Building Front Suspension + Steering on our Power Wheels Racing Kart | Cinderella Kart Pt. 2.

Automobile Regency
59 followers
52 Video Views·Oct 22, 2022
You fit like Cinderella in her glass slipper. Yes. It's stiff.
That's cool. Yeah. Oh, you got it. Uh huh.
So we were broken into last weekend while everyone was gone.
Everyone was out of town. Um,
there was a break in and five to $7,000 worth of stuff is missing so far.
So Charles called me Sunday night last yesterday evening in a panic telling me
that his snap on tools were gone and the utility trailers gone.
So someone cut the,
cut the lock on the gate or they cut that. What was it? Yeah.
They cut the lock. They cut the cable. Yeah. They cut the cable on the gate.
Then they cut the lock on the little shop. Yeah, dude. Show them the little key.
This is how you found it right here. I found this on the ground,
found this on the ground and the door was, it was hanging open.
It was hanging open. Everything was hanging open. So,
and I figured John couldn't find the key.
So he cut the lock to get in here and was using the utility trailer for yard
work. But I noticed there was a lot of tools missing.
And if he were to borrow that many, he probably would have called me.
And there was just, it's my whole top drawer.
It's like four feet wide is all gone.
That's how I made a living and I'm hurt that they got me.
Yeah. They also took our utility trailer.
We were planning on going to the track Wednesday with the rail,
but can't do that now because we don't have a trailer. Um,
thankfully everyone is okay. It could have been a lot worse.
They didn't get into the big shop, but it is such a bummer,
especially cause Charles was hit the hardest in, in tools that are missing.
So we came in here and what's so weird is that we noticed that
the plasma cutter to our Langmuir, um,
was just like stretched out. Like they tried to take it.
They didn't take the laptop. They were like half a dozen bikes in here.
All those were untouched. Charles's four wheeler was right here.
It was untouched, but he came in here and like everything expensive.
This was all red, all red, all red snap on stuff.
All the ratchets are missing. They missed a few,
like this one was sitting right here and they missed it.
So they must've come in here with flashlights or something.
But my spark plug ratchet, I mean they missed this one.
This one's not too cheap and my initials are stamped in all my tools.
So CH is, is stamped in everything. So I, good luck selling it.
But I mean they probably will. Uh,
and I've gone around to the local shops and asked them if they see anybody
coming in and trying to unload tools cause they might be smart enough not to go.
Well, nevermind. But yeah, I'm doing what I can to find the stuff.
But uh, I mean they, they took, they took all the expensive stuff.
They knew what to go after cause all this is craftsman and everything that's
missing is all snap on Macco and Mac and like there's stuff gone from all my
screwdrivers except for one that was on the four wheeler and my snap,
all my pliers, my snap ring pliers. And then, um,
yep. And then Allen, Allen,
all my Allen sockets and torque sockets are gone.
So they left the Pittsburgh, they knew they left the Harbor freight.
Yep. This, this really, uh, really makes me,
it kind of,
it makes me want to make sure that I raised my son right to where if he wants
something bad enough,
he's going to work hard to get it and not want to steal it from somebody.
Cause you know, this is, this is upsetting.
This is how I made a living and it's all gone.
But luckily I got a good boss. He's going to keep me around. Don't worry.
We'll come back. It'll be fine.
Yep. So we're still, we're still checking around, uh,
to see what all is missing,
but it looks like they loaded all of Charles's tools into his tool bags.
They were just sitting around and they took the trailer and they left.
We think something might've spooked him cause like the four wheeler was sitting
right here. They had to literally walk around it.
We don't know why they didn't take any machines.
We're thankful for it,
but this drawer would have hit the four wheeler opening it up all the way.
So, yeah. And the air box was off. Yeah, that's it.
So I guess they just thought it was broken. Yeah.
So we made a police report there. I gave them the VIN number to the trailer.
Um, so between that and my home insurance, um, I mean the business,
the business can pay for a new trailer. I'm not so worried about that.
The main thing is that Charles tools are missing and this is,
these were his personal tools.
This is how we made a living and we use the heck out of these tools on a day to
day basis for working on stuff with the channel.
Good news is my granddad's tools are still here.
Like his custom made drill bits and stuff there.
They didn't take them cause they didn't look of any value,
but these are priceless to me. So that's all right.
There's a broken 10 millimeter. That's what they get.
So we're still trying to figure out what all the damages are. Um,
last year we did a collectible mini bike ornament around the holidays to help
raise money for Charles because right around then when his son was being born,
um, and we were going to do another one this year around the holidays,
but we're going to start him right now just so Charles can help get his tools
back or help pay for those tools again.
So we had this idea and that's collectible drag rail ornaments and they're on our
website, cars dash cameras.com.
Charles is keeping every dime of profit from these, uh,
cars dash cameras.com. Uh,
these are going to be 1999 and they're handmade all by Charles clear coated.
And then the painted one,
if you want to go that extra step to support Charles and thank you.
That really means a lot. Yeah. Getting, getting his tools back.
These are going to be a little bit extra and they're going to be painted just
like our drag rail, just as a way, if you want, you know,
to go that extra mile for him. I'm sorry for getting emotional. Uh,
it took me 10 years to pay for all that stuff. And yes,
everything was paid for in there and they got me,
but this ought to help me out. And thank you again. Yep. I want to say,
I really appreciate y'all. Yeah. Yeah.
The our saving grace is you guys, the audience right here. So just thank,
thank you all for just, you know,
tuning in throughout the years and supporting us in these lows like this.
Yeah. So I'm speechless right now. I don't,
I don't know what to say for anybody that buys one of these, you know,
thank you from the bottom of my heart. I really appreciate it. And you know,
you, you don't, I don't wish this on anybody. And you know,
I just think, thank you that we have some good people out there that may,
you know,
hopefully going to be willing to help support us and help us out with buying
some of these or whatever else we have on the website. Yep. I'm just,
I'm still a little bit distraught. I I've,
it's hard to process everything right now because every time I look at that,
it's just sad, but yeah, we'll get past it. Don't worry. We'll, we got,
we got some good content coming to y'all. So don't, don't worry. We're,
we're still going to be still going to be good to go.
Just a speed bump, buddy. Yeah. No big deal.
So I want to sell 250 of these these ornaments just so
Charles can really maximize what was gone. Honestly,
250 probably will barely cover everything that's missing if that.
But just, you know, the more you guys buy these,
the more that will go into Charles's pocket for, for placing everything that was
here. I mean, honestly,
this idea was so Charles could have an end of the year bonus for his family and
his child. So we were literally talking about this idea last week, just like,
yeah, whenever we get them ordered,
we'll start cranking them out and put them on the website. Yep. We didn't,
we didn't know we would have to, you know, move them up,
move them up ahead of time, but this, this might be our saving grace. Yep.
So these are all made to order custom made by Charles.
So it might be a week in between when you receive it and when you order.
Yeah, they do.
So 1999 plus shipping and then a 2599 plus shipping.
If you want to go that extra mile for Charles. Thank you. So again,
hopefully the trailer will turn up. I'm not too worried about it. Um,
but it's Charles's tools is, is the kicker here. Uh, anyway,
enjoy this episode back working on the princess cart, uh,
cars-cameras.com help support our guy here. Enjoy the episode.
On today's episode of cars and cameras, we were back working on Cinderella side
by side, um, working on front suspension today.
We have the front end of an old ATV we bought for 50 bucks,
chopped it off.
And now we're trying to figure out where to put it so that we have good wheel
spacing and also room for our feet,
which are going to have to go in there somewhere after we widen it.
So our four wheeler hubs don't match the wheels. These are off the Bronco.
We're using them for testing purposes.
So we're going to make a dual lug pattern Bronco wheel.
And the way we did that was put some paint on the studs cause we can't get the
studs out.
It's going to wobble just maybe a little bit.
No, that's why it was suspension, man. Yeah. It'll be fine.
But that worked. And you know, look, we didn't have a paint brush,
so we used a shop rack shop rack that is eyeballing on a budget. Absolutely.
I was racking my brain yesterday on how we can accomplish this steering without
bump steer. And then it hit me steering rack.
So go powersports.com has a steering rack and pinion kit comes with you.
Joints comes with a steering rack, comes with the tie rods,
comes with a steering wheel.
It has saved our tails so many times in the past on our other builds.
I'll link it in the description down below.
If you want to check it out for yourself,
we're going to get these drilled, get it mocked up and we'll check back in.
I got an idea.
A swivel seat to get in and out that one. Ejective seat. Oh,
cause are we going to put it on your butt and then get in?
I was going to get in this thing and then sit down.
Yeah, we got our suspension mocked up.
We're still not sure about track with steering placement,
control arm placement and camber angle.
Just still trying to fit ourselves. Keep it stubby.
Keep packaging tight and efficient. I will say so far,
this is going a lot better than I thought it would.
Really? Oh Lord.
I mean we can chop the rest of this out and then just add that led bar up a
little bit higher. You want a steering wheel? Yeah. There you go bud.
Now you got the full effect and man that makes steering a piece of cake if we
had to go up with it.
That part that we've got from go power sports is we'll dang near make it
anywhere.
So are you comfortable with where your feet are? Legs? Not bad.
Not bad. As long as we can make a top shock tower that goes across and you can
still get your feet in and out.
Yeah because it may have to hoop like this kind of same kind of angle right
here so we can kind of follow it and we can brace it with the roll cage there.
Yeah. From dude, I really like where this is going up from here.
This is so freaking cool.
I moved too fast. But um, did we say, are we doing XO cage?
Either XO or one of the two. Not sure yet.
It's kind of an interior cage.
May make it a little harder to get in and out like we'll have less room in here,
but it'd be so funny to have two circles in here with a roll cage.
But so let's see. Yep.
Make sure you can still steer it.
In all honesty,
we're about four to six inches wider track width than we want it to be.
But I think this is all we have. If we shorten the control arms more,
there's going to be even less room for your feet. There it is. And the shocks.
Um, so I think this is what we have.
Can't go straight up. No, can't go straight up and down. Yep.
Got to lean them in. So, uh,
this engine, this vehicle is getting too small block like Honda clones.
Long-term we can always replace that whole rear section and put a bigger engine
because I think this can, the way this is being set up, it's heavy,
but it looks like it's going to be very durable.
So it can handle 50 horsepower or something like that.
The jump. Yeah. We have some ideas for our front end.
Don't know if they're good or not yet. We're going to find out.
We're going to go ahead and get this thing built and show you what's in our
brains. Uh, we got the steering tacked in,
and I think we're going to need to shorten our joint here, but look at that.
Both wheels are moving at the same time.
Oh, it's got my leg hair. It's all right.
Oh, the rubber boot pinched it. Oh boy.
So we have a steering quickener we can put on here if we want.
So we don't have so many turns, but we're going to see what it's like as is.
I fit like I'm swimming in this thing. Hey,
we just got to hope that Charles and I fit like Cinderella and her glass slipper.
Yes. Just the perfect fit. Oh,
this is so cool, man. And we are going to have,
we set up the shocks or the control arms that they have about five,
five and a half inches of travel,
which should be more than our shocks can handle.
We have these brand new go power sports shocks.
These when they're standing straight up and down have about two and a half to
three inches, maybe more. I'm not sure. I only tested it for that amount.
And of course, once we lean them in, uh,
they're going to have more travel.
And then also because they're in from the wheel,
we're going to have more travel at the wheel as well.
If that makes any sense at all.
So if the shocks have three, we might be looking at four,
maybe four and a half, um, on the control arms and the control arms.
Aren't actually the limiter. The limiter, uh, are these, um,
the balls in our, um, rack and pinion.
So we got to make sure set up a bump stop if we have to,
so that we don't destroy this rack and pinion. But so far I am,
I'm loving it, man.
Next is shock towers, right?
Yeah. Now we got to figure out shock towers.
We want to keep with the rounded theme. We need to make sure it's strong,
but I would love to have a rounded shock tower.
It gives our feet more room to get out.
We can tie in with the roll hoop that's either going to be on the outside or the
inside of the body here. Uh,
and then we can go forward around and down to make a protection for our feet as
well. So I want to see Charles, you got to sit in this thing.
You just want to see me do this with my boobs. Don't you?
I really do. I really do.
And we have our steering rack set up so that it's almost the same height as the
control arm mount.
It's more or less in the same pivot point as well,
just to minimize bump steer. We're only looking at five inches of travel too.
So bumps to your should be minimal.
It looks like you're making it work though, man. Oh yeah. I mean,
cause we already talked about having maybe to trim this out and we'll just make
a new one. But, uh, I'm ready.
I'm ready to go from fifth to first again.
We found out that our, um, steering arm on the spindle is bent,
but it was cheap. Yeah. I mean, ATV was cheap.
It was well worth the $50. Yep. So we can chop it off,
uh, build some new steering arms so that we can have tighter steering,
add Ackerman, all that stuff. But we can do that later on.
Next step,
we got to figure out where the tops of our shocks are going to mount so we can
figure out the angle that we want,
which is going to determine stiffness and the amount of travel we get at the
wheel. So we're going to try to rig something up. That's not permanent,
but that's more permanent than that. Something that will allow us to, you know,
bounce up and down on it and figure out our travel spring rate.
That ought to be enough. We're ready for a test. Yeah, I think so. I mean,
if they, if it pops a tat, no big deal. Yeah.
We just know it needs to be a little bit stronger.
We we've made this so we can remove this. We don't,
we only built it just so we can see if our suspension works and we don't pop
one of these. Uh, what is it? The inner, the inner tie rod knuckles ball thing.
Yeah. I, I guess a ball, it's a ball joint basically, but yeah, we don't,
we don't want that to be the actual bump stop.
So let's see what I'm going to keep my gloves on.
It's stiff. Seems a little stiff, buddy. Holy Toledo.
Yeah.
Okay. The shocks on this loose is sitting both of them. Yep. All right.
Is it even moving at all? I can't keep it from, I can't keep it. Yeah.
What I will do. Yeah. How do you want to try to test that?
Well, I'm going to try and lock the wheels,
which I don't think this is going to work.
Chalk them up. Yeah. It is still going to pivot. It's still going to pivot.
I think, but I'm trying, I'm trying to hear
that seems like a bad idea. It's going to be dangerous. Yep.
I might need a hand. Yeah. Yeah. I mean,
it's moving just a little bit. I mean, these bolts are not,
they're hand tight. Everything's hand tight, so it shouldn't be anything.
It's not binding or anything.
So we're at a point now where we can cut out the mock up upper suspension mount.
We have these pieces tacked in and they look like really sharp.
I love it. Yeah. It provides plenty of room to protect our feet.
A little bit of a crumple zone up here as well.
And we're also going to mount these tabs that I cut out with the Crossfire Pro
right about here. And that's how we're going to attach our shocks.
So this temporary thing is ready to go. So I'm going to cut it out.
Can I remove this? Oh, absolutely. Yep. Now that it's tacked,
I just kind of had that as a wedge. Yeah. It's really wedged.
You just said it. Wow. I cleaned that up. Huh? I did.
Hey, get a look at it. Kicking everything.
That's pretty cool. I really opened that up. That's cool. Yeah.
Like legitness. So we can tack that right there. Yeah.
Make another one. Yeah. Yeah.
Sweet. I'm not sure how square this thing is going to be, to be honest with you.
Uh oh.
Ike is coming by this morning to check out the progress.
He has no idea we're building this, so his reaction should be pretty good.
I hope he likes it. Oh my, you got it.
You said no. And I said, okay, I'll do it anyway. We'll head on in, man.
What color is it? You know what color it is. There's two colors. Oh,
we didn't get the pink one. Oh my God.
That's like three and a half days of a lot of work right there.
I'm actually impressed. Thanks man. It's, uh,
it's eight inches wider than a dingo in the front,
which is way bigger than I wanted.
That's why I wanted to talk to you about kind of the plans and stuff is just
kind of tacked in.
But the upside is Charles fits like a glove in that thing and he's six foot.
I'm going to have to look for another job.
Y'all are doing pretty good.
All of this is just,
and this is literally just to figure out suspension geometry.
They probably did and are wondering if I'm going to kidnap them and put them in
my basement or something.
It's a lot roomier than I thought it was going to be.
It is. We had to, we, we spent about a whole day cutting, fitting,
sitting in it, cutting, fitting, sitting in it.
So you're making a two seater? No, no, no. Single.
Okay. I'm like, why is the steering wheel so far? Oh, Oh,
it's literally just sitting there. Oh wow.
You can try to use that steering wheel. I've impossible, but maybe we can,
maybe we can make one out of metal like it. Yeah.
That would be good. I'm not really sure what happened here.
Maybe it's sat in like a position all weekend.
Well, I think it relieved so like,
you know, it's plastic, it bends. Yeah, it probably happened.
So the plan is something like that. Of course,
like we were going to bend some tube and stuff and get, give you more foot room.
Oh man. I wish I brought the bender today. Oh, the roller. Yeah.
That's why I wanted it cage today. Uh, not necessarily. Yeah.
But I wish I brought it today. Y'all are going to be working on this.
This will go underneath here. Okay. I can see that. Um, and then, yeah,
there's like actually like a ton of head room in here. I see that. Um,
are there doors? There are doors. Oh yeah. Yeah. Yeah.
We were thinking about building door bars though, or per part of,
per part of the cage for part of the cage. Um,
but we have very, very minimal bumps here, which is really cool.
That's awesome. Um, five to six inches of travel,
which is way more than I thought. Right. And wanted. Um,
and there's lots of room for activities.
The weird part is the bottom of your butt here is flat flush with the bottom
of the frame. Your feet, as you can see, are elevated,
but it's comfortable. It looks comfy. Yeah. Do you want to try to sit in it?
I'm going to say no. Okay. Ike approved. He really liked it, man. He,
he said it's heavier duty than we needed it to be,
which is we kind of knew going into it. Um,
but rather be too heavy duty than too light duty. Uh,
we don't want to bend the frame going off of a bump or something. Uh,
we're going to get a little bit more done on this front suspension before we
end this episode. Uh,
Charles bent up some tubes and we're going to mount our permanent shock towers
and begin to build some,
some door bars as well that are going to run the length of the frame to the
roll hoop. So, uh, let's get tacking and uh, welding.
You know, I just keep kicking everything. Yeah. That top has got to be removable.
I think we're going to come up with something. Moment of truth.
The seat is not having an unbolted seat really messes with you.
It does. I'm not going to have these boots on. Don't worry. Shorter shoes. Yeah.
That's good. As long as we can get this, um,
this out of the way, we'll be good for our legs. Good. Yeah.
Cause I'm my, my shins are on it,
but we're going to create a dashboard about this high,
like the bottom of the tubing right here that connects with these bars right
here. And then we'll help hold the steering.
Yep. I think that looks pretty darn good though. Yeah. Of course or not.
I mean it's got, you know, barely tacked in and stuff.
Someone that's got five minutes worth of a tubing bending experience.
I mean, and it shows adult, you know, but uh, so yeah, this isn't too bad.
I'm used to just putting go-karts and mini bikes together, not building them,
not building the full thing. So this is, this is cool.
So that's it for this episode of cars and cameras.
We got our front end straightened out, uh, figured out steering,
very, very minimal bump steer, about five inches of travel limited by the shocks,
which is right where we want to be. It should be good and strong,
somewhat lightweight. Um,
next up we need to figure out our seating position and begin to build the
dashboard, but we're going to save that for next time. One final thing.
I just wanted to say thank you to everyone who entered our cars and cameras,
custom wrap toolbox giveaway last month. Uh,
it's been a big help for all the t-shirts and stickers,
all the orders that were placed.
It'll certainly help recuperate our losses, uh, with the recent theft. Uh,
we pulled Tyler's name from Maryland, uh, out of the hat on Instagram live.
So Tyler, we're going to get this puppy shipped off to you. Uh,
most likely tomorrow it was going to happen today,
but with all the theft stuff, it's going to have to get pushed off tomorrow,
but, uh, we're going to do another giveaway sometime soon. But, uh,
thank you again for everyone who entered and Tyler,
you can have a sweet one-off toolbox coming your way. Uh, these are also all of
the, uh, all the trophies Charles just put together for mini mayhem coming up.
So mini mayhem is this weekend, October 21st,
22nd and 23rd of 2022 at Busco beach, North Carolina. Uh,
you can find more information on our Facebook page. Every year we put together,
uh, trophies out of like past parts from our projects.
So here we have old spark plugs.
We have the old driver off of the seven 80 torque converter that we blew up on
our drag wheel. Cause it was making too much horsepower.
We have an old six and a half carburetor,
a lot of old chain and these, uh,
trophies are going to go out to different groups.
So the person that traveled the farthest to be at the event,
you have the person who had the most Epic breakdown, uh,
and so on and so forth, just like we've done in the past. Um,
looking forward to seeing everybody this weekend at mini mayhem. Uh,
you can RSVP and find more information again on our Facebook page at cars and
cameras. And, uh, thank you all for watching. Uh,
be sure to, uh, pick up some drag rail ornaments, help support our guy,
Charles. Um, everything is going to be fine. Just kind of a bummer.
We got a lot going on, especially with it being mini mayhem prep week and now
this. So, but thank you all for your support. Thank you for tuning in.
We'll see you next time.
Grasshopper eyeballer.
