Bowhunting How-To How-To Get More Distance From Your Setup LancasterArchery.com

The Precision of Crossbowry
1 follower
May 27, 2026
Bowhunting How-To How-To Get More Distance From Your Setup LancasterArchery.com
AI Generated·May contain errors
Video Summary
AI GeneratedThis video provides practical tips for archers looking to extend their effective shooting range and overcome sight housing clearance issues. The presenter explains how to gain more distance through arrow selection, sight positioning, and peep sight adjustments to achieve a flatter trajectory and better clearance.
Comments are disabled for this video.
Okay, so with
Long range archery becoming more and more popular these days, you know with the total archery challenge and other 3d events out there
and hey folks just
Wanting to extend their range. It's a lot more fun to shoot something at a hundred yards than it is to shoot something at 20
Let's be honest here
What people are finding is they may not be able to
Shoot as far as they want to because they're running into issues of clearance with their sight housing
They bring in their sight down and then it's hitting the arrow, you know at say 90 yards and they want to shoot 110
How do you get more distance out of your setup? So I've
The first and simplest option is to check your arrows
So I have four arrows right here all Easton's. I got a full metal jacket
I have Easton axis 5 millimeter
I have an axis 4 millimeter long-range and an Easton sonic
So these are all 300 spines
But they weigh very differently the full metal jacket is 12 grains per inch
The 5 millimeter is going to be 10.7 grains per inch
My 4 millimeter is 9 4 and the sonic is 8 8 so
simply, you know changing from the full metal jacket to the
Sonic I've cut about 4 and a little over 3 grains per inch
Over the length of that arrow, so that's one way to gain more
Distance is you're basically gaining arrow speed, which means you have a flatter trajectory
So next thing that you may want to try is most sites are going to have multiple
Options here for mounting your site and you can see here. I have the site mounted as far away as it can go
The more you bring it in the more distance you're going to get from that site
So if I took it from this position up to this one
I'm gonna definitely gain some yardage. You've got sites that are mounted on dovetails
Just bring that dovetail in again
The closer you get your scope to the riser the more distance you're going to get from that scope housing
And then lastly we have peep height
so to gain distance what you'd want to do is to move your peep up and
What's going to happen is as I move my peep up. I have to move my scope up
So now but what you don't want to do is drastically change your anchor point. So I cut off the top tie here
Just to show you how much of a move you can make
without affecting your anchor
so right now my peep is
Situated to where I can clearly see everything in my site at anchor
So I can still see my full site now from this position. I'm gonna move it. I'll move it up. I
Don't know quarter of an inch
Check it again. Come to my same anchor. I
Can still see all of my pins now, of course, I would have moved my scope housing up
So that would have gained me some distance. Let's move it up a little bit more
What I don't want to change is my anchor
So I come in my knuckle is my guiding point. I
Can still see everything I can still see through my peep and see this when you're gonna notice
That there's a problem when you've moved it too high is you go up you come to anchor and you're seeing the bottom of the peep
That's when you know, you've moved it too much. You don't want to unless you want to change your anchor
You want to bring that peep back down again that you've passed the maximum point
So those are three ways the three things that you can do, you know
If you did all three of those together, you're probably going to gain some serious distance
