Off-grid communication deserves a place in the EDC conversation. Today we’re taking a look at the Heltec V4-R8 EX—a handheld LoRa mesh node that combines a full-color touchscreen, built-in GNSS positioning, and a rechargeable battery in one compact package.
For me, this fits into a layered approach to communications: another way to exchange messages and location information when cellular service is limited or unavailable. Whether you’re building an everyday carry setup, organizing your field gear, or adding to your home communications network, this is an interesting piece of hardware to work with.
The 2.8-inch color touchscreen gives you a way to view messages, node status, and device information directly on the unit. The built-in Quectel L76K GNSS provides positioning capability, while the included 64GB microSD card adds storage for supported maps, logs, and application resources.
📡 COMMUNICATIONS & FIELD USE • LoRa mesh messaging • Location sharing • On-device message and node-status viewing • Portable field communications • Hiking and camping setups • Emergency preparedness kits • Everyday carry communications • DIY LoRa projects and hardware expansion
The listing references both Meshtastic and MeshCore; available features depend on the firmware and configuration you’re running. Map support, storage functions, and the touchscreen experience can vary with that setup.
Are you already running a mesh network, or are you looking at your first node? Let me know what you’re using and where it fits into your communications setup.
Subscribe to The Reasonable Gentleman for more practical EDC, off-grid communications, preparedness, and kit builds.
Hey everybody, we are back with another review, and today we're going
to be checking out a sweet little comms node from Heltec.
So without further ado, let's hop right to this review.
So today we're going to be checking out
this beautiful unit that was sent over by Heltec,
Wi-Fi LoRa32 Expansion Kit V2, V4.
It's got all the capabilities you could possibly want
for a nice little portable comms unit.
Now, previous to this, this was my main base node.
Which essentially is a paper, it's just a paper screen,
it's from Heltec, it's a paper screen that just displays all
the messages that come through on my private network,
and I'll show you that here in a second.
Now it also has a charger on the back, which is pretty sweet,
but me personally, I don't use it as a charger.
I just keep this thing fully charged.
It lasts like one to two months. It's got a paper screen,
like I just said, which eats up like zero battery.
It's like super slow burn. A couple weeks and
that's how much the battery was chewed down.
So you can probably get one to two months depending
on how much stuff gets displayed on the screen and kind of changes,
if that makes any sense.
That being said, this was the kind of mode I was in.
I was in basically read-only mode,
so I was only able to see stuff.
So if I was monitoring my network to see if there was any
type of broadcast coming through,
I would see it here and then I would have to go either to my
Thank
iPhone to pull up the Meshtastic app or pull up my Lilygos,
because that's what I was using these
before. But let me show you, I have two of these,
but let me show you kind of how these are all
They're all integrated now that I have them set up like this.
The Heltec one that came today,
you.
this unit is essentially the same type of a system like this.
It allows me to monitor my network.
It allows me to see things that come up on messages
or anything like that.
But it also gives me the ability to send messages out.
It's got GPS on it.
So let's check this thing out.
So it is fully touchscreen versus like the Lilygos
who do need these little keypads.
But I want to pull this up and kind of show you.
Let's do...
So, uh...
Go back here and we'll pull up this main channel
and then we'll put up a little test here.
We'll send that and we'll see it pop up over here.
So you can kind of see how it pops up
on each of these as well.
You have to go into there
and you can see it has a new message
and it came through as test.
Same thing over here.
And you can see it come through as test.
Lots of test stuff coming up on the screens
because I've been just running tests
and kind of getting this synced up with my network
and my communications grid.
So as you can see, they're all synced together,
which is super nice.
It shows me all the nodes in the area.
These are all the other people.
So 39 nodes is as far as this one will pick up.
You can kind of see all the different people in the area,
which is kind of cool.
All around Colorado Springs, you can see kind of,
well, I don't know, I don't think I actually
have the maps downloaded.
So that's actually something I do need to get in the system is
to actually get the GPS set up in this.
But playing around with just the comms portion of it
was actually quite easy to get set up across the board.
Just kind of putting this information in,
All set up with the firmware.
You just kind of have to, if you already have a comms network,
you just have to seamlessly integrate it.
I started off by just messaging my other nodes. I
have other nodes that pick up on the system.
So I have like, this is from Elecrow. This is just
This is just a straight up node.
So the different stuff that I have right now,
I have an Elecrow actual home base node,
which is a solar node that's mounted on my property as well.
So I have little trackers and stuff like that.
I think I've showed them off in my off-grid comms video.
The only communication ones that I have
or had were these three right here.
So it was basically these were used for comms.
This was basically just used for like a visual type of alert system.
And then when Heltec came out with this thing,
this new device allowed me to actually talk back.
And I'm going to show you now when this one gets a message.
So that's why I got the LilyGoes out,
because when this one gets a message,
I'm going to show you what it sounds like.
So this one, you can kind of just...
You have it. You can see it. You have to visually look at it.
You have to go through it and kind of
scroll through. But now we're getting an auditory thing.
So let's go back over here and I'm going to
do the same. I'm going to do the same test.
Let's turn this one off. So the only auditory thing we
get is from the one
right there.
So we'll just do tests.
So pretty nice.
Maybe 10 seconds long,
The break is, but what I like about it is,
Anywhere in my house, I can hear that auditory noise, knowing
that a message was sent across my private network, if that makes sense.
You can see this one's kind of showing the nodes in the area here,
as well as it'll scroll through messages. Like I said,
This now gives me that auditory presence,
and it'll show me all the messages, of course,
and everything that I need on my network,
and it'll also show me the locations of nodes.
It's got GPS on it as well, so it's got tracking abilities,
which is actually quite nice to have.
Yes, we have.
And the full touchscreen is also nice.
Like I said, the Lilygos were my previous comms devices,
but if I want these to be permanent fixtures
for things as a field node or something like that,
this allows me to now have a home base node
that has two-way communication.
Like I said before, I was just basically reading
and then I'd have to go to another device
to make that two-way communication happen.
Heltec came out with this,
which basically bridged the gap from all of us having to improvise,
essentially, with other devices and other things.
So.
So rounding out my comms network, Heltec, I appreciate it.
My foundational elements are essentially complete now
with having two-way communication at all points along the way.
So I love that.
That is awesome.
Awesome.
As I explore with this more.
And I put out more of my off-grid comms videos.
I will talk more about the things that I have experienced with it.
But for now, I wanted to kind of just give
a little introduction to it and kind of show it off.
And if you're looking to get into the off-grid comms game,
if you would, something like this is actually really cool.
It's a two-way communicator.
GPS is a two-way communication.
It's going to show you position location.
It's going to have nodes.
It's going to show you everything on there visually with a touchscreen.
That you would on any other type of device, if that makes sense.
And.
The keyboard, again, is built into the screen,
which is pretty freaking cool.
So you don't have to worry about any
keys failing or anything like that.
So I think that's actually kind of nice as well.
Anyway, that being said, it comes in a nice hard metal case.
So something that I think personally
is going to be kind of fun to play with.
I'm going to be playing with that and testing the distance
and its capabilities over time.
So I will report back.
But for now, I think it's pretty cool.
Why don't you let me know down in the comments below.
What do you think of an off-grid comms?
A type of a network, is it too advanced, is it too...
In the weeds, is it something that you'd rather not take part in?
Is it something that you love?
Is it a hobby?
Is it something that you like to geek out with as well?
I love off-grid comm stuff.
I love getting into stuff like that.
I love watching videos.
I love watching content on YouTube about it.
And I love learning as much as I can.
And I was able to kind of set up a pretty neat little network.
And if you're interested in seeing
my off-grid comm setup minus this new Heltec node,
Thank
I'll leave a link down in the description.
How about that?
Go check that out if you want to see, like,
kind of how I have my layered approach.
I know it's kind of...
So advanced material to go into if you're not really into comms.
It's a lot of stuff to kind of digest at once to kind
of figure all the stuff out and see how they integrate
and understand how they integrate without me explaining everything.
you.
I'm
So that being said, there's some foundational things in that video.
starting
You can check it out. You can kind of see how I start all
the way off with like the cell phone, the walkie talkie, and then,
you know, the LilyGO goes and then the Meshtastic network expansion
with having multiple nodes along the way.
to
Hop off of just I explained kind of all that stuff
speak
and how I have the layered approach for my area
and how I set it up for my specific situation.
now.
Let me know down in the comments below,
what do you think of the new
Heltec two-way communications device
with Wi-Fi and GPS,
already preloaded on the MeshTastic firmware
and everything ready to go.
Beautiful setup for you.
Just turn it on and get it all plugged up
to your network and go play.
Yeah, let me know down in the comments below.
If you like this video, give it a thumbs up.
Want more content like this,
subscribe for more.
And have a great rest of your day.