Every Combat Helmet Explained: from the Brodie of 1915 to the Ops-Core FAST RF1. Can a combat helmet actually stop a rifle round, or is "bulletproof" a myth? We break down what every major military helmet was really built to stop: shrapnel, pistol bullets, fragments or rifle fire.
Inside: the British Brodie "steel umbrella," the German Stahlhelm and its Stirnpanzer forehead plate, the American M1 steel pot, the Kevlar PASGT, the Soviet titanium Altyn, the Advanced Combat Helmet (ACH), the Marine Corps Enhanced Combat Helmet (ECH), the Army's Next Generation IHPS and the rifle-rated Ops-Core FAST RF1. You'll learn what backface deformation is, why "rifle-rated" has no single definition, and what the NIJ RF1 level actually covers.
⏱️ TIMESTAMPS 0:00 Brodie Mk I 0:46 Stahlhelm M1916 and the Stirnpanzer 1:51 M1 Steel Helmet 2:55 PASGT 3:59 Altyn 4:58 Advanced Combat Helmet 6:05 Enhanced Combat Helmet 7:35 Next Generation IHPS 8:54 Ops-Core FAST RF1
This video explores the evolution of combat helmets, tracing their development from World War I to the present. It highlights a critical distinction in armor design: the difference between protecting against fragmentation (shrapnel) and stopping direct rifle fire, explaining how materials have shifted from steel to Kevlar and advanced polyethylene.
Brodie M.K. Arne. In 1915, John Leopold Brodie reportedly stood still
while government examiners fired a .45 revolver at him.
He was wearing the steel helmet he had patented in London that August.
The choice of gun says a lot.
Artillery was the main killer in the trenches and when a shell burst
overhead it threw jagged metal fragments down onto the men below.
That was shrapnel
and the British simply called this the shrapnel helmet.
Brodie gave it a wide shallow brim that worked like a steel umbrella.
About seven and a half million were made before the war ended.
It was built for what fell from the sky,
not for a bullet coming straight out of a rifle.
Stahlhelm M. 1916, and the Sturmpanzer.
Those two little horns on the side of the German helmet
look like air vents.
They were also mounting points.
Dr. Friedrich Schwerd designed the M. 1916,
So that a separate steel plate could hook onto them
and cover the forehead.
The Germans called it the Sternpanzer, forehead armor.
The plate alone weighed about 1.2 kilograms,
more than the helmet it hung from.
At 5 to 6 mm thick,
it was described as effective against small arms fire from 50 meters.
But that much steel was too heavy for general use,
and the best estimates say only about 5%
of helmets could even be fitted with one.
So the plate went to snipers and sentries,
men who spent hours in one spot.
The helmet itself reached the troops at Verdun in February 1916.
The plate offered real protection,
but only to soldiers who could afford to stay still.
M1 Steel Helmet
By September 1945,
the United States had made more than 22 million M1 helmets,
Each pressed from manganese steel, just 1.1 mm thick.
It was approved on June 6th, 1941.
In testing, the prototype held off a .45 ACP,
the big, slow pistol round of the M1911, fired at point-blank range.
That result is where a lot of confusion starts.
A pistol bullet and a rifle bullet are different problems.
A standard military rifle round leaves the barrel
with several times the energy of that .45,
which is why the M1 couldn't reliably stop bullets at close range.
What it did well was catch fragments.
Post-war estimates put the number of men it saved from death
or injury at around 70,000.
Against a pistol, 1.1 millimeters of steel was enough.
Against a rifle, it was outmatched.
Pass.
D-ACE-ET.
A lot of people assume a Kevlar helmet is bulletproof.
The helmet that made the word famous was built for something else.
Kevlar was invented in 1965 by DuPont chemist Stephanie Kwolek.
It's a synthetic fiber that can be woven into fabric
and bonded with resin into a hard shell.
The U.S.
Army used it for the PASGT,
short for Personnel Armour System for Ground Troops.
It was designed in 1977,
saw combat in Grenada in 1983 and became standard issue in 1985.
Its job was fragmentation,
meaning pieces of grenades, mortars and shells,
usually smaller and slower than a rifle bullet.
It could not reliably stop a rifle round.
And troops nicknamed it the Fritz.
because it looked like the old German helmet
and the largest size weighed 4.2 pounds heavier than
the roughly three pound steel M1 it replaced.
ALTYN, the Altyn weighs up to four kilograms
that's close to nine pounds more than twice the smallest PASGT.
It was developed by the
Soviet steel institute NII Stali and adopted by the KGB in 1991.
It has a titanium shell up to four millimeters thick
and an armored visor that swings down over the face.
Russian special forces units like Alpha and Vympel
wore it for close quarters assaults.
All that metal suggests a helmet that could shrug off rifle fire.
The records point the other way.
The threat that gave it trouble was a pistol,
the Soviet Tokarev, firing a steel core round,
a bullet with a hard steel center built to punch through armor.
An improved version, introduced in 1997,
stopped that round at 5 meters.
According to Russian sources, the original had struggled with it at 8.
Advanced Combat Helmet.
A standard American combat helmet works under a short contract.
Stop a 9mm pistol round.
Stop fragments.
And when it stops either one,
don't let the inside of the shell push too far into the wearer's head.
That last condition is called backface deformation.
The bullet stays out, but the helmet still dents inward,
and the dent hits your skull.
The Advanced Combat Helmet was adopted in 2003,
It grew out of a special operations design called the MICH,
which cut away the PASGT's brim
so soldiers could wear radio headsets.
Under its 9mm requirement, the limits on that dent were 25.4mm,
which is 1 inch, and 16mm.
The Army still issues it to troops outside close combat units.
Rifles were never part of the contract.
When a rifle round hits a helmet and fails to go through,
it can push the shell 30 to 48 millimeters inward.
That's almost two inches.
Enhanced Combat Helmet
General James Conway, commandant of the Marine Corps,
kept hearing the same thing from Afghanistan.
In Marjah, Marines were being killed by snipers,
and the sniper's signature was the headshot.
So Conway pushed for something no production helmet had done before.
Stop a rifle round.
The first attempt went badly.
In September 2009, every vendor's design failed testing.
The material that finally passed was a polyethylene called Dyneema HB80.
It's a plastic made of extremely long molecular chains,
and it catches a bullet by stretching instead of shattering.
Seradine won the production contract in 2012.
The new enhanced combat helmet
Also gave about 35% better protection against fragments.
Then came the Pentagon office
that independently tests gear before troops get it,
known as DOT&E.
Its report confirmed the specified rifle round did not go through,
but across most of that round's effective range,
the inside of the shell pushed into the head beyond accepted limits.
The Armed Forces Medical Examiner's Office said
that kind of deformation could be lethal.
The testers and the medical community recommended against buying
and fielding the helmet.
To this day, the exact round it
was tested against has never been made public.
Next Generation IEPS
On February 12th, 2024.
The first 2,000 soldiers
of the 82nd Airborne Division started receiving a new helmet.
It protects against rifle fire with no add-ons, and the large
size weighs 3.27 pounds, the same as the helmet it replaced.
That earlier helmet, the Integrated Head Protection System, or IHPS,
was rated for pistol rounds and fragments.
To handle rifles, a soldier had to attach an extra armor plate
weighing two to two and a half pounds, depending on the source.
It was rarely used.
The next generation IHPS solved that by changing the material.
Older helmets used aramid fibers,
which stop a bullet by breaking one layer after another.
The new shell uses polyethylene,
which stretches and spreads the impact out.
Alex de Groot, the army's lead engineer for head protection,
compared it to a catcher's mitt.
The army plans to field 190,000 of them by 2028.
The army hasn't said which rifle round it was tested against.
And troops outside close combat units
will keep wearing the older advanced combat helmet.
Ops-Core FAST RF-1, what does rifle rated actually mean on a helmet?
There's no single definition,
because the US helmet standard from the National Institute of Justice
dates back to 1981 and covers pistol rounds only.
That leaves a lot of room.
Some helmets sold as rifle-rated were tested with the 7.62 NATO round
at 2,100 feet per second instead of its full 2,780.
That's about a quarter slower,
and it means the bullet arrives with only about 57% of its energy.
Gentex takes a different approach with the Ops-Core FAST RF-1
and publishes its numbers.
According to its spec sheet, a hybrid shell of carbon,
polyethylene and aramid, 10.16 mm thick,
stopped a 7.62 NATO M80 ball round at 2,780 feet per second,
the speed it leaves the barrel.
It also stopped the 7.62x39 fired
by AK pattern rifles at 2,380
and a 5.56 M193 at 3,250.
Those three rounds match RF-1,
the lowest rifle level in the Institute's newer 2023 framework.
That level leaves out steel core rounds like the Army's M855
and anything armor-piercing.
The spec sheet also lists no backface deformation figures,
so the most complete answer to the question in the title
comes from the manufacturer itself,
tested against ordinary rifle ammunition,
with no public number for how far the shell pushes in.