storage for two years so it's quite
When I first got this I was picturing turning it into like a bookshelf
or a linen cabinet but when
this pet challenge came up this piece popped right into my mind
and I said yes this is what I'm gonna
do with it. But first I need to completely disassemble this inside
and this is a strange
piece in a couple of ways.
I've never seen it put together quite like this. They've actually
mortised out holes for these to fit in.
I've never seen that. Not in mid-century furniture anyway.
It's also a bit unusual how they've attached these rails in the front.
They are also mortised in, and because of the way this trim
is in the front, there's no way to get these out.
These were actually put in as the piece was assembled,
so my only option is to literally cut them out.
Super weird.
What's gonna make this video a little bit unique, or a lot unique,
aside from the fact that I'm making a cat condo,
is that in addition to doing normal furniture
repairs like veneer patching and structurally tuning this up,
I have to implement some
techniques I've never done before.
And every single step along the way was difficult.
And I'm really proud of myself that I went for it
not having done most of these things before but
it's a little terrifying to just share this with the world because
you're watching me do some of this stuff for the very first time.
So step one in this for me was to design what I wanted to do,
what I want this to look like,
and this went through several iterations.
You can see here I initially thought well maybe this little
box with a hole and some slats on the inside.
I ended up removing the slats and putting like a
pillow in there for like a sleeping area
and then maybe a scratching post because you know cats.
And then I was trying to figure out how to do an upper level
because I want there to be an upper sleeping area
and a lower sleeping area and I thought, oh,
I'll put the slats over here, but then I ended up erasing that.
I did know that I wanted this to have exaggerated angles
on the front brace pieces.
Eventually, this little sketch turned into this.
At this point, I didn't really know how I
was going to put all this together,
and I also didn't know if I'd be able
to repair that veneer well enough.
So initially, my plan was to paint the lower portion of the dresser.
I did like the idea of the slats up at the top.
I had planned on building some drawers in this,
some kind of weirdly shaped drawers.
That definitely got left out, but this was a good start.
Like I said, the design changed several times.
I carefully rolled this over onto its side,
one so that I could take the leg assembly off
and have a look at that,
and also to address that veneer at some point.
When I was taking the legs off,
I noticed that most of these pieces
were solid wood with veneer on them,
but that the majority of the veneer had fallen off
or come off in some way.
You might be wondering why they would put
veneer over solid wood. Well, in this case,
the frame of this is not made of walnut,
but the outside veneer is, so of course they want
to match that on the leg assembly.
But okay, so why would they put veneer on the inside?
When you have veneer on one side of solid wood,
it's very important to have veneer on the other
side as well. It balances it out and makes it more stable.
And when you live in Nova Scotia,
or a place like Nova Scotia where it's super, super humid.
Parts of the year and very dry other parts of the year,
having stability in furniture
becomes important.
Wood has a tendency to crack and split with temperature
and humidity changes and that
veneer just sort of holds everything in place
and obviously in this case, along with the
majority of mid-century furniture,
it allows you to have beautiful wood grain on the outside
Without spending a small fortune on a solid walnut.
So like I mentioned, initially I was just going
to fill these with Bondo and paint the lower portion,
but I got looking at it and thought, what if I could save it?
I do a lot of veneer patching and replacing,
so this part isn't difficult for me.
What I'm going to do here is cut away the jagged and broken areas
into crispy lines and smooth shapes.
It's going to make it a lot easier to patch
and a lot easier to match with the wood grain that's above it.
There were these three large sections of veneer
that needed to be replaced, but there were
also a few small ones.
And the tiniest ones I just filled with wood filler,
but this little one over here I actually
used a piece of veneer from one of the torn sections to fill it.
It's always better to use the original veneer where you can.
So if you're cutting an area out of one spot
and you have smaller holes to fill, use that
same veneer.
There are a few different ways to do this.
I find this method is pretty easy
when you have straight lines to deal with.
Basically just trace out the area,
put the tape over the piece of new veneer, cut it
out, glue it in.
I usually like to leave a little bit of overhang
and then cut it off later.
Obviously you want to try to get the best fit possible,
but if you have tiny gaps or areas
where it's not absolutely perfect,
while the glue is still wet,
just rub a little bit of sanding dust into the glue
and it becomes almost like a wood filler.
It's also very important to clamp down your veneer repairs
while the glue is drying.
So this is the piece of veneer that I want
to use to patch the larger areas.
Now you're probably looking at this thinking wow
that's a totally different color.
These pieces were usually finished with a tinted lacquer
so you can see if I scrape it off
it's much closer but I'm gonna have
to do a little bit of color play with that later on.
I'm also paying close attention to lines in the wood.
You want to try to find a piece of
of veneer that closely matches the original grain in the wood.
It's going to give you a much more seamless patch
and you can see with this one here if I follow the lines down
from the original piece onto the new patch that line continues
and it's going to make a much nicer repair.
I need to deal
with the missing veneer
on the leg assembly
so I'm taking it all apart.
It'll also allow me
to easier refinish
the walnut parts.
Obviously you want to make sure to mark pieces like this while you're
taking them apart so that you know exactly where they go back together.
And this is one of the reasons I wanted to take this apart.
If you look on the walnut side, totally fine.
But on the back side where the veneer is missing, it's cracked.
And this is what often happens
when veneer comes off one side of a solid wood veneer sandwich.
The veneer on the remaining side holds tight.
And because wood wants to move,
it's going to move where there's least resistance.
So that's why you can see it is kind of bent,
expanded away from that veneer.
I know there's a bit of a trend among furniture refinishers
of removing veneer from old pieces,
Thank you.
if there's cracks or chips in the veneer.
Rather than replace it or fill it and paint it,
a lot of people will think,
oh I'll just remove this veneer on the top and
refinish the wood that's underneath.
There's a couple of problems with that. Firstly,
usually the veneer on the outside
is a more valuable wood than what is underneath,
but it doesn't really take into account any damage that might be there.
The second problem is exactly what I'm looking at here.
Most of the time those pieces
also have veneer on the underside, under the top.
So when you remove the veneer from the very top
and leave the veneer that's underneath the top,
what happened to this board can happen to the top of your furniture.
The veneer is there to be pretty for sure,
but there's also a really important structural component to that.
It's totally one thing if you're removing the veneer
because it is damaged and needs to be
replaced, but I guess what I'm talking more about
is the people that think that veneer is somehow
subpar and they just remove the veneer because it's veneer.
A lot of times the veneer is actually
more valuable than the cheap wood
that's underneath of it. So if it's not damaged,
you can still paint or stain or do whatever you want with it,
but just leave the veneer intact.
Of all the mid-century pieces I've done over the years,
I can count on my hands how many
had solid walnut legs.
Normally they're birch or beech or elm or ash,
but it was a nice surprise to find actual
solid walnut legs
on this.
So these patches have had plenty of time to set up and dry,
and I'm just going to trim
the bottoms
and sand it flush to the bottom of the piece.
Now that these patches are in place, everything is smooth.
You can fill those couple of tiny remaining ones.
This is actually a great shot of what the solid wood does over time.
You can see the cracks in the bottom
of that but that veneer holds everything together
and that's why it's so important to leave
the veneer on both sides of your pieces.
This is a TimberMate wood filler. I actually really like this stuff.
So this is just a random piece of veneer.
I'm not even sure what type of wood it is but this
is what I'm going to be using to replace
the missing veneer on the leg boards that require it.
In most cases, you have at least one part
of the veneer sandwich that is running in an opposite direction
in terms of wood grain from the solid wood board
that it is sandwiching, if that makes sense.
So you can see here the wood grain is running lengthwise
and if I flip this over you can see
the walnut is running lengthwise
so on the back side I want this veneer to run vertically. I can't
lose where these screw holes
are so before I glue everything down I'm just using this little
tool here to mark the holes
and then I'm going to use the tool again to help me line this up.
And I'm gonna tape this down.
It can be a little squirmy.
So as I'm putting the other side on,
I also need to poke a hole there.
So you can see that there's some overlap in the veneer.
Fun fact about me,
I used to work as a geophysical tech many moons ago
and splicing seismic printouts was one of my duties.
And splicing veneer here to get a perfect seam
is about the same thing.
You just overlap them, cut them both at the same time
and you have a nice perfect fit.
And on this end of the longboard, I have to do the same thing.
I have to put a piece in where there's a gap.
So all I do is add some glue, put the patch in,
cut through both layers on each side,
and you've got two perfect seams.
My gosh, it felt like forever getting through those repairs.
And I know on this video it was 14 minutes,
but it actually took me a couple of days.
Between not feeling great and the humidity, you heard me.
It was just a lot but I'm ready to start stripping this piece
and getting that old thick finish off.
I did have some
concerns about
the top. There
were these two
or three fairly
deep gouges and
I'm just using the edge of my putty knife
to scrape out any of the stripper that got stuck
in there but I'm gonna do what I can to try
and steam these out even if I can get them a
little bit higher. They're gonna blend in a lot better
when I go to do my final sanding.
This technique can work on solid wood, it can work on veneer.
The catch is it only works on
compressions. If it's a scratch
that has gone completely through the veneer, obviously that's
not going to help. And even on solid wood it will only steam out
so much, but it's worth a shot.
And as you can see here as I'm doing my final sanding grit,
I think this was 180.
They pretty much came out.
I'm going to be using some Mohawk vinyl sealer here to seal the piece.
I'm going to be doing that on the veneer
as well as the solid wood parts.
Normally I do a couple of coats of the vinyl sealer and then lacquer.
If I'm doing any kind of color work I will
do that in between those two steps.
So on the
inside of
this piece
I'm going to
be using a
repositionable
wallpaper.
So I need to take the back off so that I'm able to apply it to the back
and have better access to the sides while I'm applying it.
This has a bit of a grass cloth look to it.
I like to use what I have. I don't always go out and buy
certain wallpapers or things for an individual piece.
I like to use what's on hand and this
I thought would be the best for this project.
Problem is the back panel isn't perfectly flat,
so what I did was I sanded it down a bit
and then I have a little bit of this
primer left over. Now this is typically to seal in odors
but it is a primer so
With sanding down some of the ridges on the back
and adding the primer I think it's going to give
me a flat enough surface that I can add the wallpaper.
This stuff goes on pure white but
it actually dries clear. I also need to paint part of the interior
so I chose the color ash which is
a nice charcoal with a little hint of blue
and I think it'll match fairly well with the wallpaper.
And I don't have to be super careful here the sides
are going to have wallpaper on them anyway.
And once that primer had completely dried,
it was time
to go ahead
and add my
wallpaper.
I left a little bit of an overhang on all of the edges
so that I could go and trim it up perfectly flush
when it was finished.
And I just had to staple it back on.
So with the repairs complete, I can get onto the design.
Now, this is what I started with,
and this is the design I ended up with,
which will change again.
But I opted to keep the slats up at the top.
And for those, I actually found some walnut pieces
and cutoffs from somebody on Facebook Marketplace,
a cabinet maker who trims ends and has no use for them.
I get a bunch of these somewhat odd shaped pieces for $10,
but this is exactly the reason I try to scoop those up when I can.
You never know when you need a long skinny piece of walnut.
So I just took them over to the table saw
and trimmed them all down to one uniform width.
Obviously, before I attach any slats,
I need to attach this sort of Y-shaped frame to the front.
And I'm using another piece of walnut for that.
This was difficult for me.
I was working with angles
that I've never worked with before.
And I also had to figure out how to attach them
so what I opted to do was remove these old trim pieces
and attach new thicker ones
and what I decided to do was sort of cut little spaces for these to fit
into so that it would be much more sturdy much more solid.
These brace pieces were not straight
across they were
on crazy angles
so this was quite
a challenge.
It was not
something I
looked up how
How to do, because what would you even search for?
But this just seemed to make the most sense for me.
Before I seal everything I need to patch
this little hole here in the veneer.
And I'm just using wood filler for that, it's quite thin.
Then I was able to go ahead
and spray with some Mohawk vinyl sealer and I had lined the
inside with cardboard so that I wouldn't get any of this stuff on
my new painted finish or the wallpaper.
These were the pieces from the side trim
that I had just removed.
I have a different use for these.
I had to figure out how to get the slats at the top to stay in place
and I'm sure there's
multiple ways to do it.
The only thing I could think of at the time was to attach this to the
top and then on the section where the slats
were basically just cut this into a bunch of little
pieces to use as spacers.
So to cut these slats on the angle you see here I'm just using this to
To get the actual angle,
Then I was able to transfer this over to the miter saw
and move the arm to get
the exact same angle.
Once I had
the arm locked in place,
I was able to go ahead and cut
the pieces for my slats.
Now obviously these are all going to be different sizes so
initially these were just estimates
and then I was able to trim them to fit.
I also had to figure out how to attach them
to this lower rail and what I opted to do
was cut a little bit out of the end here
so that basically it'll sit like this and then I can
attach it from the back.
But there's an order to this and to get this panel in I can't put the
slats in yet and in order to put the panel in I have
to attach my shelf. So this little sleeping
area inside is going to fit right here.
Obviously this front support is attached to the brace in the front
I also need to attach a piece here and here.
I'm using MDF for the shelf
and the shelf support and this is also what I
used for the floor in the piece.
I just realized I didn't show it but that's what
I used for the floor. Attaching
this to the back panel is a little tricky
because the back panel is very thin
so what I did is I actually went and
stapled it from the other direction
afterwards so it's in there nice and
tight. Then I went and cut that strange shaped panel about eight times
Until I got it just right.
Dry fit it in and then it was time to have the initial inspection.
I think that went well.
Time to work on the bottom panel.
I didn't have a piece of board long enough
to do what I wanted for the bottom so what
I decided to do was switch up my design a little bit
and add a section of walnut veneer
on the left side and then do that really neat sort
of color blocking on the right portion.
I also went in and added veneer to the back
so that it was one strong piece.
I actually initially went out and bought a piece of plumbing equipment
to make the cat tree out of but I like
to reuse things where I can so I went to
the hardware store up the street to see if they had any
empty carpet rolls and they had one left
which they gave to me for free so
that was definitely a win. I cut off one end so that it would be
perfectly straight and then I went and measured
the interior dimensions of the cabinet
because I want this to be floor to ceiling
It was slightly too thick for the saw
so all I did was just turn it a little bit to finish the cut.
Now I had to figure out exactly where I wanted to put it.
Initially I was picturing it right in the
middle but that would mean I would lose my sleeping area in the bottom.
So then I thought, well
actually Andrea thought, I should move it all the way over.
That actually gave me a nice sleeping
area in the bottom and it covered that strip in the back
so I like that. Back to the slats.
This is how I MacGyvered things to make
that little lip that sits on the brace and attaches
at the back.
I just used the miter saw to cut down about two thirds
of the way and then this little
Japanese saw to cut the rest off.
Made sure to leave just a little bit remaining
so that I could get it perfectly smooth and
flat with a chisel afterwards.
Just to side note about this middle panel,
I opted to leave that out more so for kind
of a safety feature.
I wanted to be able to reach in and grab a cat if needed
or have easy access to the different
pillows if they need to be changed.
I thought about putting a hinge door on there
but ultimately I decided to just leave that
middle section empty.
Just like the veneer patches, this new walnut is a slightly different
tone than the rest of the piece.
This Mohawk toner is going to help it all come together a
little bit better. It's not going to remove all
of the variations, but it's going to almost
instantly make it warmer, which is what I want.
Once I was satisfied with the color, I believe
I did a couple of coats of the toner,
then it was time to go in with a few coats of lacquer.
To be efficient in this job, you need to be able to multitask.
So while the lacquer was drying, I went and painted that panel.
Now looking at them in the jar, these don't all look like whites.
But if you were to look at these colors on a piece of furniture,
they would absolutely all look white.
Some are definitely cooler than others.
Lamp white, for example.
This is too cool for what I want.
This is too beige for what I want.
Cashmere, I'm pretty sure, is too warm.
So it's between these two.
This is picket fence and casement.
If you're ever on the fence about a color
and you use Fusion Mineral Paint,
I highly suggest you get one of these fan decks.
You can actually compare the colors side by side.
And I want to go just slightly warm with the white
while having it still bright.
I think this will go better
with the warm walnut versus something that's too cool.
So my little panel here for the bottom is now dry.
I'm just going to make sure everything is sanded smooth.
And I'm going to go ahead and add some vinyl sealer to the walnut.
And I actually just ended up going over the whole thing.
Once that was dry, I taped off the walnut
and used an actual paint primer
on the part that's going to have the color blocks.
Go back
to the cat tree.
In the diagram I have it on the right side
but as you know it is now basically in the middle.
This is part of the plumbing assembly that I bought
because that's what I was initially
going to use but I found out
that this flange actually fits perfectly up inside of this carpet
tube. This is great news because it's going to make it
so much easier to fasten to the piece.
This is a two-person job.
I had to wait for Andrea to get home to help me with this part.
We bought a bunch of this thick rope from the dollar store.
Initially I was going to use like jute
for that very scratchy rope but I couldn't get
any at a decent price and I didn't want
to spend a fortune on this scratching post.
I also took a trip to Giant Tiger,
which is kind of a discount department store.
I was looking for something that I could use for the pillows.
I knew I wanted to put a custom pillowcase on,
but I needed the base, and we actually
found these dining chair pads,
which were the perfect size, pretty much, and the perfect
thickness.
I bought this super soft, fuzzy blanket,
and that is what I'm going to fashion my custom
pillowcases out of.
I also bought this non-skid pad for the very bottom of the piece.
It took a few tries to get it cut just
so but finally managed to get it as close as possible
and then it was time
to install the
scratch post.
I made sure
to vacuum off
any little
glue stringies
that were still on because we don't want any kitties eating
that and this was very sturdy
at the bottom but to secure it
to the top I just stapled a few small scrap pieces of
wood around it and that is nice and solid.
What on earth are all of these colors?
These are what I'm going to use to make my little panel here
and it looks a little bit different
than it does in the diagram
because of just the way I ended up having to do it. The only color I
used straight was this yellow which was Prairie Sunset.
I added some Fort York Red to some Prairie
Sunset to make that nice almost corally color.
For the green I used Upper Canada with a little
bit of Bayberry. Initially it wasn't quite dark enough
so then I added some more.
And this is French Eggshell with a little bit of Midnight Blue
and then a fair bit of
Chesler and this gave me
the perfect pastel-y blue that I was looking for.
That white paint
on this panel is dry now
and it's time to seal it.
I'm using Varathane Premium Diamond wood finish
which is a water-based polyurethane.
It will not yellow over white which is why I'm opting to use it.
Okay so these cushions are going to be the new little sleeping beds
and here's where I screw up.
And you can tell that I am not a seamstress.
Immediately after I cut this line,
because one of these pads had
to be a little bit smaller than the other one,
immediately after cutting it,
I realized I should have cut it at the seams and then just cut the
foam on the inside. But nope, I decided to tear through this cushion.
And as soon as I was done,
I was like, oh, now what? Like, how am I going to fix this?
You can see I just, yeah.
I don't do this sort of thing so don't judge me. Just don't do it.
Down in my craft room getting ready to make these pillowcases.
Now there's something you should know.
I haven't used a sewing machine since grade seven
which was pretty much exactly 30 years ago.
Andrea got me this sewing machine three Christmases ago back
when I had my shop because
I got it into my head that I wanted to start making
these tea towels out of repurposed fabrics.
Well, that was the year I ended up closing my storefront
and this has sat in the box ever since,
so I'm very excited to finally be using this,
but this was a huge learning curve.
I'm probably doing everything wrong, don't judge me. Again.
In all fairness, these machines are super user-friendly.
And I had no problem setting it up, but it's things like
this that I struggled with like where to put the pins and you can see
They're probably in the wrong direction there
Anyway, I was super proud to have come up with this pillow
So it's time to give it a test fit
and I was initially going to put a zipper on the end of this
But this was filmed on a Sunday
and the little fabric shop up the road is actually closed
And I didn't want to wait two or three days
because this was actually the holiday weekend here as well
So what I ended up doing was sewing part of the edges here
and just leaving a little hole
So all I would do is just fold up the pillow stuff it
in and then flatten it out inside
And that's totally fine. I'm happy with that.
Not too shabby for someone who hasn't sewn in 30 years.
Now I just have to repeat the process for the other one.
Back to the
furniture,
and in
particular,
the slats.
Now that the shelf is in place and the cat tree is in place,
I can work on putting these in.
As I mentioned before, I was using little spacers on the top,
and then of course the bottom, just temporarily.
And just tacking them into the back of this brace piece.
Once those are in place I need to attach this side panel
and this scrap piece of walnut was
actually the perfect length
and will give me something to tack into and this will tack in
on the bottom here to the shelf
but this is a nice chunk of walnut I could make a handle
or something out of it
so what I opted to do was use one of the scrap boards
that was originally in the piece cut that down
to the same size and use that instead.
And I could just tack this in and there are little tiny marks here
and I just touched those up a little bit later.
I apologize here
that this
particular clip
is blurry.
This is where I'm doing those color blocks on that bottom panel.
As I mentioned it ended up being a bit different than
my original design but that's okay.
Once I had finished I realized I
didn't like the second blue one
so I actually turned that one yellow and went ahead
and did my second coats on everything.
These don't need to be exact
because there are pieces of trim that are going to separate these
color blocks. First I am going to add the trim to this panel here.
I wasn't initially going to
do a trim but it was so hard getting
that panel cut just perfectly that I decided to add the trim
in. Because the panel is quite thin I need to go
with a shorter pin here because I don't want any
pins or staples sticking out anywhere
on the inside that kitty could get scratched on.
And I accidentally bumped this slot here
and made a little chip so I had to fill it with
some wood filler and then once that dries I'll try to color match it.
This trim is just going to give me a tighter fit
and a little bit more of a seamless look.
Once it's in place I'll fill the little holes
in the seams where the two pieces
pieces of trim butt up against each other
so that hopefully this looks a little bit nicer.
I really am in the home stretch now.
This took me quite a bit longer than anticipated,
both from being sick and then just kind of
struggling with each section of it.
I've never done anything like this before.
I'm super proud of the end result, but there's also,
if you guys know me at all, there's
things that glare at me, but this is a learning process.
You can have the best plan and the best design imaginable,
but things don't always go the
The way you expect, so you have to roll with it.
Even though composition-wise I probably would have liked
if this whole bottom panel was color blocked,
I do like the look of the walnut here.
This is just tacked in on the back.
So one of the things I haven't talked much about yet
were these flowers or greenery.
In my mind the white panel is just so stark and kind of bold by itself.
So I thought maybe breaking it up
with a little box of some flowers might be nice.
I bought this box from the dollar store, as well as the plants.
And this isn't the box I'm going to use.
This is the box I'm going to cut up
so that I have a template to make a box.
I've never done anything quite like this before,
so I wanted to test it out first to make sure I had the right size
before I cut actual pieces of thin plywood to make a box.
In retrospect, it would have been easier to make a nicer,
more substantial box than this very thin one.
But I wanted to keep it as light as possible.
And to be honest, I'm not 100% sure if I'm even going to use this yet.
It was in the design, so I'm making it,
but there's a part of me that is afraid to
cut holes or staple into that nearly perfect white panel
because it took so long to get it right.
So I'm going to stage it without the box and the greenery.
I want to know if you guys think I should add it or just leave it be.
So my box is done now. It does fit this. If I do end up doing it,
I might thin these plants out a little bit more.
Part of why I wanted to build this box even
if I wasn't sure I was going to use it was
to just build a box and kind of get experience with it.
And I found it was sturdy and solid on all the sides except for one.
This is the side and what the hell?
How can the rest of it be square and then that one corner be off?
But this won't make a big difference if I do decide to use it.
You'd never see it.
Yeah, it bugs me a little bit
so I need to figure out what I did wrong there.
This project was a time and a half.
I'm really glad that the shell of this piece didn't get
tossed. This is proof
and an example of how you can take something like this and turn it into
something completely unique and useful.
Even though I'm technically out of the running for
that pet challenge that I mentioned at the beginning,
I still wanted to finish this project
and mention that challenge. Please let me know
in the comments below what you think of my kitty flip
Make sure that you stay tuned after the initial reveal
because you're going to see the best reveal yet
and that is when I show Nacho his new little condo. As always
thank you so much for watching and I will see you next time.