These are my favorite compact and subcompact tool kits I’ve built, customized, or modified throughout 2026. Some started as complete kits that I adjusted to better suit my needs. Others came together piece by piece, combining tools and organizers into a setup of my own.
This lineup includes my two Klein builds, two Wera builds, the ICON meme kit, and more, along with the Railer bit rack. The focus is on how everything works together: tool selection, organization, accessibility, and useful capability in a compact package.
Sometimes a few changes can make an existing kit work better for you. Other times, building from scratch lets you choose exactly what earns a spot. These are the setups that stood out to me this year and some ideas you can borrow for your own builds.
If you’re shopping for yourself or looking for a practical holiday gift, the original build videos and associated gear links are below so you can take a closer look at the individual setups.
Which kit is your favorite? Do you prefer a ready-made set, a few modifications, or a completely custom build? Let me know in the comments.
Some links may be affiliate links. If you purchase through them, I may earn a commission at no additional cost to you. As an Amazon Associate, I earn from qualifying purchases.
Subscribe to The Reasonable Gentleman for more practical tools, custom kit builds, everyday carry gear, and ways to get more utility out of what you carry.
We are back with another review
and today we're gonna be checking out some of my favorite toolkits
that I was able to put together during the 2026 year.
So without further ado let's hop right to
this review. Today we're going to be checking out
a scatter pattern of utility if you would. So
Starting it off, let's go with the Icon Meme Kit.
Obviously, we did the modified version because, again,
most of the stuff today is either going
to be pieced together or modified kits.
Flashlights.
Flashlight, full Klein socket kit, SAE, metric sockets,
full-bit kit outfitted with all the stuff that I would normally need
in regards to bits.
It's the Knipex Mini Cobras here.
With a sheath on the back, so a nice little pack out,
and it sits nice and flat.
Thank you for that.
As far as subcompact toolkits goes,
I really think this is a very, very high contender, if you would.
It's got a ton of utility in that.
I don't think it's missing anything personally.
It's got the grippage covered. It's got the
illumination covered.
It's got the fastening covered on multiple fronts. It even has some
impact rated sockets in there if you wanted
to use this kit for something
as a pairing with like an impact driver.
So yeah you could even like I said you
could even take those bits if you wanted
to and put impact rated bits in there.
So, that being said, that Icon Meme Kit is definitely something
that I enjoyed putting together this year.
The next one is the German-inspired Wera and Knipex.
I guess you could say, yes, full-on,
mostly German, minus the case, the outer pouch.
So everything else in here, though, is that.
I ended up doing the tool check with this one,
which I removed the rails, which I like as well.
We're running the 813 in here for the fastener driver.
Let's push that out.
There's the 813.
It's got the ratcheting end on it, of course.
Precision over here, a Torx No. 6,
and a nice precision kit from the modular Micro One.
Knipex Mini Cobras, adjustable pliers, wrench, some scissors, a Boker,
and a nice little German pen
and pad paired with the Ledlenser flashlight.
So this one is a really nice little pack-out precision toolkit
for me that I like to use, that I like to rock.
Um, this is an everyday use type of a situation.
It's one of those things where you open it up
and you work out of it type of a thing.
If you need to move it somewhere,
you can zip it up and transport it, but love working
out of this kit.
It's phenomenal.
I ended up getting a little side kit
from the scraps from the tool check.
So, uh, we got the 815 here,
flashlight from, um, Olight little mini.
Flashlight there. It sits right next to that.
This does have a quarter inch adapter in there,
but it's just a quarter inch screwdriver.
Here's our quarter inch bit rack.
We've got some hex keys right there. Torx slotted Phillips.
A really nice little consequence of cannibalizing the tool check.
But dang, I made myself a modular packout
that rivals most things that you see on the shelf.
So that being said, I thought that was a really neat little toolkit.
That was another custom one, if you would.
Let's hop into the Klein.
Uh, zone. Here's the new subcompact vessel that I chose.
This one is the clamshell. Um, love the
clamshell variety straight up because just like this toolkit,
I like to work out of the, work out
of the kits. I guess that's probably one
of my favorite things to kind of create is a work out
of kit where I can basically kind of take a scatter pattern of tools
and pair them up in a way.
Where once I kind of have them spread out, I can easy grab and go.
And I think that's what makes a good EDC toolkit
or just an EDC kit in general is how easy and readily apparent it
is to get access to the tools and kind of work out.
This is kind of a nice scatter pattern.
I was talking while I was arranging it, but
we got sockets, bits in this kit with a little mini ratchet.
We got a scribe marker with a pad.
Again, Klein doesn't make pads or pens pretty much.
So, you know, the writing is stuck at a
marker level right now, but we're good.
Well, they do have pencils, so they have the scribe pencil.
But anyway, we have the Klein tools.
Of course, everything in here is going to be Klein. We got
The little mini level magnetizer and metal stud finder,
four-inch adjustable wrench on the back,
which is nice. It's a good home for that little magnet
so it's not sticking to everything.
Pliers, we got the locking pliers, which is nice.
Knife-wise, we have the blackout. This one does
have a nice wire stripper option here. Let's open that up.
It's got a wire stripper option here on
this side. As you can see, I took the belt clip off,
so we got that put away. We got a precision
Bit carousel with the precision driver right here.
So regular bits, precision bits, sockets.
Really nice, useful kit.
Six-foot subcompact tape measure.
Love that.
Let's move into the 3D printing reamer here or deburring tool.
We got a stubby here with a little bit rack
with non-impact rated bits for that type of work.
Bit holder is right there.
We've got the heritage shears from, of course, you know who.
Here's our flashlight, laser.
It's even got a side beam on this.
So like I said, I love little subcompact toolkits,
and especially the kind that I can open up like that
and kind of just lay the tools out
and have access to all that utility at once.
It comes in handy, and that's how a toolkit gets used.
And for me personally in my house, that's how a toolkit gets used,
is how easy it is to have access to the tools
and how dependable the tools really are.
Like if I keep going into a bit kit for a specific brand that I buy
and the bits keep stripping out, like it's like.
Why would I, why would I use these bits anymore?
So it's a kit that just basically never gets used
at that point. So that being said,
stuff I'm sharing with you today are some dependable,
dependable tools. So speaking of dependable tools,
here's a little EDC style kit that I did with the
The holster comes with the plier set.
So this one comes with the Cobra XS, the mini pliers here.
You also get the adjustable pliers wrench in this kit.
But you get two little elastic bands on the side.
And I see a lot of people put some
pretty cool things in there for tools.
This one just ended up getting the Streamlight,
the MicroStream, and a Craftsman multi-tool,
which, again, you got the grippage covered.
You got the pliers covered.
Scissor driven multi-tool.
So we got a knife, you know, a little file, bottle opener, can opener,
pliers, not pliers, Phillips, flathead,
little precision Phillips in there. You even got a
little hook knife in here.
If you want to open up packages and stuff, little can opener there.
Neat little tool right here from Craftsman.
It's a scissor driven multi-tool.
Which allows me to kind of cover the tools
that aren't being worked on in the grippage zone.
So and that slides in real nice on that side.
Flashlight, same way.
Then the adjustable pliers wrench plus the XS Mini Cobras.
And that's a nice little pack out.
Put that on your holster.
Access to those tools.
Pretty cool little pack out.
I enjoyed putting that together
and I think that's a really nice tool kit.
Speaking of that.
Let's talk about the newest addition to the tool loadout zone.
This is my specialty bit rack,
which has been recently upgraded to the railer, the shorty,
the stubby, the short railer.
So no room for expansion on this,
but if I do want to expand it, I have the longer 10
bit railers as well.
So this is the five bit, which is a stubby, it's the half rail.
And on here, I got the 711L SOGgy, a little torque bit driver.
We also have LeBears.
Double-ended, we got the quarter-inch drive socket over here,
quarter-inch bit driver on this side.
It's a nice little compact ratchet
that has both built in, which is nice.
Over here, we got the pry bar slash little mini wrench
from PrestaCycle,
as well as the PrestaCycle brush, PrestaCycle pick,
and the PrestaCycle bottle opener.
So a nice little pack-out kit, all paired nice with a little railer.
This was one of my favorites to put together recently.
I love doing that.
I like putting together some nice little specialty kits,
especially some specialty bit racks that you can snap
on the side of pretty much any tool bag, tool box,
whatever you got going on, your backpack.
You can even just take off this lanyard
and just pack the rack out, which is nice as well.
Let's check out one more subcompact compact tool kit.
This was the Gein Zern, kind of like a 7-Eleven L rip.
But I thought it was, let's see if we can get in here.
See if we could actually get in the toolkit we put together.
It was packed and I don't actually remember what all I put in there.
So there is the toolkit itself right there.
So this is the Gein Zurn ratchet plus like four or five bits.
And I took the foam out.
And since the kit was so large, compared to like a 711L, which
is a little bit smaller, and I did that build last year, I didn't want
to kind of feature that here again, kind of rehash the same builds, but
In here, this is a kind of scatter pattern.
We've got a little mini pry bar here or nail puller.
Just something small.
Quarter inch magnetic bit holder.
I put in a DeWalt one for that one.
Then for the multi-tool, we have the Gerber dime.
Check that one out.
That one's the pliers, the wire cutters,
and the little needle nose right there, which is really nice.
And...
it's got a scissor module
so pretty nice little multi very multi here let's leave the scissors
out for now until we finish the kit
and i was kind of you can kind of see the illustrated
utility next up from Streamlight we have the Nano Light
which is just a tiny flashlight that
gets turned on once you screw it all the way down
to the bottom little this one is a pen
a little writing implement from Alpaca
so a super mini subcompact pen offering
Here is the Write in the Rain notebook cut
in half with a Ranger band on it so that it just
kind of fits in the case.
And then here's the kind of main event of the kit, which is what
we're holding out for. I got a little wee bit rack here,
but we got some, an outfit, I guess you
could say, of some new bits.
Philips 1, 2, Torx 15, Torx 25, or I should say Torx 20, Torx 25,
slotted number 2, and then I got
a little Wera quarter inch socket holder right there. And then
And on here for...
Extra leverage, I actually got
this little Milwaukee 2-inch bit, which could also work
here as well, but it also provides some leverage here.
So if you wanted to even go the extra mile,
you can probably, I mean, you could probably go all
the way down if you really wanted to get some
really nice leverage on this, but a nice little addition there.
It's got a quarter-inch magnetic
bit holder down there, quarter-inch magnetic.
Tees sound good there as well.
on this. So I wanted to feature it.
I thought it was a neat little tool in regards to utility. So
that being said, that is the Gein Zurn little mini tool kit
that I outfitted this year. I thought
that was a neat one to do.
And I thought that was a fun build for me personally. So let's put
together this little kit.
We'll get it all put back, hopefully in here in a way that we can
slide this shut. But, you know, we're going to find out, I guess.
After the video.
So last kit I put together this year
is a recent one as well.
This is a nice compact.
So I got a subcompact Klein and a compact Klein.
The compact Klein is in the double sidecar meter bag.
This one is part of a series of bags that they sell.
I guess they're made specifically for meters,
but I repurposed it and turned it into a nice
compact tool kit. And wait till you see all
the stuff that we got in here. Let's go through this
side first, which is going to have
my favorite tool of all time from Klein.
That is going to be the bar headlamp. This thing is a beast.
Charges back here. That's where the battery is. Here's a little tether.
This thing is a beast.
This is probably one of the best headlamps, if not the best headlamp
on the market, period. I bought all this stuff with my money.
So that's something that I
personally invested in.
I've been using that every single winter since I got it. So love it.
Can't talk bad about it at all.
So next up we got is some new titanium coated shears.
These are going to be my larger cutting implement
I have a smaller one in there.
We have the, what is this, 8-inch little Cobras,
for this particular build.
like Cobra style, I guess you could say, water
pump plier, but very nice, very, very nice.
It's a little bit of a larger tool,
but it fits perfectly in this particular pack.
Then we have the Heritage Shears,
which go with the titanium coated, so whatever I don't
get with these, which do cut through,
you know, cut through a penny on that.
This wouldn't be something I would cut through a penny on.
This would be like a multi-material type of a shear.
This would be something that I would probably not want
to get the blade all jacked up
by cutting something like a thick wire.
I don't know, I cut some like multi-material tiles with this
and it worked out really well.
And it would suck to have like that really like beautiful line
that this thing cut to have it jacked up
if I jacked the teeth up.
So gotta have both types of cutting implements
for me personally.
Here is the screwdriver handle for the Connect fastening kit,
which I do have in here.
I just don't use the screwdriver handle part the most.
That's why it's in this side with the larger tools.
So anything I don't get with the titanium shears or the Heritage,
we also have the straight-up regular Klein deployable little saw here,
which I got multiple blades.
This one is a multi-material blade.
It does wood and nails in this particular one.
So I like that.
It has that multi-angle.
Well, this releases the...
The blades for quick disconnect on that, and I like that a lot.
So if I was to change this, I would probably move the button to,
like, up here or something.
So you can kind of fold this down versus you'd be down here.
Do that.
You know what I'm saying?
But it's a cool tool from Klein,
and hopefully they keep this going, keep dropping some more blades.
I mean, they basically take resip blades,
and I think it takes jigsaw blades.
I'm not too sure.
I haven't tried a jigsaw variety.
Here's just a little mini pry bar slash hammer in here.
So just a nice little blunt force thing
that I'm using that and not something
like these water pump pliers to hammer stuff.
So having an option in there allows me to not improvise.
And that's important.
That's how you break your tools.
So now in the last little pouch here,
we'll go through this kind of a little bit faster
than the other one
because there's a little bit less things in here.
We have a laser and a flashlight option.
Nice to have both with the headlamp.
Little subcompact tape measure, just like the one from the compact kit.
Can't go wrong with a six-footer.
Always comes in handy.
We also have the brand-new knife offering from this summer,
I believe, is when this was released.
Bit driver, wire stripper, wire stripper.
It's got a sheep's foot blade.
Beautiful, beautiful knife.
Angular digital level right there.
Very nice.
To replace the bubble level style.
Let's do the Mod Box first.
Bits, we got the connect sockets in here
and all the precision bits right there.
So I like the precision bits laid out like
that so I can actually read what the bits are.
And I think that's important
for me personally versus having like the carousel.
When I do my precision work, I like having it laid out like that.
And it's cool to be able to just kind of have that out on the table
and see exactly what I'm trying to grab.
Underneath that mod box is just a non-contact voltage tester,
the NCVT3P, so that's the IP67 with,
it's got a little flashlight on it too, so pretty cool.
Like that one, and then the last thing in the pouch for my,
this is my last favorite compact toolkit for the year,
so the largest one out of all these.
So that's why we're spending the most time on it.
It's got to connect with the adjustable wrench.
So ratchet wrench.
I have dedicated ratchet here.
The deburring tool, we talked about that.
We do have the Klein pencil scribe right here.
We have the mini precision driver,
which goes with those precision bits.
We have the scribe marker.
Field notes notebook,
because we don't have a Klein notebook.
On this side, we got some zip ties,
a USB-C charging cable for the flashlight and for my phone.
And then we have the blades for the saw,
which I got a multi-material in there right now.
So pretty cool.
Like I said, this is my favorite compact,
subcompact tool kits that I kind of either bought.
And modified or just kind of put together this year for my general use.
These have been some tried and true tools.
I'll leave links to these things down in the comments below
so that you have access to all the tools here.
If you want to check them out for yourself, if you want to try them out
for yourself, and you want to let me know how they are.
These are some things I would stand by.
So, you know, minus the Geinser, and that's probably
the one I have the least mileage on out of all these tools here.
The Knipex kit, the Klein
The Icon, I would say, and probably
the Knipex probably have the most mileage.
But, yeah, the Geinzah has the least.
But it was a cool kit to put together, nonetheless.
Let me know down in the comments below, what do you think
of these little toolkits that I was kind of fussing with the whole year
and enjoying myself doing it and testing these tools out.
What do you think about these?
Let me know down in the comments below if there's
anything you cherry-pick out of these tools.
for yourself, your own toolkit.
Let me know that down there as well. If you like this video,
give it a thumbs up. Want more content like this,
subscribe for more, and have a great rest of your day.