Today we design a string / knot puzzle from scratch in Fusion 360 and manufacture everything using a Snapmaker 2.0 CNC, a Bandsaw and a bit of hand sanding :) What we get is a beautiful oiled beech wood puzzle that you can easily DIY at home =) Enjoy! =)
0:00 Intro 0:21 The Basic Idea 0:56 What we Need! 1:58 Main Body Design in Fusion 360 5:22 Main Body Manufacturing in Fusion 360 12:13 CNC Main Body 12:53 Puzzle Ring 14:59 Band Sawing and Sanding 15:43 Puzzle Assembly 18:17 Outro
good morning fellow woodworkers welcome
back to our video today we are going to
design and also manufacture string slash
not puzzle together from scratch
i haven't thought about the whole string
puzzle too much up until now the only
thing that i have in mind is a simple
concept that i'm going to present to you
now so let's imagine we've got a cable
which is attached to some kind of
machine for example my cnc up here and
for some odd reason we don't
know why our cable got stuck underneath
the bar for example you can get the
cable out by any means whatsoever apart
from this method right here you see you
can't really get it out right now but
what you can do is you can pull the
string under here just change the
direction of the knot
and then
voila we got our cable out and this is
basically the
mechanism that we are going to use
mainly for the puzzle and we are going
to add a little twist to it too
now here is what we are going to need
for the puzzle we are going to need some
kind of wood i'm going to make use of
beach wood because it's nice and stable
it's a pretty massive and hard wood and
it's going to stand the test of time
definitely what we also need is some
kind of thread i'm using four millimeter
diameter nylon thread um that you can
buy on amazon for example in a brownish
color i suppose i'm not good with colors
to be honest and also i bought some
beads um some very edgy beads they are
pretty edgy from amazon because i don't
want to manufacture on my own and they
all have holes drilled into them i think
three millimeter holes other than that
what we are going to need as far as
tools are concerned are c and c and if
you don't have a cnc in at hand a
bandsaw and a palm or plunge router
should do too and a bit of sanding paper
now we are going to go ahead and get
started with designing the main body of
the string puzzle and yeah this is
basically all that we need and the thing
that we are going to use to add a little
twist to the puzzle let's dive right in
we are currently in the design interface
of fusion 360 and we are going to go
ahead and get started by creating a
sketch on the x-plane on the x-y plane
and what we are now going to do is we
are going to think about the dimensions
of the puzzle i think it should be a
nice and compact kind of puzzle maybe
this size just looks something like
let's go with a length of i don't know
um 13 centimeters
basically and let's say we want a height
of about four centimeters this should
sound good let's start off by creating a
rectangle of these dimensions
okay 130 by 40 millimeters what we also
need for the string puzzle to work is
some kind of slit so remember how there
was basically a slit where our cable
went through now the slit
shall be of the size um smaller than
basically the diameter of our beads that
we are using they are like two
centimeters in diameter and to make
pulling the string through a tiny little
bit harder to increase the difficulty of
the puzzle bit more we are going to go
with they are four millimeters let's go
with one centimeters as a little pass
where our um string is going to go
through
okay this is now nice and centered so
what i like to do is i don't want to
leave it like this i don't want to have
a blocky thing what i want to have is
something nice and dynamic with a few
around edges and like that's why we are
going to put a bit of um fillets and
also a bit of i know hexagonal
style to this whole puzzle yeah let's
let's do it like this let's put like a
hexagon structure on here
we're going to cut the rest off pretty
soon
yeah this should work now we are going
to make use of the cutting tool to get
rid of all of these lines that we do not
need
let's see if it looks yeah i think this
should look kind of okay also we are
going to
put some nice and round
parts to the inside too let's put a
circle in here with a
radius equal to
five millimeters
[Music]
now we are going to cut the rest of two
just like before
this looks rather okay i think now we
need to think about how we are going to
extrude this whole structure
now the thing with my beechwood is that
it's pretty thick it's about two
centimeters thick but i don't want to
have a two centimeter thick board you
could say or puzzle what i would rather
like to have is like one centimeter so
we are only going to make use of
half of the thickness of our board that
we are going to have meaning we are
going to extrude our structure by one
centimeter
10 millimeters
and now it's looking like this i think
this should look pretty good overall
what we're also going to do is we are
going to fill it edges out here
and also this will make sanding a bit
easier if we already have nice and round
edges let's go with fillet of 5
millimeters maybe
yeah this looks good let's take a look
at the top view
yeah this is looking pretty fine okay so
we got our main structure going this is
basically all that we need for now and
now we can go into manufacturing mode
now when dealing with manufacturing mode
what you need to do first is you need to
create a new setup so let us create a
new setup and let's say we are going to
take this body obviously into
consideration in a set axis and x-axis
configuration and also we don't want to
have any additional stock
okay dust far does good and now we can
go ahead and get started with clearing
out the middle part our slit and also
getting ourselves the contour on the
outside so i'm going to go ahead and get
started with adaptive clearing i'm not
using the
the hole or pocket mode for that because
with the pocket mode i'm going to run
into a few difficulties when it comes to
my cnc my cnc doesn't have the biggest
horsepower there is i'm using a modular
thing the so-called snap maker 2.0 and
it's not the
best cnc out there by by all means it's
definitely just a beginner cnc and it
has a small downside namely a few
directions
are a bit weak and with a bit weak i
mean very weak my cnc tends to get stuck
in hardwood all the time and this is why
i need to take care of the depth of cut
very carefully and also i need to clear
bigger areas using adaptive clearing
because otherwise my cnc just couldn't
do the job this is why we are going to
go with adaptive clearing but if you
have a better cnc definitely make sure
to use the pocket mode for example
using 2d adaptive clearing i'm going to
choose the corner that we got down here
and then
now i'm going to select the tool the
tool i'm going to use is just a 3.175
so 1 8 of an inch i think
diameter
and this time fourth flute
bit because i just like to use these on
harder wood types because i can crank up
the feed rate to
a lot and it's going to get the job done
way faster than i would with a two flute
bit so we are going to choose this one
just for now and then we are going to
crank the cutting feed rate up to about
5000 millimeters per minute this is
totally fine when using adaptive hearing
now we are going to go over to
our
devs we are going to leave some stock um
exactly i want to use radius stock but i
don't want to use axial stock we are
going to use half a millimeter of radius
stock which we are going to take off
um
later i suppose using a 2d contour on
the inside so let's go with half a
millimeter of radius stock and also we
are going to use roughing step downs of
approximately let's go with 1.5
millimeters for now i think this should
do the trick
and this is all done with the adaptive
clearing
ah no we are not yet done so here's one
thing that adaptive clearing does a lot
of the times as well as the pocket mode
namely if we take a look at the
machining time
you are going to notice that we get 10
minutes of machining time the only
reason why we get 10 minutes right now
is because we are doing um one way
milling at the moment and if you take a
look at this helix i think it's usually
set to like three degrees but we don't
need this right here for the depth of
cut that we are using right now um it's
totally sufficient if we use like a
helix of 20
degrees and this should reduce our
milling time tremendously i think it
should half the milling time or even
more
we are at three minutes now only third
of the milling time yeah this is way
better this is what i'm talking about
okay very very nice very nice now what
you see here is this little part that we
got right here is what our um adaptive
clearing doesn't take off right now this
is the stock that we are leaving at the
moment now to get rid of this stock what
we are going to do is we are going to
get ourselves a 2d contour and we're
going to select this one yet again but
not completely as mentioned before some
directions on my cnc are very weak this
is why i need to split up the 2d
contours always into two parts
the first part being and if you want to
split up a 2d contour or pocket etc into
more parts you are going to press the
alt key if you're not familiar with this
and then you can select just part of the
contour okay now
what i want here is i'm going to use the
same router bit once again but this time
with 1
800
millimeters per minute as the cutting
feed rate and i'm going to do multiple
passes multiple deaths once again of one
millimeter what i want is i wanna use
the sideways compensation left for now
because this is um basically the better
direction for my um cnc when it comes to
taking off stock on the right hand side
in the regular con conventional type of
milling forgot the word for a second so
we are going to use this and now we are
going to duplicate
this 2d contour and what i'm going to do
now is i'm going to select the other
side
and i'm going to use the sideways
compensation of right now
and this is good this is going to make
it way easier for my cnc to go through
the stock
now we should be done with our slit on
the inside and now we can go ahead and
cut out the 2d contour on the outside
for this i'm just going to copy the
first one that we got right here
duplicating it double click onto it we
are going to leave the cutting feed rate
as is for now and now i'm going to
select the other chains namely i'm going
to start here getting the stronger
directions done for my cnc
and the sideways compensation is already
pretty fine can complain about that and
when it comes to cutting with the snap
maker since it's so weak and this is
very hard wood beachwood is tremendously
hard
especially for my cnc i'm going to
lower the roughing step down even more
to odot let's go with 75 millimeters
and i'm going to duplicate this one once
again
we are going to do the same thing as
before at first we are going to select
our geometry once again we are going to
go at it from the other side
and once again we are going to change
the sideways compensation such that my
cnc has a better time
and if we now take a look at this model
this is everything that we are going to
mill out with it and now we are
basically done with fusion 360. now i'm
going to post process everything and
then we're going to go over to the cnc
now what i usually do with my stock is i
pre-drill it at first because i don't
want to crack the wood or split it up
and then i'm going to attach it to my
waste board using a simple drill and
that's what we are going to do now
and this up here is the fourth loot bit
that i got from ultra tools with a 30
degree helix i think and now let's start
a snap maker and let's go ahead and get
started with the milling
next let us add the twist to the puzzle
that i was talking about earlier all
that we're going to do is we're going to
add a small wooden ring or something of
the sword a wood hexagon i would rather
suggest because it looks a bit more like
the original puzzle then we got right
here the the main body so this is what
we are going to do adding a ring with a
hole in the middle to the whole thing
and this should increase the difficulty
time a little bit more for the puzzle
because otherwise it would be a pretty
straightforward and easy to solve once
again we are going to create ourselves a
sketch
and everything that we need to do now is
create a hexagon and for this we are
going to use the dimensions that we did
before kinda so like 40 millimeters by
40 millimeters
and now we need to trace out a kind of
hexagonal shape i'm just going to
connect corners right here a tiny little
bit okay this should do the trick it's
not perfectly hexagonal but this really
doesn't matter
and now we are going to add a hole to
the whole thing let's make it circular
and let's go with one centimeter once
again
and now we can start to extrude once
again so let's go with um i don't want
the ring to be pushable through the
slit that we got in our main body but
considering that we have four
millimeters of string i think seven
millimeters should be sufficient
and that's right here's our ring our
hexagon whatever and now we are going to
fillet once again with five millimeters
and this is what we got now and as far
as manufacturing go we are going to go
the same route as before we are going to
clear out the middle hole and then we
are also going to use a 2d contour on
the outside and once i'm done with the
post-processing we're going to go over
to the cnc once again and start milling
[Music]
and that is as far as the cnc machining
is concerned we are now going to go down
into my basement and we are going to use
the pencil to cut everything out and
yeah after that we are going to send
everything and basically assemble the
puzzle
now everything came out rather nicely i
cut it a bit thin to be honest there are
two millimeters missing until like one
millimeter so i need to work on that
maybe i need to um take the depth of cut
a bit deeper for the um stock in the cnc
but other than that i'm going to send
everything and then we are going to
assemble the whole thing
now what we also need to fasten the
string is a little hole up here
on one of these corners it really
doesn't matter where i'm going to use a
three millimeter drill bit for that
and once that's done i'm going to give
it a little oil wrap and then we can
start assembly
now the assembly is rather
straightforward so i took one of the
beads and
i put the string into the bead okay so
now next thing that we need to do is we
need to put a string inside of the hole
that we drilled here
and i'm going to pull it through
completely and now i'm going to make a
knot here maybe i find a better
alternative once it's released on this
damage eu we'll see about that and now
basically the
puzzle is ready to be assembled i'm
going to create another separate
solution and assembly video you can find
the link down there in the description
now at first what we are going to do is
we are going to take the rope like this
and then we are going to pull it through
the slot that we got here okay thus far
does good now what we are going to do is
we are going to take our ring that we
got here and we are going to put it
inside
of here now i'm going to show you at
first what it looks like if we don't use
the ring now
just like with the cable this is the
following situation the cable went
through here and now what we are going
to do is we are going to take the string
here pull it through and
now we are at the point where we need
to solve the puzzle this is like the
situation with the cable but it's very
easy to solve all you really have to do
is pull it through here and then you are
once again done okay but now we are
going to use the ring too we are going
to pull it through here and now we are
going to see if it becomes any harder if
we have a ring with such a small hole we
are going to pull it through here and
now next thing we are going to do is we
are going to take the cable situation
just the cable we are going to put it
into
this loop
now next thing we are going to do is we
are going to pull
on these two and we are going to drag
this
string that we have right here through
the hole this should work out in normal
case yeah very nice now we are going to
pull the whole thing through here
i hope this does work out awesome
okay
and the last thing that we need to do
now and i hope everything works out as i
intended it to work out yes now we are
at this stage and we are going to pull
this one through here and to make it
even a bit harder to start off we are
going to track our ring through here
and now our puzzle is assembled this is
what the puzzle should look like this is
what i thought about um in my head how
it should look like and now it's ready
to solve as mentioned before the
solution to the puzzle will be linked
down there in the description and this
is everything i wanted to cover for
today and i hope you did like what you
saw today
from the release of this video onwards
this puzzle will also be available for
purchase over on stem merge dot eu if
you don't have the ways of creating one
for yourself you can now find a link to
stem with eu down there in the
description and you can get one for
yourself for a pretty affordable price
even though it's handcrafted
and don't forget to watch the other
video too with the solution to the
puzzle if you couldn't follow along or
you can download this video and just
reverse this assembly time a little bit
and this should work too but this
concludes today's video and i hope you
did like what you saw today all the
insights into fusion 360 like the whole
mix of starting from nothing to a final
product basically and yeah if this video
is
actually a good format then i'm going to
create more of these like the
brainstorming for products for stamina.u
up until the um basically release on the
website and if you want to see more
woodworking and diy projects then
definitely make sure to subscribe to the
channel as well as to check out my
shopstandwich.edu also i got a main
channel flammable maps um yeah you
should check it out too um has like a
quarter of a million subscribers so it's
kind of a big channel already i hope
this channel is also going to grow um as
the other one did and yeah what else can
i say please stay safe don't get caught
by corona and i'm in the next video you
guys have learned the day ciao
[Music]
[Music]
you