Ratchet Strap Storage Trick!

Dave Does Carpentry
1 follower
1 Video View·Nov 19, 2026
This is a quick video on how I store my ratchet straps when I am not using them. This keeps them tied together, organised and ready to use without having to worried about the strap being tangled.
It is also a very quick method which requires nothing apart from the actual strap
Have you finished using ratchet straps,
took them off and tried to work out the best way to store them?
I've seen way too many impractical ways people tie
their ratchet straps together
and a lot of people who don't even tie them together.
That's why I'm going to show you an easy,
organized way to tie your ratchet straps together and store.
Alright, so firstly you're going to grab
your ratchet and close it up like so.
Then you're just going to get the hook from the ratchet
and sit it up on top of the ratchet like that.
Then you're going to grab your actual strap,
get the hook from the strap,
And marry it up, sitting it on top of the hook of the ratchet.
And then once you've got those together, you're
just going to hold them firmly so they don't
fall apart, and just start winding your strap around
and tying everything in together.
Once you've done all that,
and you've got about 300mm of your strap left, what you're
going to do is stop there, pinch the strap,
holding everything together, and then start
wrapping it around, not long ways,
but width ways, to really hold all that strap in.
You do that and then when you're almost down, almost at the end,
all you're going to do is make sure you just pull the strap back up,
thread it through underneath, pull it tight and there you go,
there's your ratchet strap, you've got it stored, it's nice and easy
and then when you go to use it, you can easily just pull it out,
pull that little strap back out from underneath and it's not tangled,
it's easy to use straight away.
