Engine Block Manufacturing Process | Cylinder Block | Green Sand Molding | Lost Foam Process |ESM)

Neo Structure
3 followers
9 Video Views·Apr 8, 2026
Hello viewers, welcome to Engineering Study Materials. Today we are going to
discuss about the production of the cylinder block and cylinder head. So
let's get into this video. Cylinder block is an element which consists of all the
parts which encloses all the engine parts inside it. It is a core of the
engine which houses nearly all the components of the engine to function
properly. The block is typically arranged in a v-shape inline or horizontally
opposed. Configuration and number of cylinders range from 3 to 16. This is the
block which is made by casting process and encloses all the components.
Functional requirements are it should last for a long time and housing internal
moving parts and fluids. It must be ease of service and maintenance and to
withstand high pressure created by the combustion process. And then material
properties. It should have high strength, modulus of elasticity, abrasion
resistance and corrosion resistance, low density, thermal expansion, thermal
conductivity, good measurability and castability of the metal alloy and good
vibration damping during the working. Manufacturing of the cylinder block is
based on the two ways such as green sand molding and last foam casting. So let's
we discuss green sand molding. Green sand molding is a basic method and it is the
oldest method of producing the cylinder block. In the green sand molding the
silica sand, clay and water are mixed together to form a mixture
of sand particle and it is placed on the mold and packed with the ramp and also
another box is also created like the same procedure and core are placed at
the required position and runner, riser, gate are cut in that and then the two
boxes are closed one above another and the molten metal is poured on the
pouring basin so that the molten metal enters the sprue and flows it on the
runner and it fills the cavity that we have prepared so that the part was
obtained. The term green denotes the presence of the moisture in the molding
sand. The green sand molding is still widely used in industry as material
costs are very low and most of the metals can be cast by this method.
Disadvantages of the green sand molding are once we prepared a one mold it is
used only for a particular product that is a single product only it cannot be
reused. The working time or the preparing time of the mold is also a tedious
process while the designing, the positioning of the core, runner, riser, gate
etc. In lost foam casting the polystyrene beads are melted and poured
into the mold which was prepared by designing to the required dimensions. The
pattern is made and the second process is the cluster assembly. Each pattern are
combined to form a cluster and provided with the pouring basin and the sprue so
that the molten metal is filled in this gateway and then the coating is to be
provided to the cluster assembly to withstand the strength and then the sand
is filled and compacted to provide enough strength and then the molten
metal is poured into this cluster assembly and settle for a long time to
solidify and then shake out process that is the assembly is taken away in this
process. It is called the lost foam casting because the polystyrene beads
gets melted and dissolved or entered into the sand particles once we pour the
molten metal. So in this method it becomes a more popular due to its
capability to produce near net shape components that is we can produce parts
which is appropriate in shape so that we can machine to get the appropriate or
the exact shape. It can provide tight tolerance for critical components and
reduce machine maintenance and cost. So this is a short video friends about the
production of the cylinder block so if you like this video please click the
thumbs up button and share this video to your friends to gain knowledge and
please subscribe this channel for more videos so thank you for watching
