How Hard Can Building a Mailbox Be?

Neo Structure
3 followers
1 Video View·Nov 13, 2026
In this episode of Challenge Accepted, Jake gets tasked with designing and building a custom mailbox using sheet metal.
But instead of keeping it simple, Jake decides to design the entire thing, including the post, door, and flag. From figuring out mailbox regulations to working arou
AI Generated·May contain errors
Video Summary
AI GeneratedJake from SendCutSend takes on a \"Challenge Accepted\" project to design and build a custom sheet metal mailbox. He focuses on creating a robust, professional product that adheres to federal regulations while utilizing the specific manufacturing capabilities of SendCutSend.
I'm Jake with SendCutSend and it's time
for another challenge accepted where my team challenges
me to projects that I have no idea what they
are and so now it's time to learn their dirty
little secret. Thank you very much. Let's see here.
A sheet metal mailbox. All right well first of all
sheet metal that's going to be my bread and butter.
I already have a pretty cool idea on this. I think
we'll make it so that it's a whole entire stand, mailbox, flag.
Really really cool. Let's take it
to the classroom and get started with this design. Challenge accepted.
So designing a mailbox, the first thing I'm thinking
is that these are, I think, federally
kind of designed into a shape over the overall outside of the box
and how high it's supposed
to be off the ground.
So we're going to start by jumping into Google.
Understanding a little bit of those regulations,
I wanna actually design something
that can go in front of a house,
not just I did a mailbox, right, yay.
So go into Google first, then we'll take it to the board,
outline a little bit of the design,
and then go straight into CAD, so let's get into it.
All right, super easy Googling, actually.
We got straight to the sizes that I'm looking for.
There's three different main sizes,
a C1, C2, and C3, being small, medium, and large.
A C1 is 5.5 inches wide, 6 inches high,
18.5 inches deep, all the way to our C3, which
is our large, more rural.
It says mailboxes at 8 inches wide, 10 inches high, and 22 inches deep.
I live rural, so I'm going to go ahead and design one of these ones.
I kind of guessed right that there is a height requirement.
It's supposed to be 41 to 45 inches
from the street surface to the inside floor of the mailbox.
So let's take it over here to the board
and draw what we're going to do here.
So first of all, box size, you know that
and we have this post that's going
to come out of the bottom on our ground.
That 40, let's do 41 inches from the ground up.
So this measurement here, 41 inches,
our bottom is 8 inches wide, we have 8 inches,
we are going to be 10 inches tall,
and then our overall depth is going to be 22 and a half.
Now that's overall dimensions of the box
and now we can start talking about how
we're going to design this with only sheet metal parts.
Now the hardest two
things that we're going to end up doing out
of sheet metal are going to be
having a flange
or a hinge type design without adding a lot of extra parts.
What I'm hoping to do on this design is use only Senka-Sen,
so we're not going to have any external
parts other than the screws to put it together.
With that being said, I'm thinking of having a
little tab design here that we can hand bend
and have our door so that it flops open. And when we
close it, I am thinking about having magnets up there.
I think that magnets are always a really
cool trick. It makes it so that it's both fixed
and not fixed at the same time. We will have to
We'll have to add our little flag here as well.
I'm also thinking about it would be really cool
to have two different magnets there.
So when you put it up, it just kind
of sticks into a magnet spot and down.
Okay, let's draw the base out a little bit here.
Base is done. I guess we have one big decision
that we haven't talked about yet,
which is what material we're going to make this out of.
I'm actually going to probably make this out of a powder coated
Steel, I think aluminum is gonna be too lightweight.
It's not gonna have,
it's gonna have like a more of a cheap feel to it.
I think if we make it a more robust, heavier design,
it's gonna feel a little bit better overall.
Just feel sturdy when you're actually.
Putting your mail in there or taking your mail out.
I like a good sturdy mailbox, you know.
Okay, so we're going to go a new component here.
This is going to be the bottom of it.
74,000 miles steel.
I think that's a really good mix between the two.
It's going to be nice and robust.
And we're going to powder coat this so that it will
be good in the outdoor environment.
Okay, I have this idea actually.
Yeah, absolutely.
For the door, I think what we can do is,
like I said, I want to use Senka Sen.
I don't want to have to buy hinge.
So let's use hardware in a little bit of a tricky way.
To create like a pin design on each side.
So what I'm saying is if I have my door kind
of looking at it from an ISO view,
I'm going to make two tabs that stick up
that have a pin in it on both sides.
So the pins are going to be sticking out and the wall
on the outside of my box here.
This is a great drawing, guys.
I did really good over here and then it's all falling apart.
I can have a hole here on both sides as well.
So that door
If this comes up and over and then we screw it to our base, it's kind
of trapped in there now so that this door can't come in or out.
And we'll inset it a little bit so that when you open up the door,
it'll sit on this outside edge here,
making it so the door doesn't flop all the way down.
It'll lay kind of flat. You can slide
your boxes in there and we'll pick it up.
And then we'll figure out how to make
that magnet holding spot up here at the top.
Okay, let's go ahead and draw that up a little bit here.
So the first thing I'm thinking is that
let's just go ahead and make the top of this box here.
So I'm going to do an offset plane.
Offset plane is going to be 10 inches up.
Now the easiest way to do this
would be probably just to do a projection.
This is going to make it so that if I end
up changing the outside dimensions of the box,
they're going to change with me.
Okay. Now we have all three of our sides done there.
So we essentially have a mirrored process
from top to bottom now, bottom cap, top cap,
and then we're going to wrap around the outside
and make that final shell.
Now the problem is, is that I can't necessarily use CNC bending on
this particular design for the entire shell
because they're too deep of a U channel. So
we're going to end up having contact.
We're going to be crashing into the machine, not being able
Being able to complete the bends.
Within, with respect of the two flanges kind of coming together.
So with that being said is I think I'm going
to break this apart into subsections.
We have our top, our bottom cap,
we'll have our two walls and then we'll have a back cap
that comes over.
And then the door is going to make up
the front face of this and that's going to be
an independent part as well.
Once we have those designs done,
then I think we can start making it look a little bit more
cosmetically appealing.
It's kind of a really great way that I normally do a lot of my designs
is like just get bare bones.
What do you actually need it to do to match the intent of the overall
design? So in this one, we want a mailbox.
Let's just make a mailbox really plain. Don't get too
concerned about the overall look of it.
And then we'll add more to it to make it a little bit more
appealing. So let's go from there.
Now I have that done. Let's go in here.
We'll create another sketch on our outside.
One thing we did is we did change
this to the outside so let's move it back to
inside so that these are going to match up.
So these should be lined up from the front
pretty much the same exact part.
What I could have done is mirrored it but we want these to be
different in the long run because we're going
to be putting that pin design for our door on
the bottom and we might be adding some more
characteristics on the top. So I need them
to be kind
of two separate components.
I can't do what I
was thinking about doing.
If I do it where it's inset like this,
my problem is that I can't cut back that corner.
We're going to end up having a big gap underneath the bottom.
Yeah, so you're going to see a huge gap.
So if I sling it underneath the entire mailbox and then it opens up,
I can make it so that it hits there and then it closes.
So I'm trying to tuck it up underneath.
Okay,
so I'm
on
the
back.
The mailbox now, we have the door like pretty much roughed in.
The back of the mailbox is the part
that I'm worried about sealing it all up.
I think I'm going to make some on the sidewalls.
I'm going to make another flange in.
We're just going to make a back panel that on that
we would just do a lot of sealant on the inside.
So this whole thing kind of comes together.
If we had access, if I was doing this as a manufacturing engineer
long term, we're going to make thousands of these.
I would get tooling that would make this all one piece.
But since we're going to be kind
of fitting this into SendCutSend's envelope
and we're using them as our manufacturer,
I need to use their rules with that being said.
I think that's the easiest way to do it
is to make a third panel on the back.
So let's go ahead and add that in there.
I'm going to tighten up a little bit of my joints on my corner reliefs.
Now, this is something that typically is not necessarily recommended,
but on this one, I'm not really worried
about cracking in the long term.
I'm trying to keep my joints as tight
as possible so I have less sealant
in those areas.
So let's tighten up those joints, add that back panel on there,
and then we can start making this thing
look a little bit more cosmetically appealing.
Ooh, I like that.
Yeah, I can add that in right now.
Oh, that's why that one that you drew had a,
I thought you were just shitty at drawing a square.
I thought it was a bad drawing.
I was like, you said it was a bad drawing,
and I was like, yeah, it's a pretty bad drawing.
Makes way more sense.
Do we want it stylish or do we want functional?
We're an hour and five into the design right now.
Get fucked.
Okay, I think I got the design overall finished up.
On this one right here,
it's just a lot of different PEM hardware.
It's gonna be a big assembly on this one at the very end.
I'm really, really confident in it.
It's it's pretty robust.
We're going to have to do a little bit of welding on this
so we can play around with a couple of different techniques.
It's all going to be steel.
We're going to be powder coating in at the end.
So we're playing with a lot of different techniques
to come all together on this one.
One thing I am going to do before we jump all the way to SendCutSend
is I'm going to do some colors in CAD just to get the vibe
and the look to be correct before we send it over
to them and add those colors.
So what we'll do here is we'll go into one little last montage,
adding some color here, we can see that final look,
and then we'll push it over to SenkaSend
Sweet.
Send
it.
Challenge
complete.
