What's up YouTube it's jjay bearded barber! I am back with another haircut tutorial! This is a step by step Textured crop fade! It is a great style for low maintenance along with if you're having a receding/maturing hairline this style can help with that. If you have any questions drop them down below! Thank you for the continuous support! Please don't forget to Subscribe!
Please like, comment, and subscribe to the channel if you haven't yet. I will be doing a Ps4 GIVEAWAY at 1,000 subscribers! Let's keep growing! Thank you all for your support!! Follow me on IG: jjay_bearded barber Beat by: @tnersy
Clippers used: Wahl 1919 with Philthy_Blendz Andis Master Blade Mod Topz fastfeeds Gammaplusna Absolute Hitter Trimmers Barbernova Red Almighty Shears Use "jjay10" to get 10% off your order with Gammaplusna.com or barbernova.com
What is up YouTube? We're back here with another tutorial. I'm cutting my boy right here, Sean Cutts.
I'm gonna give him a fresh ass fade. I'm gonna give him a little crop top action on top. We're
gonna trim up the top, texturize it, and walk you through on how I do all that, all right?
So this is the before. He's about to get barred up. All right, so always when you're first starting
you want to go ahead and comb through the hair. Make sure it's all laying out flat and even.
And then first we're going to start off with my Oster Topaz completely closed and we're taking
it right above the C-cup. We're going to follow that old way back. We're going to do a little
drop fade and we're just going to follow that old way around. We're going to go back on the other
side and just connect it with the back. These are my Filthy Blends mods. It's actually the
Andy's Master Blade on there, so they're pretty dope. I'm using a number three guard right here
and I'm just going to kind of clear off some bulk. Going off the head as well. I'm not digging in or
anything like that. As you can tell, I'm coming off the head. After this, we're going to do blade
open and we're going to go up about a half inch. So we just, right before this, we did
blade completely closed and now we got blade open. So when we come back to take out that line,
we're just going to have to go in between, all right? So next we're doing a number one guard
completely open and same motion coming off the head, blending into that three. Pretty much here,
we're just trying to line up that line so that it'll be easier when we're coming back with our
half guard. So right here, I'm showing don't dig in. Don't dig in like that. You want to come off
of the head, okay? Coming off. And right here, I'm just showing that his hair growth pattern is
slightly coming at an angle. So when I'm fading, I got to go at that same angle just so I can make
sure I'm getting an even cut. So next we're going to be using the zero guard on the Andes fade system.
Completely open as well and same thing. We're just pretty much trying to line up that line,
all right? So we're going off the head and we're going to work our way from completely open to
closed. This is more of an advanced technique. I wouldn't recommend this for beginners because
it's more shading compared to putting in guidelines and taking out guidelines. This is more of blending
down. How I do this, I usually do like to put in, you know, the clipper closed and then clipper
halfway open just so I know that's the last line I have to take out and after that, blend down. So I
went, you know, blade closed, blade open and then I went, you know, the three guard to the one and a
half guard to the zero guard and then I'll go back with the two guard and just touch up. Also here,
I'm just showing, you know, using the corner of the blade, really using that part of the blade to
blend because if you're using a full blade, you're going to just put in guidelines
and it's going to be more difficult, you know, to really get a nice transition fade.
Now we're completely closed and you can tell that the fade is pretty much done but there are just
some light spots or dark spots in my bed. So now I'm coming in here with the two guard,
same thing off the head, just kind of lining up those dark spots that I see.
Now we got that final last line that I put in originally and I'm going to use my
filthy blends mod to go ahead and take that out. Pretty much all you really have to do is have the
blade halfway open and that will take out that line but just to be safe, I start completely open
and then I just slowly work the lever down to completely close. So I'll start completely open,
halfway and then completely close. The next step after this is obviously just bolting them out.
So I'm going with my gamma trimmers, bolting them out, going right below where I left off with my
clipper closed, just to make sure, you know, it's nice and tight and that the fade, you know,
has a nice transition. Make sure to dust off your client and then come in with the shavers. I'm going
to go ahead and show where I left off last. So, you know, around there is where I left off with
the trimmer. So I'm going pretty much up to that line. Once I get there, I'm kind of scooping out
so I don't make a harsh line and then this side of the head is done. And then we're going to
repeat the same process in the back and then on the other side. Right here, I'm just taking a
section, top of his head, kind of where his head bends, you know, where the parietal ridges. I'm
just going to do a little bit clipper over comb, keeping it straight off the head, not pushing in,
not doing anything like that, keeping that shape squared. And this will set up, you know,
make it much easier when I come in with the scissor work later. As you can see, there's a
bit of dark spots right there. So I'm just going to go over with some scissor of a comb and just
line up those areas. This is a great technique. Usually scissor comb is to really line up spots,
but not take off too much bulk. Now, you know, line up the vertical bars, not trying to push
it in or anything like that. Just trying to get a nice line, nothing too crispy or anything like
that. He is a little bit lighter in those areas. And this, you know, it's going to be the same
steps on the back. Three guard first, now blade open. We're going to connect that to where we
left off on the right side. The next step, one guard coming off the head. You guys try following
along. I'm going to go ahead and stop talking and give me a like for the beats. My boy Timothy,
my cousin Timothy, he's been killing it with the beats. So go ahead and drop a like for him.
If you want to go ahead and follow him on Instagram as well, his name's TNursey.
I have him down in the description.
I really enjoy fading this way. Lately I've been fading this way. I've been putting in the ball
guy line and I'll put in, you know, the blade open and then fade everything down and then just
attack that bottom line. I feel like it's very simple. I don't know if it's just over experience,
but it's very simple to me now. Cause all you have to really do is do blade about halfway open
and just attack that line, bring that up. And then ball line, ball line is pretty much gone.
Then after that, you just follow up with your trimmer shaver, and then got a pretty blurry fade
and just, you know, make sure to always use corners. Don't dig in. And you know, repetition
is key, especially when it comes to cutting hair. You got to always cut hair. You got to make sure
you get different hair textures, um, different clients, everything like that, because the more
you cut, the better you will become. Um, I've been cutting for two and a half years now
and not until about two and a half years to three years. So not about until two to two and a half
years of cutting is really when my fades started getting to the next level. So it takes a lot of
consistency, a lot of cutting, and just be patient, find some type of faith technique that
you like, and just stick to that for about two, three months, really master that even a year,
just really get that mastered. And after that you can start doing different things. You know,
sometimes now when I started doing my haircuts, I start with, you know, just clip over comb and
then use a one guard to fade right into that. And then ball guideline and the fade from the ball
guideline to the one, um, before I used to really put in just guidelines just to make my brain
understand what I'm doing and understanding shaving and understanding what a one guard looks
like on course hair, what it looks like on, um, fine hair. And then once you do that over and
over your brain starts to understand. So now when you look at the head, you'd be like, Oh,
that's like a one and a half. Oh, that's maybe like a two, but it's always better to, you know,
we start with blade open, start with a bigger guard, bigger guard always so that you don't
take off too much. And then, you know, same steps on this side, as you can tell if you're
following along, sorry, we're on a little rant there, but you know, same steps besides really
sped up just so you guys don't get bored watching me do the same thing. But see, as you can tell
before I even really went to the, to the blade open with my, uh, wall guard, my wall clipper,
you could tell like the line was barely there, you know, on the back, you can see a little bit
more because the back of the head is usually more dense, but as the side, you know, you could
barely see a very faint line and you just kind of work the corners and that line disappears.
If you guys do want me to make certain videos using different fade techniques or, um, something
you guys may be struggling with, struggling with, go ahead and comment below. Um, I'm open to new
ideas. Maybe you guys want a more in depth, um, step-by-step tutorial, like, you know, putting
half the half guideline and then putting the one guideline and then putting the two and then
learning how to play, uh, figure that out. I can do that. Um, if you like just seeing my
techniques, I could go and just keep doing that. I have a lot of different ideas I have for content
coming out soon. So just be on the lookout for that. I'm going to be dropping a lot more content
on YouTube. I'm really trying to grow my YouTube channel and really want to give you guys as much,
uh, value and as much information as I can, because, you know, I was like, like everyone
else, everyone starts in the garage, you know, beginning barber, um, having a whole bunch of
questions or don't know what clipper to use. All that just comes in time. You just got to trust the
process. Just understand that you have your goals and know where you want to be at, you know, in the
next year, in the next two years and just work daily, you know, put in the work and the work
will reward you. So we're just lining up the side as well. Nothing, not pushing him too back or
anything like that. Just making a nice line. I'm going to go ahead and hit him with enhancement
just so he looks extra good, extra crispy for the day. When it comes into putting enhancements, um,
just mainly want to tap the trigger. So the top of his vertical bar is darker because we left that
part longer. So you want to make sure that part is darker and it gets lighter as it gets to the
bottom of the vertical bar. So it has a nice shape. So right here you could tell, um, the bottom of
the vertical bar is a little bit darker compared to the top. So I kind of brush that out and then
I kind of hit the top of his vertical bar a little bit more right here, just so it has an even blend
and I always follow up with the razor after. Get it nice and crispy. I will be dropping my JJ
Bearded Barber razor soon. I'm just waiting on the shipment, but be look out for that.
Now we're moving on to the top of the hair. Make sure to nicely saturate the hair,
because you don't want some spots dry, some spots wet, uh, just make the cut uneven. So now I'm just
looking where the bend of his head is. So I put the comb on top of his head, bent it, and that
will be where my first section is. Same thing on the other side. And then now I'm just going to
connect the sides to the top, doing block graduation, keeping my finger square to the head.
I have another angle coming in right here. My boy was sweating in the chair. Look at him. He's
sweating right here. So go ahead and just pull that down. And then you want to just cut all that
excess hair. So you can see the separation from where the clip over comb was and what the top of
hair is. So we're just connecting all that, following that around the head. I did just take a
hands-on course with Sharp and Dapper in Stockton. And that was, that was just this past week. This
video was recorded a while ago. So my scissor game wasn't that, wasn't that strong, but it's not too
bad, but it's something definitely to work on. So that course really helped, um, with just education
and learning. So you always got to be taking, um, education serious. You got to take continuous
courses, you know, learning new things, learning from other barbers that are, have your strength,
have your weaknesses that you can learn from them. That is their strengths. So scissor work is one of
my weaknesses right now. So that's what I've been really trying to take serious to get my scissor
work really good. So right here, we just took another section in the middle, two fingers width,
and we're just following that straight back. In the front, I kind of dipped it a little bit. So
I had more of a round shape, so it's not too heavy on the front. And just follow that all the way
back. And now brush it all to the side. And now we're going to be taking horizontal sections. So
the first one was a vertical section. Now we're taking a horizontal sections and you can see where
the short hair is compared to the long hair. And you're just going to cut all that, make a new
section. Just follow that backwards all the way until you get to the back of the head. So you
pull it up and now you can see what's long, what's short, and you're just going to cut all that.
And once we finish this side, we're just going to pretty much come all the hair forward.
We're going to do the same thing on the other side. So you can see all the long hair.
So now I'm taking another section, I'm pushing that to his left side. I'm going to do the same
thing on that side. When it comes to the scissor work, it's, you know, just having clean sections,
good tension, and don't go anywhere past that second knuckle. And now I'm just making sure
everything's even, you know, connecting both sides together. Everything looks pretty even,
just cutting whatever is excess. Come back over with some clipper or a comb, whatever I see. I
held the comb at more of an angle that time, just have a nice transition. See right here,
you can see the comb's a little bit more angled. So I'm angling that comb so I could go from short
to long. And then for his bangs, we're pretty much just cutting the little flyaways, nothing too
crazy. Just cut all the excess hairs that's hanging over. And right here, this is a technique,
you could just pull the hairs up with both of your hands and just to see if it's even. As you
can tell, both sides look pretty even to me. Now I'm spraying in some sea salt spray. This is just
going to give him some more extra texture, some grits feeling to his hair. And then now we're
going to go ahead and do a little bit texturizing with my chunker shears, just going in there,
kind of adding some texture in there. And I'm also using the sharpened dapper
volumizing powder. Make sure to pull the hair back and get it really in the roots so you get
that nice texture look. If you just put on the top of the hair, it won't get in the roots and
won't give him that volume. We're just going to apply that throughout the hair. I'm going to go
ahead and clean up his facial hair. Went from his jawbone on his chin, pull that to the sides.
And then for the vertical bars, we pretty much went from the outside of his mustache right there
and just brought that all the way down. We did that for both sides. It's a good way to target
or a good way to check, you know, if it's symmetrical or not. Now we're using some
texture spray, hairspray. It's not really a holding spray, it's more just texture.
Just doing some little details, kind of pushing those separate hairs away.
Using my styling comb, just add some more texture, doing a little detail work with my scissors.
This is just point cutting, just taking some dark spots off. And that's pretty much the cut, guys.
This is just some extra detail work, you know, make sure everything's even. Always put that talc
powder on on the bottom of the fade where the bald guy line was. Just add some definition,
some transition, and that's the cut, guys. Let me know what you guys think. I think it's super blurry,
fresh fade, good drop in the back, some texture on the top, you know, something a little different.
This technique, I mean, this style is definitely coming in. Let me know what you guys think. Make
sure to subscribe, like, comment, share it. Let me know what you guys want to see next.
I'll see you guys on the next one, right?