Decoding Maya Hieroglyphs with 3D Technology
1 Video View·Nov 8, 2022
Welcome everybody.
It's my pleasure tonight to introduce Barbara Fasch, an artist and director of the Corpus
of Maya Hieroglyphic Inscriptions at the Peabody Museum.
This is a key and important part of what the Peabody does and is a unique program that
we've had here for many, many years.
Barbara is also co-director of the Mesoamerican Lab and the Santander Program for Research
and Conservation of Maya Sculpture.
In her corpus role, she carries on the Peabody's publication of the flagship catalog of hieroglyphic
inscriptions, started by Ian Graham in 1968.
And she's just published a new volume on the Cozumel-Hualpa sculpture, which is spectacular
and has just rolled off the press.
She's also curated numerous exhibits of the Peabody.
Many of you have probably seen these over the years, including Fragile Memories, Distinguished
Casts, Storied Walls, and the more recent Maya Section of All the World is Here.
If you haven't seen it on our fourth floor, please come up and see it sometime.
In addition to museum work, she continues to build on her 40 years of research at the
Maya Archaeological Site of Copan, Honduras, including as a creator of the Copan Sculpture
Museum.
We have a publication on that too.
Most recently, Barbara has begun collaborating on analysis of a new Maya mural at the Plaza
de las Columnas project at Teotihuacan, Mexico.
Along with many articles and book chapters, her publications include Pre-Columbian Water
Management, Ideology, Ritual, and Power with Lisa Lucero in 2006, and the Copan Sculpture
Museum, Ancient Maya Artistry in Stucco and Stone, the one I just mentioned.
In 2011, with the Peabody Museum Press.
In 2008, she was awarded the Hoja de Laurel de Oro in Honduras, and in 2015, the Orden
del Pop in Guatemala, in recognition of her service in preserving and documenting the
cultural heritage of Copan, Honduras.
And as you will learn tonight, she continues to develop new and interesting and cutting-edge
ways to record and study these Maya inscriptions, and we will see that tonight in Decoding Maya
Hieroglyphs with 3D Technology.
Please welcome Barbara Fack.
All right.
Well, thank you, everyone, for coming tonight.
Thank you, Jeff.
Thank you, Jane, especially, for the invitation to speak about this subject.
And I liked the staff's work so much with the poster that I took some of the color for
my opening slide here.
So, 3D technology is really everywhere now, and I just have one question.
I won't ask any others, but I'm just curious, how many of you out there feel like you've
had some experience with some aspect of 3D technology?
Wow.
I think 10 years ago, had I asked that question, maybe two to five people might have raised
their hand.
So, we've really come a long way over the years, and you might say 3D technology goes
back to these stereo photographs from the 19th century when people were taking views
of objects just slightly different angle from each other and looking through those stereo
lenses to create a 3D image that they could study.
But today, I think we really think of 3D scanning and 3D models and fabrication.
And that part of it really only got started in the cultural sector in about the 1990s.
So before that, it was really primarily in industrial engineering and aerospace and car
design and then in architecture and then CAD models.
And then it slowly crept into the cultural sector, cultural heritage sector.
And now it's really being developed so quickly that, I mean, it's just amazing the range
of applications.
It's used from movies and video games, people can home print toys, but on the other side
of the spectrum to medical science and for things like biotissue printing, bone replication.
Maybe you've been at the dentist office and had a 3D scan of your teeth and prosthetics.
And museums are using it more and more as well.
So I think of 3D technology and cultural heritage as somewhere in between the home printing
toys and bioprinting of tissue.
We're sort of in the middle there.
Why do we use it and how do we use it?
Well, mainly it improves our accuracy and precision of documentation.
So virtual files are really much simpler to share and they take up a lot less physical
space than the old method of making plaster casts, which you can see went from being stacked
like this in Peabody storage to being stacked like this in Peabody storage.
And suddenly it takes up a lot more space to improve the storage.
But we have, I'm going to just show this little movie here, see if it'll work.
Oops, didn't.
There we go.
3D objects like this, it really lets us zoom in on an object farther than we can see with
the naked eye.
And so you're going to see in a moment that when this turns around, there's some really
fine detail over here in the center, that little hole.
And things like that we can just barely see if we take a photograph or are looking at
it in just regular time.
So this kind of study of monuments and this preservation aspect of it is really what we've
come to use, at least in the Mesoamerican and Maya hieroglyphic sector.
We can also use it for replacing and replicating an original.
So in the case of this wonderfully beautiful polychrome panel of stucco, modeled stucco
at Copan, we call it the margarita panel.
It's way deep in a tunnel and it's not something that we can let people in to see.
And so making a 3D model of it is the best way to share it and also preserve it for the
future.
And here it's being fabricated, as you see at the bottom there, for an exhibit that was
at the University of Pennsylvania in 2012.
It's just phenomenal that this subtractive method here that's being used could replicate
the actual piece in very close proximity and precision to what the original looks like.
We've also come a long way in computer performance, and that assists us with sharing 3D work.
For example, on the web we can share 3D PDFs or 3D models for all ranges of study.
So I asked Alexander Tokovinin, who was just graduating with his PhD back in 2007, to join
the Corpus program and help head a 3D documentation program.
And Alex is now at the University of Alabama, but we continue to collaborate.
And this is one of the examples, a piece from a stela that was missing and it's at the Met.
And so we scanned it and then they were able to bring the piece to Mexico and reunite it
with the original sculpture.
And you can share it, like Alex has done with his class here on Sketchfab, where you can
rotate that big, giant stucco frieze from Homul that he scanned, and then you see those
little numbers around it.
Then his class can just click on a number and get some information about that section
of the frieze.
So I first became involved with 3D scanning 20 years ago in 1997.
I hadn't really had any experience with it whatsoever before that.
And the Honduran Institute of Anthropology asked me to figure out a way to make a copy
of this famous monument, the hieroglyphic stairway at Copan.
The reason was that we were losing it to erosion.
So for anybody that's unfamiliar with Copan, I'll just point out where it is here on the
map.
And Copan is generally referred to as the southernmost Maya site.
So you can see it's at the very southern end of what's considered the Maya area.
And it's very well known for these elaborate freestanding monuments carved in the local
volcanic tuff.
You can see some of them in the photo there, in the stairway in the background.
Copan has been a World Heritage Site since 1980.
And the stairway was a major reason and major factor in this designation.
Now, you see the map of the Copan Valley and all the settlement there.
There's settlements that go back as early as 1400 BC.
But the main part of the site is that sort of black area in the center that says Principal
Group.
And the hieroglyphic stairway is there in that part of it.
So the stairway is the longest hieroglyphic inscription in the New World.
It rises 26 meters from the plaza floor.
And pictures just don't prepare you for what it's like when you get there in person.
And you see this monumental text just rising in front of you.
Today, it's reconstructed as 64 steps.
It has a altar at the base.
Let me see if I can point this out.
I think we have to turn this on.
There we go.
So there's the altar at the base.
And this is the head, actually, of a mythological beast.
We think of it as a centipede or an obsidian butterfly combination.
And the body of this beast goes up the side balustrades here.
And you can see maybe better in this photo, there's these curling legs with obsidian signs
in them.
So it's really kind of a fiery beast.
We think, possibly, a fire serpent, maybe like the shoe co-op of the Aztec later on
in time.
But what's really interesting is its body encompasses this whole historical text.
Now, it looks really nice, doesn't it?
But this whole thing is totally out of order, except for the first 15 steps.
And the reason was because, and we'll see in later photos, the whole thing had tumbled
down from earthquakes and landslides in ancient times.
And so it was pieced back together like this in the 1930s and 40s.
So I've had a 40-year involvement with the monument.
I really inherited it.
I didn't start the project.
I didn't start working on it.
I inherited a lot of material that was already done.
And I began working in Copan when I was an illustrator on the Harvard project that was
under the direction of Professor Gordon Willey at the time in 1977 and 78.
And that season, two epigraphers came to visit, Linda Sheely and Peter Matthews.
And my husband Bill and I went out with them to the steps.
And listening to their excitement about the decipherment possibilities, it became clear
someone really needed to draw this because no one had attempted to do the entire text.
And the erosion of the details, as you can see here, was happening faster than anyone
even realized at that point.
This is a photo I took in 2001.
And this is a photo from the Peabody Museum's 19th century glass plate negative collection.
And you can just see how much loss there is on this one particular glyph.
So the Harvard project was followed by a Honduran government project.
And in 1978 and 79, I started to do a freehand scale drawing of the monument.
Now, we didn't have digital photos then.
We didn't even have a darkroom.
We had a camera.
But it wasn't until later that I was able to then use photographs and
trace over the photographs to make a more precise drawing.
By 1999, though, I was using digital technology to take my
images and drawings of the stairway and make, whoops, didn't want to do it,
this whole composite digitally put together.
It was a little bit zoomed in so
you can see that I've numbered all of the different stairway blocks.
And some of the blocks have one glyph unit on them and other ones are long and
they have as many as five or six glyphs across them.
Some of the glyph blocks are divided, so you have two and a half glyphs or
two and three quarter glyphs or one and a quarter glyphs.
So this is a key thing that we need to keep track of while we're working on
the monument and putting it back together.
I still had to produce a final inking of it at this point.
And I thought, well, then I would be finished after that.
But then other important sets of documentation started to come to light.
And this happened three different times.
This one is here at the Peabody Museum.
George Stewart, who was at the National Geographic Society,
came across this in Mexico.
And this is Raul Pabon-Abreu's collection of the stairway.
And he had an artist do a drawing of the whole monument.
It's really not that helpful of a drawing,
because the person didn't understand the glyphs.
But it gives us a fair idea, the measurements were good.
And the photographs were pretty good also.
And so this is a moment in time that we didn't have represented.
So we went through all of these, and I would comb them for
more details that have since eroded.
And the epigraphers and I would work together to add this back into my drawings.
Now, I've likened this experience to sort of like going up the down escalator.
Sometimes wondering if you're ever going to get to the top.
So now the technology's advanced again.
And I'm revising the drawings using 3D models.
And I'll get back to that a little bit later.
So let's talk a minute about why the stairway
is an important monument to understand and document.
It's basically a large history book carved in stone.
So from a point of history, and language, and social identity, it's hugely important.
And in order to understand it and verify it, excavations were necessary
to reveal the depth of the construction history in this pyramid.
And how it came to be there.
So you can see a cutaway section here.
Okay, and all of these different colored forms represent earlier building
constructions underneath that final phase of the stairway.
So let's take a minute and go to the discovery of the monument.
So the first excavations into the steps were done by Alfred Maudsley in the late 1800s.
He dug a trench up at the top.
And the Peabody Museum's expedition from 1891 to 1900
essentially picked up the work after Maudsley.
And this is what the mound looked like when the Peabody Museum got there and
unfortunately cut down all the trees.
But you can see Maudsley's trench there in the middle.
And all of his back dirt that he threw over the stairway that was visible.
Now this part of the stairway that's visible here is important because
it's part of the stairway that used to be up here.
And it slid down and has slumped down over
the other part of the stairway that's still in place underneath here.
And all of this stuff has just laid out and
tumbled down in all sorts of disarray.
So Charles Bowditch, you see down here, he was a benefactor of the museum.
And he funded most of this expedition.
And he was very interested in Maya hieroglyphs.
And he and Frederick Putnam then sent graduate students, John Owens,
George Byron Gordon, and
Marshall Saville to carry out several seasons of field work.
And this glass plate negative then in the Peabody Museum's collection
shows the progress that Gordon followed.
He was respecting the original order of that slumped area.
And here's the 15 steps that remained in situ.
And then all of this is just the mess that is a complete jumble.
Now remember this, okay, cuz it's gonna come up a little bit later.
So he put it all out there on the grass like that and
kept it in good order, really.
This wasn't easy work at all.
There weren't hotels or restaurants like there are today in Copan.
These guys had to rely on going out and shooting game for
meat and relying mostly on tortillas and beans.
They got sick a lot.
They were bitten by plagues of ticks and mosquitoes.
And tragically, John Owens, this is the only photo we have of him.
He died in Copan, probably from yellow fever in the second season.
These folks are, that's Gordon there.
And this is George Shorkley and Edmund Lincoln, and this is Ismael Vallecito.
So during the Fragile Memory exhibit work, we were able to identify
many people that we didn't know previously in the photos.
And one of them was this man who is Don Juan Roman Cueva at age 27.
And he, importantly, was the liaison to the Peabody Museum project.
And when they weren't there, he was taking care of things.
And when they were there,
he was pretty much the manager of the project for them.
He's posing here next to a statue that many of you probably know,
came to the Peabody Museum and is here in the collection.
So let's jump ahead several decades and go to the 1930s and
40s when they start to reconstruct the stairway.
So the Carnegie Institution of Washington Expedition,
Gustav Stromsvik, who you see up in the corner there,
Silvanus Morley, he published this massive tome on the inscriptions of Copan.
And Tatyana Proskouriakoff, the Russian-born architect,
all went to work on working on the stairway.
And they decided that it should be reconstructed.
And they decided to take that section that Gordon had laid out on the grass and
put it back up in place.
And then after they got that up, they decided, well, we might as well do the rest.
And so they put everything else up, but it was all out of order.
But this iconic image that we now think of as the stairway is in everybody's minds,
this beautiful watercolor that Tanya Proskouriakoff painted.
And it's lovely, but it's not exactly what it looked like.
So we have to keep that in our mind or take it out of our minds,
whatever you want to think,
as not being a total accurate representation of the stairway.
And this man over here, Adan Cueva, he was Juan Ramon's son at the time.
He was a teenager when they were doing this work.
And he later became the second director of the Institute,
the Honduran Institute of Anthropology and History.
So one of the big bodies of data came from these earlier expeditions for
us to work with, but it's been followed by a lot of projects that we have worked on here.
Most recently, we're working with the Peabody Museum, the Myocorpus Project,
the David Rockefeller Center for Latin American Studies, and
the Institute of Anthropology and History in Honduras,
using a Santander Bank grant that we have been granted for several years.
And that is helping to promote the work that we're doing now.
One of the biggest challenges is addressing the erosion of the monument.
So these are some photos from the 1970s that show the biogrowth on the stairway.
It was heavily covered with lichens at this time.
Unfortunately, at that point in time,
a Smithsonian biologist thought a good idea would be to spray it with biocide.
And so the whole stairway was sprayed, and all of that lichen was killed and
fell off, and we saw all kinds of things we hadn't seen before.
But it also destabilized the stone, and so
the little fissures where the roots of those lichens had been let water and
other things in, and then they slowly started to flake off.
So things started to erode all the faster.
It's also been restored by the Carnegie with Portland cement, and so
that wreaks havoc on it, because the salts from that gravitate through the stone and
destabilize it even more.
So our task is really complex,
because even though we're interested in doing the recording of it,
we have to always take preservation measures into account at all times.
And unfortunately, some of the very most eroded blocks may never be able to be
restored to their original location.
This is a kind of extreme example of one of the steps,
the lowest, second step on the stairway.
And you can see what happened.
You have the 1895 image up there, and then the 1946 images from the Pavone archive.
And then some other government projects have done documentation of the whole thing.
And in 2006, we did the first color register of the entire monument as well.
But you just see the gradual deterioration of that section on the left-hand side.
So 3D scanning.
So in 1998, I had been put in touch with the Canadian Research Council
through the Getty Conservation Institute.
And they suggested that since they were doing some pioneering research in
laser technology, that maybe this could work for heritage applications for the stairway.
So they came here to the Peabody Museum, and they set up their equipment.
And you can see this rail and two big, heavy tripods.
And it would cast a laser beam, more or less like this, across the monument.
We found the results really intriguing, but the equipment was just way too cumbersome.
And it also took a full nine days just to do that back then in 1998.
And so clearly, we realized it wasn't ready for prime time on the stairs.
Excuse me.
So we waited some years.
And eventually then, the Smithsonian Conservatory started to test different equipment.
And they found that a 3D scanner using an optical structured light system
was available and worked really wonderfully.
Very high resolution and detailed 3D scans could be made of objects.
So we went ahead and tested it.
And as I said, I asked Alex to join the team.
And then he started heading a 3D scanning documentation program that year.
He trained a group of Honduran folks to work with him.
And that's his team.
And they continued to go around the Maya area and scan monuments.
But one of the main tasks at the beginning was to scan the hieroglyphic stairway.
Not a small task at all.
So you can see that this equipment needs to operate in the dark.
And so we're out there in the dark under the tarp.
Everything had to be carried out after 5 p.m.
It really wasn't an easy task at the start.
It took many hours in the dark and buggy nights.
You can see the guy was hitting his neck, you know.
We had to figure out how to maximize the scanning process
and protect the monument at the same time.
So we had to do things like wrap the cable in protective cloth.
We put socks and protective things on the ends of the tripod.
We had to always wear socks when we were up on the stairway.
And we couldn't really have a table like that up there.
So eventually we had to design a table for use on the stairway.
This is how the scanner works and this is what it looks like.
This is the one we used anyway.
It has a projector in the middle and two cameras.
And it projects a series of patterns like this onto the object.
And then by triangulating it with the cameras,
it's then brought into the equipment and software.
And it then produces a scan of that part of the object.
Now, you can have different fields of view.
So you can have a scan this big or this big or this big,
depending on the kind of object you're scanning
and how much detail you're able to capture and want to capture.
The blocks alone were a challenge.
And we wanted to do every block individually
so we could then take that block and move it around later on.
But the sculptures on the stairway were really very difficult.
And so something like that altar at the bottom,
here, this giant big piece,
we wanted to do all in one model.
And so that took 400 some odd scans just to do alone.
You have to put the scanner at all different angles
to capture every part of it.
You don't want any gaps in it.
The really wonderful thing about 3D models
is that we can use different lighting situations on them.
And we can project artificially the light from different angles.
And so that can pick up details
that we wouldn't otherwise be able to see also.
Or if you only took one photo,
or even if you just took photos with different lighting,
you still wouldn't see the amount of detail
that you're going to see in these models
when you can zoom in on them.
So the team worked only during the dry season.
And so that meant that it took over four years
for the whole thing to be scanned.
And we're still completing
the high density processing of the models.
Meanwhile, we can work with lower density models,
such as the one you see here.
This is the same block under different lighting conditions.
And you can see it really does change the way it looks.
It almost looks like a different block completely altogether.
That's the table that we designed
with legs only on one side.
And it would fold up,
and we could carry it up and down the stairway.
This is a real masterpiece of the first model
and reconstruction of many, many, many scans
of individual blocks that Alex united into one model.
And it's a digital version then of the lowermost 15 steps.
And that was basically
what the Peabody Museum expedition found in situ.
Now, of course, everyone had a lot of curiosity
about what we were doing.
And so we invited people out to watch,
but they discovered that watching 3D scanning
of little sections was really pretty boring and repetitive.
So let me just give you a sense of what that's like.
That's it.
Want to see that again?
You do that over and over and over again all night long.
So audiences don't last very long.
Now, the files are very large often,
and they can take a long time to process.
And so even though we wanted to capture as much as we could
on the stairway and other monuments,
we had to set some guidelines for ourselves
because people were getting so excited.
They just, oh, let's scan an entire site,
and we're like, oh, wait a minute.
So these are the guidelines we set down
is that first and foremost,
we were gonna scan for preservation reasons.
So if something was going to be at risk in some way,
then we would make an effort to scan it
so that that would be recorded.
We also would scan things for decipherment needs.
So the stairway kind of fit both of these,
but there's also some monuments
that people were specifically studying,
and they really wanted to have high-resolution
and high-definition scans of it.
But we also wanted to make sure
that everything we scanned could be saved
in multiple archives
because you don't want to have gone through all this work,
and you don't want to have just digital copies in one place.
You really need several places.
And you need the ability
to have that data migrated in the future.
So many of you, I'm sure, know about data migration
and that if you don't migrate your data
in 10, 15, 20 years,
you're not gonna even be able to access it.
Well, we don't want that to happen
because we're trying to save the information
of the stairway as it's eroding.
And this is the only way to do it.
So you could print copies,
but we didn't want to have people
printing lots and lots of copies of things either
because that decreases the value of the original.
So only when they're needed was our guideline.
Now, just to show you a different type of scan,
this is a 3D range scan of the entire stairway.
And we carried this out so that we would have a basis,
structural basis for how to reconstruct it in 3D space.
And this is, our scanner could not handle this.
It could not do an entire building.
It's much too high resolution and detailed.
The amount of triangles is much too dense.
This is much less dense and a lower resolution,
but it has its use also.
So it's important to know that different scanners
are useful for different things.
There's not one that's going to do everything for you.
That's the range scanner up there
on the building of the ball court near the stairway.
And that's just an example over here of just,
we have the outline of the stairway,
but we don't have any of the details from that.
Now, the scans also allow us to make new technical drawings.
And this is what I'm in the process of producing now.
And we do a lot of our drawing now,
do all of our drawing now on these pen displays,
a digital drawing.
And anybody who's still using pen and ink
is going to have difficulty because in this manner,
you can snap together lots of layers of different photos
and versions of a monument.
And then you can toggle between them
and do your scan right there on the computer.
And you don't have to scan it later.
You can just draw right on the computer.
And this increases the precision.
So you're not distorting anything in other scans.
It takes a while to learn to draw this way
after you've been used to pen and ink,
but there's many, many advantages.
So we'll be eventually publishing the stairway
and a whole set of the images in the corpus.
This is a sort of sample mock-up page
of what that might look like.
We would include all of the different photo documentation
of every block.
And then the drawing would be up in the corner.
And the reason for doing all of that
is so that people can follow the progression of erosion.
And if we've added any details into the drawing,
then you can verify where that information is coming from.
And it would be really nice to then use
all four different lighting directions
that we've set up for the 3D models as well.
Now you can see down here from this photo
just how important lighting is.
This is a piece in the Peabody Museum
photographed with two different lighting methods,
and they look completely different.
And obviously, you need something
that's going to bring out the details with raking light.
So what does the stairway say?
You might be wondering.
So as I said, those of us today,
we've inherited a lot of work
that was done previously on the monument.
The early explorers,
they were really interested in the dates.
Pretty much that was all that anybody
had deciphered up to that point.
And so we started with a number of historical dates
that Gordon and Bowditch had put together,
and they published in one of the first Peabody memoirs
in 1902.
But they really didn't know at that time
what the dates referred to other than a point in time.
They didn't have the other information that went with it.
By the 1980s, though, David Stewart and Linda Sheely
had figured out the names of many of the rulers
and the dynastic history
from this monument, Altar Q, at Copan,
and there's a cast of it up on the third floor.
But basically, it's a progression of the rulers
in order around the monument.
And the exciting thing that started happening
as we were working on the stairway
and trying to do some of the early decipherment on it
was that some of these ruler names
started to appear on the stairway.
So in 2006, we started a series of workshops
with epigraphers David Stewart and Steve Houston
and Simon Martin, who maybe you heard his talk in September.
These were funded through Harvard's David Rockefeller Center
for Latin American Studies and the Peabody Museum.
And here you see us pouring over the newly scanned
and digitized glass plate negatives.
So this collection at the Peabody Museum
from the 19th century expedition
produced glass plates that are six by eight inches.
And that's all we had ever been able to see
is basically a contact sheet or a contact print
of that photo.
And so with the digital images,
we were able to zoom into them
in a way that we had never been able to before.
This was all funded by a NEH research project
at the museum in 2006 and seven,
2005 and six, excuse me.
So this is a turning point
in our understanding of the stairway
because in those glass plate negatives,
we realized for the first time
that our slumped section there
that slid over the altar and the stairway at the bottom
is a front view in the background of these photos.
And it always had just looked like a blur in the back.
And suddenly we were able to zoom in
and see details on that
that we hadn't been able to see before.
So there's really a revelation in these photos
that we figure out that this photo on the right
is taken by Owens and his first expedition work
when he started working on the stairway.
And this part here is different than five years later
when Gordon, after Owens' death,
goes back to work on the stairway
and he's starting to lower the blocks.
And you can see all of that there is on the left side
is the washout of this.
And it's fallen back over,
there's the altar just peeking out
of all of that wash that's come down.
So all of this material here, we lost.
And when Gordon laid all of that material out on the grass,
he didn't have that information there.
So we got very excited and started to be able to zoom in
and identify some of those blocks.
So using the current stairway and the drawings we have here,
then we were able to do a reconstruction
of what the parts in situ
that we could see from the glass plate negatives were.
And then we had all these leftovers.
And this is the area in the glass plate negative
that we just saw previously
that we were able to reconstruct that many glyph blocks.
So any of you who've done puzzles,
you know the more you fit together,
the fewer there are left options for the other things.
So as we work, we get closer and closer
to getting the real thing put together.
But also, this prompted us to have to go back to the field
and check some of the details
because we were seeing things on the glass plate negatives
and we were trying to verify
if they were still there on the monument.
So all of this, and especially the slumped section revelation
led David Stewart to making a new photo mosaic reconstruction
and around the same time, the idea was solidifying
that there were two versions of the stairway.
And two construction phases.
And one was built initially to cover the tomb,
or to commemorate the tomb of Ruler 12 and his reign.
And he died in 695.
And then his son, Ruler 13,
dedicated the first stairway in 710.
His son, Ruler 13, is Washak Lahunu Bakawil.
We can now read his name.
But some of you may know his earlier nickname,
which was 18 Rabbit.
In the final version then,
there's an addition to the early stairway
and it's still referred to as the steps of Ruler 12.
So each version is a self-contained text
but they're complementary inscriptions.
Now the seam of those two versions
is somewhere in the middle of that slump.
And it's not in the right height on the stairway now,
but you can see that this is the area of that slump
that is still the intact pieces
of the steps that had slid down.
Now, both dedicatory passages can be read
and with the verb patwan,
which means to build or to shape.
And so that's how they describe
the making of the stairway,
is patwan yei ukme kopana hao,
which means that built are the steps
over the burial of the Kopan Lord.
So later in the dedication by Ruler 15,
they repeat this and that dedication is then in 755.
So we also came to see
that there are two distinct carving styles on the monument.
And they are five decades apart.
And the first one is this more ornate style over here.
And you see the really fine details,
smaller glyph blocks.
And then this later style
that becomes a little smoothed out and puffy
and is larger blocks.
So this is key to us
because then we can start to divide the blocks
into which style they fall into.
We did a paper, a chapter in the Rez Journal about this,
Steve Houston and Dave Stewart and myself on the hands,
masterful hands on the stairway.
We have to remember that
decipherment really goes hand in hand with excavations.
And so one informs the other.
Once the basic dynasty of Kopan
was clearly worked out in the 1980s from Alter Q,
then we started to do excavations
into the other layers of these pyramids.
And monuments started to be found that cross-referenced
some of the information on the stairway
and some of the earlier temples.
So as I said, Bill Fash directed the excavations
over several decades of the entire structure.
And he directed tunnels into the pyramidal structure
and found these earlier constructions.
And these all support the historical data
that's on the stairway.
So tunnels were really important
in figuring out some of the continuity
in this one particular space.
So these are some of the early monuments
as they were buried.
These tunnels have recently been 3D mapped
by Laura Lacombe, who's working with us
on a conservation program
with the Institute of Anthropology.
So this was an exciting discovery near the base,
one of the earliest buildings down here
at the bottom of the stairway sequence.
This is what we call the Montmartre marker.
It's the earliest dated monument at Kopan that we know of.
And it shows the founder over here
and his son, Ruler II,
and there's a set of hieroglyphs in the middle there.
And they're performing a Bakhtun ritual
at a period ending of 400 years
that is very important for the Maya calendar.
But unlike the stairway references,
this is a contemporary monument to his reign.
So it's great because for the first time
we have absolute verification
that he was a historical figure.
And likewise, this monument cites Ruler IV.
That's his name.
We've done a 3D scan because it's a strange monument.
It's laying sideways and it's very difficult
to read it or draw it.
So the 3D scan really helps us change the orientation
and see the inscription more clearly.
And then of course the tomb of Ruler XII
was discovered and confirmed under this sequence,
which is what the steps are actually commemorating
in the first and second versions.
He was buried with these large effigy figures.
Well, they're about this large.
And they are the lids to pots.
And they were found in four quarters around the tomb.
And there are 12 different images
and we interpret that to be sort of like
an altar cue in clay at that point in time.
They were found crushed and so they've been carefully
and painstakingly restored over the years
by Hunter and restoration specialist Antonia Martinez.
So it became clearer that the earlier dates
that the 19th century people like Gordon and Bowditch
had been putting together,
that the Morley had put together
with the Carnegie Institution,
that these really were the accessions
and deaths of specific rulers.
And a pattern starts to develop
where we have the accession of a ruler,
the death of a ruler, the accession, the death,
and so forth.
And these were the ones that we could figure out
most clearly at the beginning.
The rest are somewhere within the jumbled parts.
But there's other information in the stairway too
that we haven't quite fit together where it actually goes.
Now, K'nich Yash Kukmo is the founder's name
and his accession has been assembled by David Stewart
from, you can, all these red squares
represent the blocks in here.
And you can see they're all over the stairway.
But it goes together in one phrase.
And he has part of it over here in his reconstruction.
There's also the death of Ruler 13 that happened
and that's when the second version started to be made
is after his death.
We know he died at the hands of Kiragawa
and that these are some of the war references
to that event.
So, like I said, the more you fit together,
the more, the fewer possibilities you have.
So it keeps us going.
And right now we feel we have about 20 steps
that we still need to reconstruct from the loose pieces.
And there's also a outset panel that we believe goes up here.
So that would look very different on the stairway
and may have been where some of the rituals,
like a new fire ceremony, might have taken place.
So how do we reassemble this?
Originally, I had planned to reconstruct the stairway
virtually in a computer.
I don't know what I was thinking.
If anybody's gone online and ever tried to open a 3D model,
you know how long it might take to load
and then you start to turn it and it doesn't respond.
Can you imagine moving over 600 blocks into space,
virtual space on a computer trying to do it that way?
We'd still be watching one move across the screen, I think.
So I decided instead that we should do a 3D print of everything
and we started to print it out at a scale of 1 to 10,
which is what I did my drawings at.
And we started doing it with a MakerBot, you know,
and we thought we could, oh yeah, I can do it with a MakerBot.
It takes a long time.
One of these could take hours and hours and hours and jams
and it just wasn't working.
So we eventually had to outsource to a company
that could give us a lot more quick results
and get everything.
But importantly, we had to close our models.
So we had, if this is the stairway,
we had basically the top and the front of every riser scanned
as like a little shell and you can't print that.
You have to close your model.
And so we started thinking, well, we'll make a rectangle
and we'll have a bunch of little blocks,
but it was incredibly difficult to make those rectangles.
We had an intern working with us,
Katerina Aurelia, and she was just experimenting
with everything, but in the end, we decided
the best thing to do is just to close it this way
and make a triangle and fill it that way.
And that works great because then we can lay it out
on the stairway like this, on a table like this,
and put raking light across it and work with it this way.
So that's on the table in our lab.
And I made a map of every single block
and numbered every single block.
And so we could then lay out the pieces
as they were produced on that map.
And there's the whole thing.
Now, we've put some of this on display for you
on the fourth floor in the exhibit on the 150th.
And if you get a chance, go up there and look.
Here's a little sneak preview of that Maya section
that Jeff was mentioning.
And you can see George Byron Gordon's pages
from the Peabody memoir and sort of see
the progression of technology there, right there.
So this is always a team effort.
And Dave, Stuart, Alex, Togovinine, Bill, Fash,
and Laura Lacombe now has joined a group.
And she's been helping to close the models
so that we could print them all and also
doing the 3D mapping of the tunnels in Copan.
And she's completed that now.
But also, Floyd Lounsbury and Linda Sheely
were really important figures early on.
They both passed away.
But they were instrumental in helping figure out
some of the rulers' names and dates and just
verbs and other events that were in the Maya hieroglyphs.
So you can just follow our process here a little bit.
We start to reconstruct and take apart the one on the table.
So you see the one we had all laid out.
And then we started to take it apart and match it
to the different reconstructions that David
had of various parts of the stairway.
And then we start renumbering with Roman numerals
these new steps.
And we have different sections.
And then we can move them around.
But it's a lot of pieces and a lot of material
to keep organized.
And then we found out, oh, we forgot a few things.
And we had to go back into the Peabody collection
and scan a few other things that had
been overlooked the first time.
Now, one thing about the 3D scans
that we found out was just fantastic
is that once these blocks are three-dimensional,
you're getting breaks and things in the rocks in the back
that you wouldn't see in a two-dimensional image.
So you can see how we can fit something like this together
because there's a really nice seam there.
Well, that would work fine in a photograph or a drawing.
But this one is an example of there's a big gap there.
And if you had a two-dimensional image only of that,
you wouldn't see that the break in the back
actually fits them snugly together.
So this is a way to confirm some of the fits
that we think we might be making.
So here's where we are now.
This is the part that we have not yet fit in.
So it looks like more than 20 steps.
But really, once we get it all sandwiched together,
it'll probably be around 20 steps
that we still have to figure out.
And as I said, some of the glyph blocks
are split and divided.
And so we can reduce some of the possibilities
by just working with things like that.
So what have we learned about the stairway
in this whole process?
We now know the text is a record
of the Copan dynastic history,
and earlier monuments corroborate
the stairway's narrative.
The different sculptural hands carved the text,
which can help guide us in the reassembly process.
That we know the stairway was constructed in two phases
for different political purposes.
And we know the names of rulers
and key events in their lives.
That the first stairway was dedicated to Ruler 12,
and his resting place was a tomb in an earlier construction.
And he was a revered ancestor and historic figure.
And he's honored again in the second edition
of this stairway.
And we cannot stop the stairway from deterioration,
much as we would like to think we can.
It's going to deteriorate with time.
So all you can really do is slow the process
and hope that even better technologies
will be able to be applied to it in the future.
What we've done with the 3D scans
and our replication is to basically freeze it
at a point in time.
Now, some new technologies may be possible
to use photogrammetry, which is essentially stereo images,
to actually clip on a 2D image
from the glass plate negatives
and create a 3D model
that looks like it was carved yesterday.
Really, it'd be like stepping back in time.
It'd be so cool.
But believe it or not, the glass plate negatives
have really proven as, at least as valuable
as the 3D technology in decoding
the hieroglyphic stairway.
So it's just amazing what a combination
of the technologies will bring you.
But what's really evident after all this work
is that each generation is going to face challenges
of migrating this amazing historical text
into the future and saving it.
Some of the next steps would be to take it
from the printing stage,
which we can only do in a small scale,
and do it to larger subtractive manufacturing.
This may not happen in my career.
It's a huge endeavor, and it's something
I may need to pass on to the next generation of scholars.
But one thing that I've learned,
and even though we may individually arrive
at the top of that escalator, someday,
it's only one stage in really a constant progression
of study on this monument,
and I think it'll most likely continue indefinitely.
So thank you for listening.

