Filament Winding | Process Explained | Polymer Matrix Composites | ENGINEERING STUDY MATERIALS)

Neo Structure
3 followers
12 Video Views·Mar 15, 2026
Hello viewers welcome to engineering study materials. Today we are going to discuss
about an amazing process for the processing of the ceramic or a polymer matrix composites
that is the filament winding process. This process is used to produce products
that is used for the storage of the gas and some of the particles etc. This filament
winding process consists of a cylindrical or a custom shaped mandrel is placed between the
two centers so that it can be rotated easily and a spool of filament is wound on this mandrel
while passing through a resin bath and a tensioner is used to
tension the filament to wound along the cylindrical mandrel. This filament winding process
involves a continuous filament of a reinforcing material wound on a rotating mandrel in layers
at different layers. If a liquid thermosetting resin is applied on the filament prior to winding
the process is called a wet filament winding process while if the resin is sprayed on this
mandrel it is called the dry filament winding. Then this process is useful because it has a
high fiber content that is more than 70 percent of its volume and good mechanical properties,
good strength etc. This is a filament winding machine it consists of a barrel fitted inside
the centers an arm which is used to to wound the filament bathed with the resin
and the tensioner is also placed so that the it is wounding is tightened by the tensioner.
Then this is the product that is can be formed it can be used as a pipe for the water supply
and gas storage cubicle etc. This filament winding process consists of a single filament
or a multifilament so that more strength or mechanical properties can be enhanced by
the use use of the multifilament process. It can be used for the round or cylindrical parts
the tape of resin impregnated fibers is wrapped over the rotating mandrel to form a part.
This winding direction can also improve its strength properties because if we wound this
in a single manner that is the from left to right in the along one direction it will be of
very low strength because if we pull that one side it will be easily to tear. If it is helical
in both directions its strength is increased so that winding direction may be hoop or helical
layers or layers of different material can be used. Then filament winding cost is about half
of the tape laying process and the productivity is also high and applications are fabrication
of the composite pipes tanks can also be produced and pressure vessels etc and rocket applications.
This is the simple diagram for the filament winding process whereas the continuous rowing
is fitted over the pulley and these pulleys is connected to the resin bath where the filament
fits on the resin bath and a tensioner is placed to tension the filament to wound along the
cylindrical barrel a motor is connected to the one side of this center so that the barrel can
be rotated and the filaments are continuously moved over the cylindrical barrel through the
resin bath. Then this also a process whereas the different material rowings are used whereas
the before process consists of a single rowing here we use two or more rowings because
we have to increase the strength of the final product and some of the mechanisms can be used
in this process such as a motor a drive chain mechanism a strokes are a stroke
quick return mechanism such as etc some of the mechanism can be used and the tensioner can also
be used to tension the filament over the cylindrical part. Then these are the winding
patterns hoop that is it will be of normal 90 degree rotation this is the simpler to the hoop
structure then helical helical means the curved one side over the and another side is the opposite
to the direction complete fiber coverage without the band having to lie adjacent to that previously
and polar polar means end to end in the one direction and next that is opposite the direction
this is the polar winding then demolding when the product is wound sorry the filament is wound on a
demolded to remove the mandrel the ends of the parts are cut off or a wax mold can be used
sometimes polystyrene can be used so that when it is heated the polystyrene is melted so that
the filaments are with the resin will be obtained as a final product then advantages are it can be
used for a wide variety of shapes very low scrap rate non-cylindrical parts can be formed after
winding and due to high hoop stress parts with high pressure ratings can be made the major
disadvantages are the programming can be difficult and some shapes can't be made with sharp corners
then applications are pressure vessels storage tanks pipes rocket motors launch tubes and
military applications this is the spherical component made from the filament winding process
this is used for the gas storage applications um let's think about how this is made
if we place a plastic or some other mold and rotated with the filament coated with resin
when then how to how we should take that mold think about it here they use the wax mold
so that when the wax mold is they wound with the filament coated with the resin
then cured then it is heated in the furnace so that the wax melts and the filament coated with
resin is only um is we we obtain so that the inside wax get melts off finally the gas can
be stored in these types of spherical products so this is a short video friends if you like this
video please hit the thumbs up button and share this video to your friends to gain knowledge
and please subscribe this channel for more videos so thank you for watching
