I Thought We Fixed This…

Farm Machinery
83 followers
Nov 13, 2026 #farming #agriculture
#farming #agriculture
▶Follow Sugar Bush Farms on Instagram
instagram.com/sugar_bush_farms
▶Follow Sugar Bush Farms on Twitter
twitter.com/sugarbushfarms
▶Follow me on TickTack (Tic Tok)
tiktok.com/@moofriender
(Edited by me, all by myself. Impressive right?)
AI Generated·May contain errors
That's not good. And of course it happens
when I'm punching a hole down the middle.
How's it going guys? Well it rained.
We took a two-day delay but we're back out here ready to
move and get some beans cut.
We did pick up and move one field two nights ago. I got it all opened
up just because the stuff at the farm is still kind of tough.
The variety is a longer day than
what we planted over here
and it wasn't that far to move so we just moved.
Yield monitor's saying the beans are 13%.
I haven't hopped out and checked them yet,
but I think we're going to do that here soon.
I want to check the ground and just make sure
because these are probably drier than what they were
when I first started here.
I don't see any splits.
Yeah, these are probably 13%.
I believe the monitor on that.
Not really any pods in here.
There's one right there, but it's fine.
A couple sticks.
That doesn't bother me.
A little bit of header loss.
See anything dripping out
of the machine.
Now I'm checking for any closed pods on the ground
that are coming out the back
and beans coming out the back.
So in this little square, there's only one there,
one there, two halves there.
So those are coming out the back that are split like that,
but they're light enough because they're split.
That little square, there's only two beans.
So I think we're pretty good.
I think I am gonna switch my chopper to low though.
It's in high right now from when we were doing some green stem stuff,
but I think I'll drop it to low.
So you're probably wondering, you know,
why swap the chopper to low from high?
Well, in theory, it should save on the variance because it's going,
I guess, in half as fast.
And then also, the crop's so dry,
it doesn't need to be absolutely decimated and chopped up like it is.
So that's why I'm doing that.
That's really about it.
It's pretty dry, so the stuff's going to get broken up pretty easily.
Okay, back to cutting.
Also, with the bigger pieces, I think it'll spread a little bit better
just because the bigger pieces are able to get flung further.
All right, well, we got another 40 down.
I think we're going to load up
and head back to where those 2.7s were on the home farm
and maybe cut those.
Hopefully, they're dried down enough.
You know, it's been three days since I've been over there,
so I forgot about that.
I'm not used to putting a step up.
I almost forgot about it.
I don't know why I recently started doing it, but I have.
All right, the header's popped off.
Combine will sit there for a little bit.
It's going to passively dust itself a little bit.
We're going to haul some grain in.
That's not good.
And, of course, it happens when I'm punching a hole down the middle.
So I was cutting along, cutting along,
and I heard the cutter bar start to choke up a little bit.
I was pushing it pretty hard,
so I thought I was just overloading the cutter bar.
No, it came off the shaft.
Put a decent dent there.
You can see the hole it dug when it fell off
and was digging in the ground.
Fix this real quick, hopefully.
I think I got these gloves.
We can just go back on there.
Heck yeah,
dude.
Ah, son of a, yep,
yep, I'm pretty tight.
At least the wind's behind me,
so I get covered in dust whenever the wind blows.
Hey, ratchet, I believe in you.
If anyone's ever believed in you more,
more than ever, it's me right now.
You got this, big name.
I want to say we had the same problem last year.
And then we fixed it.
Or, I thought we fixed it.
Did the same thing last time.
Chewed right through that bolt.
Hmm.
Yeah, that's just going to be to get us to the front.
That's all that's going to last.
How can I tell?
Should not have that.
That's not in the U-joints either.
All right, let's see if that thing makes it to the front.
All right, well,
we made it.
She's toast.
Hmm.
Look at that sunset, though.
Oh, and we got the moon. We got the moon too.
It's a nice night. It's a nice night, but we're
broken down. Oh, we'll make it. We'll be all right.
All right. It's the next day. I got some parts.
Let's put this thing back together.
Well, first things first, we're going to get rid of this
drive shaft. I think that yoke has a lot of play in it.
I don't know as if it's, I don't know as
if it's directly that PTO shaft's fault,
but we're just going to change it. It's been a good shaft.
Hmm.
It's just not worth it.
Not worth ruining another drive shaft.
There we go, just getting the hexes lined up was difficult.
New
used
PTO
shaft.
There we go.
Heck, who knows, maybe we get a new yoke for this end
and this PTO
shaft will still
be good for
something else.
Back to operating order.
Well, we're pretty full.
Rain cart's on its way, but I figured since we're full,
we might as well kind of hop out
and check how
the combine's doing.
One there, one there, four or five there.
Let's see how much header loss we got, though.
Yeah, I'd say we're not throwing anything out the back.
I think it's just the head.
Not losing anything down the middle.
I'd say we're set pretty good.
This thing's rock solid.
Here comes the cart.
Should I wait for just
your couple of passes you got?
Looks like the dew's going
to be setting in early today.
The dust is hanging in the air already,
and they're just starting to get a little tough.
These are also the beans that were too tough to combine last time.
That was probably...
Four days ago now, and I mean, they're going through good.
They were going through better about 40 minutes ago,
but, you know, that's the way she works.
We'll get her done tomorrow, though.
Hello?
Probably got another 30 acres done today.
We'll keep plugging.
Well, we're done for the night.
She's getting pretty tough.
I had a nasty slug just about plug the combine,
so we're going to quit while we're ahead,
and we don't have to pull soybean stems out of the rotor.
We'll be back at it tomorrow.
