Little Pigs and Big Equipment Beyond the Gate EP. 10
Aug 1, 2026
Little Pigs and Big Equipment Beyond the Gate EP. 10
AI Generated·May contain errors
Video Summary
AI GeneratedThe speaker begins the day by managing livestock, specifically moving farrowing pigs into settled areas. The focus then shifts to farm equipment maintenance, where the speaker installs dual tires on a combine using a bottle jack and blocks to ensure safety and stability. With the tires installed, the final step is preparing the header for arrival and testing.
Comments are disabled for this video.
All right, so beautiful Tuesday morning.
Had a couple pigs farrow.
We knew that they were close yesterday
and we didn't pull them into here
because we were moving all these huts,
but they farrowed this morning,
but we were able to snag them out of the hut,
get them settled in over here,
and then we went and separated another group
just to see if there's any that are close in there
and get them a little closer to the farrowing areas.
So anyways, got those separated,
got them loaded and put over into
kind of the catch pen over here.
And so yeah, so everybody should be settled down and good.
Like I said, we moved all these huts yesterday,
so everything's a fresh new spot
and everybody should be pretty happy.
And so yeah, now onward with the day.
Almost, almost got me.
Almost on video too.
That would have been fun.
Yeehaw.
A little bit of diesel out of my truck
and then there's the big black box of sockets.
Grab that too.
So if you want to find the right socket,
it fits these just perfect.
So what we're doing here
is we're going to drive up on these blocks.
So that way it's easier for us
to put the duals on the combine.
So getting this thing ready to rock and roll.
Let's go ahead and stick that one.
Okay, now start pushing it back towards me
as much as you can.
Watch out.
There's a big 20 ton gray jack in there.
Grab that, jack it up so that we don't have to
worry about that thing falling off.
Originally, I was going to put this up on blocks
and then slide the tire on there.
Then I realized that the inside dual
is all attached with the same bolts.
So if I would have done that,
then I would have had risked that tire coming off.
So basically what I got to do is jack it up,
pull that inside dual in,
pull out all the bolts,
put the outside dual on
and then put the bolts all the way through the whole thing.
So this way I don't have to worry about
the pressure of the weight of the combine
pushing the tire out.
So we just jacked it up with a bottle jack
and now it's elevated so that we can put the two duals on.
All right, so we just got the duals put on the combine.
Header's going to be here tomorrow.
We're getting it cleaned up now.
Going to kind of go through it, grease it,
do all the, check all the stuff.
Hopefully when the header gets here tomorrow,
we'll slap that thing on there, test everything
and then we'll be ready to go start harvesting.
So overall, everything looks really good.
I think it'll be smooth, but you never know.

