Amazing Upscale Makeover for a Boring Filing Cabinet

Trash To Treasure
3 followers
This cheap looking (but not ACTUALLY cheap... at ALL) office furniture is everywhere! Thrift stores, online marketplaces, yard sales... We all need it. But not all of us love the look of it. In this video, I'll be creating a totally custom and unique version of a FB marketplace two drawer filing cabinet for our office/studio. We have a lot of warm tones in the room, including a lot of walnut, so I wanted something to work WITH the darker wood while having a lighter look overall.
#furnitureflip #refinishing #furniturerestoration #officefurniture #budgetfurniture #transcendfurnituregallery #furnituremakeover #furniturerepair #furnitureflipping #upcycledfurniture #upcyle #filecabinet #Upcycling #Zerowaste #Diy
AI Generated·May contain errors
This video is sponsored by Skillshare.
Ah yes, we have all seen pieces like this.
In thrift stores, on the side of the road.
I picked this one up on Facebook marketplace for $40.
We really needed a new filing cabinet
and I wasn't about to go spend $1500 on a solid wood one.
It's just a filing cabinet.
If you're wondering why it's in pieces, with what I want to do to it,
it's going to be easier if it's taken apart.
Plus there were a couple spots that needed some
repairs. I'm going to be adding some new walnut handles,
making custom trim, doing a paint
technique I've never done before,
and you will not recognize this filing cabinet in the end. Stay tuned.
My name is Angie and I refinish furniture.
Sometimes I paint and sometimes I don't,
but I always do what I can to save old pieces from the trash.
Welcome to my workroom.
Right, so let's get into this.
If you've never handled one of these cabinets before,
then you don't know that they are incredibly heavy.
That can make putting them together
and taking them apart, doing repairs like I'm doing in this video,
a little bit tricky on your
On your own, but I'm going to do my best.
The reason this particular side panel
is not attached is because it was broken. Basically
these cams need to slide back in and then
these two pieces need to clip in together somehow.
I initially considered putting wheels on this but opted
to keep the self-leveling feet which is what
these are. The reason I popped this out
though is because all but one were actually totally seized.
I couldn't turn them so my only option was to push them out
and try to release them after.
Nearly all of this kind of office furniture
is put together with these cams here,
and they tend to work really well for a while, but often come loose,
and that's what happened with this one.
You can see there's actually a little bit of
tear-out around it,
so what I'm going
to do to fix that is mix
For some reason with this particular tube of epoxy
the white part always gums up and I have to
unblock it and then it's really hard to get out
up a little bit of epoxy.
so I'm not sure it was just a defective one. The
epoxy itself seems to work fine it's just getting it out
of the tube that's been a hassle.
I really like using epoxy on particle board and pressed wood,
which is what this is made
of.
And in areas where I'm trying to fill larger voids,
I like to add a little bit of sanding
dust in with the epoxy.
You have to be careful, like
in a situation like I'm doing here, that you don't put too
much in the hole itself
because you'll end up pushing your cam screw out too far.
But I basically just put a little bit in,
insert the cam screw, and then build it up
up around the cam and then just let it sit until it's hard.
Once the epoxy has completely dried,
I can put these two pieces back together.
Now like I said, this is a little bit tricky
to do on your own, and you can see here I'm
just reaching down in because I needed to turn
that locking mechanism a little bit to
allow the cam screw to enter completely.
Once I did that, I was able to clip the side in,
needed a little bit of coaxing down into
the
clip.
This is now nice and sturdy.
All I have to do now is turn these to lock the cam in place,
and then I can flip this
Just up and put the top back on.
You'll see also with the top there is a cam screw missing.
When I removed the top I actually took that particular cam screw
out because it was loose and I knew I needed to secure it.
These usually have a little bit of wiggle room
but it was just way too much with this one.
It had to come out.
So I'm just adding a little bit of epoxy to set it in that hole
which has been stripped
and once that dries that'll be totally fine.
Before I flip the top over, I give it a quick cleaning.
While I am going to be painting the outside of the cabinet,
I'm not touching the inside. There's no point. I'll never see it.
And a little finger jam for good luck. That felt amazing.
And now I can secure the top back in place.
The addition of the top made this quite heavy,
so I had Andrea help me flip it over.
And then she decided to pitch in, get these leveling feet moving,
and then I can add some epoxy and pop these back into place.
I decided to add a little bit of beeswax to the bolt
so that this wouldn't happen again.
You could also use like a silicone lubricant or something.
This will work just fine.
I missed all that because it wasn't focusing.
Between Andrea
and Nacho,
there's never
a dull moment,
I'll just say
that much.
In case you haven't picked up on it yet, I'm the quiet one.
So now I'm giving the outside of the cabinet a really good cleaning.
I'm going to be painting this and even
though I'm going to be scuff sanding I
need to make sure that there's no weird cleaners
or waxes or polishes on this.
That will prevent my paint from adhering properly.
So there's a locking mechanism on this but there's no key
so I either have to figure
how to find a key or have one made
or just replace this lock but for now I'm going to
take it out and when I finish the piece I'll pop it back
in and then figure out a key later.
I'm doing a scuff sand here of about 150 grit,
high enough that it doesn't leave deep gouges
and low enough that it'll give the paint
and primer something to grip to.
When you're doing these, make sure you get
that little plastic trim around the edges.
It's rounded and it's a prime spot
for paint peeling off if you don't scuff sand that as
well.
So in the brief moments that I'm not catering
to Nacho's every need, you guys know that
I love continued learning and leveling up,
so to speak, in some of my skills.
But that extends beyond just furniture.
I have many different hobbies and interests.
I found this class by Brooke Glasser called Make
a Living as an Artist Strategies for
Crafting Your Creative Business.
This is the perfect class if you have some sort of hobby
or interest that you've been wanting to
turn into a business but you don't really know where to start.
And Skillshare is actually full
of classes just like this.
You could pick pretty much any business you can think of and there'd be
something here that would relate to it.
I'm often looking up Final Cut Pro videos, videos about
YouTube, and it's fun to just go through
and actually save some to watch later. You can make
You can make different lists, like playlists.
For the different types of videos you want
to watch, and come back to them later.
Thinking about the future can be scary,
especially if you're creative like me.
Skillshare teachers can take you step
by step into building the life you want,
whether that's breaking into a creative industry,
finding ways to create more financial stability.
Skillshare can help with all that.
The first 1,000 people to click
on the link in the description box below
will get a one-month free trial of Skillshare.
If there's something you've always wanted to learn, now is the time.
Once the piece is scuff sanded and wiped down,
I can get ready to prime.
I'm going to be using this BIN primer,
and I haven't used this in a very long time and
there's not a lot left in this can,
and you'll see how that's going to be a problem for me.
It's a bit gunky on the bottom,
so I'm trying to stir it as best I can, but I already know
there's going to be clumps in it, which is kind of a pain in the butt.
This is my first time using these Dahlmeister rollers.
They're so soft and come highly recommended,
so I'm going to give them a try here.
Within three swipes of the roller I've got little chunks
of primer that I need
to pull out. You can avoid this by using
a strainer like a cheesecloth. I do that
on occasion but I didn't here
and I probably should have.
If you've been following my work for a while,
you know that I pretty much only use Fusion
Mineral paint.
I don't prime that often,
and there are some folks that prime every single time, and that's
totally fine.
I always say, when in doubt, prime, but for me,
I find that Fusion Mineral paint adheres
really really well, generally.
So unless I'm working on a piece that is extremely slick and smooth,
or has patched and repaired areas
or is a wood that has a tendency to have bleed through,
I don't often prime.
I'm choosing to here one because of the surface
and two because I'm going with a light color.
Priming first when you're using white
or something off-white saves you paint and
saves you time. A primer is expensive.
I had to go get some and this is what happened.
I'm going to go to the hardware store to get some more bin primer.
Thankfully, I don't use it very much
because the price has gone up a little bit.
And by a little bit, I mean a lot!
What is in this stuff?
Gold?
Silver?
I saw the price of the small can and nearly fainted.
So I thought, okay,
well maybe it would be better for me if I just get the gallon jug
because normally it's more cost-effective that way.
And I looked at the price of that.
Sorry about the silly filter,
that was actually one of my YouTube shorts over on my other channel.
So there are several really nice colors from Fusion Mineral Paint
in the sort of white, off-white category.
Lamp White I found a little bit too cool,
Casement was a little bit too stark, Raw Silk was too yellow.
Goddess Ashwagandha is actually really nice,
but it was just a little too brown, so I opted for Cashmere.
And when you see it go on here against
the primer it's gonna look very putty-like or almost beige.
But when it's dry it actually reads as this beautiful off-white.
My little office slash studio area where this is going to be going
is very warm. The color on the wall is like a very pale sage green.
We've got some aged
pine in here, beautiful walnut, so a lot of really warm colors.
So I wanted a warm white.
All right, let's talk about drawer pulls.
These are the pulls that came with it and they're not terrible
actually. I do like the shape.
I might be inclined to spray paint them gold or something or just
touch them up but I'm going in a bit of a different direction.
A while back I purchased some of these
walnut pulls from Lee Valley and I still have some left.
These are made of solid walnut.
I think they're a really cool shape for the right piece and I like
that they have the inserts in the back
for threaded machine screws rather than screws.
I also have these walnut offcuts from a cabinet maker
and I got these from Facebook Marketplace.
I think it was like 10 or 15 dollars for a whole bunch of them
and while not every piece is perfect,
I can definitely do stuff with this.
So check Marketplace if you're looking for wood at a
discount. Quite often you can find people
that have scraps pretty cheap.
Even though these pulls come unfinished, I do like to sand them.
And I'm also going to sand down these offcuts.
Now if you're wondering what I'm doing with these,
I want to try to add some trim.
There's a lot of walnut in my little studio office area,
so I kind of want to incorporate
that into what I'm doing here.
I don't really know what that's going to look like yet,
but I started off by cutting four
pieces that were the same height as the drawer faces.
To help these tie into the handles a little bit more,
I'm going to curve the ends.
This isn't going to look identical
because the handles themselves are rounded, like all the way
over, and this would just be rounded on the end,
but I think it'll help it blend in a little bit
more. I'm going to be using
the belt sander for this.
Before I start,
I just want to clean it up
a little bit.
I could have used
a scroll saw to sort
of trim these down
a little bit more before
coming to finish up with the belt sander,
but I knew that this would go pretty quickly.
I have them pretty well shaped.
I'm just going to go ahead and sand them smooth,
including trying to smooth out this little round over area.
Again, it's not exactly the same profile
as the pulls, but it's close enough.
I'm going to be
sealing the walnut
with Odie's Oil.
This is the
Universal Oil.
I love this finish
on walnut.
Here we are these beautiful walnut pieces
and let them sit for probably about an hour and then came
back in and wiped off all of the excess
and this is a very important step with Odie's Oil.
Absolutely have to get all of the excess oil off.
A lot of people don't like when you can see the heartwood
and the sapwood at the same time on a piece
Look at these areas that are darker and areas that are lighter.
I personally love it, especially on walnut.
Even though I like symmetry in most cases,
I just find the variation in the wood grain so beautiful.
So Andrea and I played around with these pieces
for probably close to 15 minutes and came up with
dozens of scenarios. These were our favorites
but no matter how we did it there just seemed to be
still these big areas of just plain white
and considering the rest of the cabinet is also
plain white there wasn't enough interest.
So what I think I'm going to do is set it up just like this
and have these edges and give some texture to these side pieces here.
It'll still be the plain paint in the middle,
but I'm going to try something a little bit fun
on the outside.
So to do this, I need to mark where I want my wood trim to go,
which will also dictate where
the textured part will meet the plain part.
And then I can just
use some painter's tape along
that line.
And I'll do this for all four sections.
And of course,
Nacho has to come and do his midday inspection.
So the reason I haven't dealt with these holes yet
is because I wasn't sure exactly
where I wanted the poles to go.
I decided to have them up at the top
like they originally were,
but down just a little bit
so that they weren't right along the edge.
And the easiest way for me to do this
is to put some masking tape on
and use this punch
to mark where the holes are.
Then I can just transfer the tape to the drawer face,
making sure that it's equal on both sides.
I'll be sure to measure and make sure it's straight.
And then I can use that same punch
to mark where the holes need to be for drilling.
This is so much faster and easier
than trying to use a ruler and measure everything.
Quick
and easy.
This is actually my first time trying this fusion embossing paste.
I don't think it's dissimilar to what I used to use
when I would do canvas paintings with
acrylic.
There were a ton of different mediums,
so I'm treating it kind of like that.
To be honest, I don't know if you're supposed
to mix this with paint, but that's what I'm
doing.
I just added a little bit of that same color
that I painted the cabinet, because I don't
necessarily want crazy rigid lines when I do this.
I want subtle texture, so I mixed it up a little bit.
This rubber comb is the secret to creating what I'm about to create,
and let me warn you in advance here,
my camera betrayed me a little bit with these next few clips.
It was a lot of light coming in from the window,
which I'm standing right next to,
and it kind of washed out the highlights a little bit.
So it's going to be a little bit hard
to tell what I'm doing as I'm doing it,
but don't worry, you will definitely see
in a few minutes the results of what I'm doing here.
Adding that little bit of paint
to the mix here made it possible to actually
brush this on. Kind of like a thick paint.
And then all I do is carefully drag the rubber
comb across what I've just
done while it's still wet,
and then remove the tape.
And again, I am so sorry about these clips.
I really need a camera person.
Once I have these textured areas done,
I used my heat gun to speed up the process just slightly.
I didn't dry them all the way with it,
but I just needed to make sure that when I moved
on to drilling here, that if a piece
of dust happened to fall on it, it wouldn't stick
to it.
Once I have these drilled out,
I can fill the old holes and do any little paint touch-ups
that I need to do, and add my new handles.
You can see it's a bit later in the day now.
You can actually see some of that texture.
I did it by hand so obviously it's not ruler straight.
You could fashion some sort of a guide
to help keep your rubber comb straight
while you're trying something like this.
I didn't mind the slight wave here and there.
It kind of reminds me of the same sort of texture
you get when you run like a straw broom over paint.
I kind of like that look.
So now I need to attach my walnut trim
and I drilled two holes where I need the screws to come
up from the bottom counter sunk
so that they don't interfere with when I go to attach the drawer face
to the drawer box and the easiest way I've found
to do this is drill your holes put two small screws
up so that they just barely stick out make sure
your trim piece is straight and then just push
down on those little screws and what that does I know it's
a little bit hard to see here probably
on the camera but it creates two little holes
exactly where you need the screws to go.
And I can just take my drill
and very carefully drill down about halfway through,
remove the sawdust, and then I can literally screw these to the drawer.
As I mentioned, I needed to make sure
that these screw heads were countersunk a little bit
because this whole panel attaches to the drawer box.
And there's a spot here and then a spot here.
All in all, there's actually eight screws
that hold this to the drawer box.
And there you can finally get a better view of what
that subtle texture looks like and I love it.
So now I just need to repeat the process for the other drawer
and I am in the home stretch.
So these are
the products
I used here.
I used
an all-purpose
cleaner,
bin primer, I used Fusion mineral paint in the color cashmere,
And one of these Stahlmeister rollers.
I used the Fusion smooth embossing paste mixed
with a little bit of paint
and just painted it on with one of these brushes.
This is from a pack I got on Amazon.
They're great brushes for a good price.
This graining tool actually comes in a kit with a few other ones.
I will link it down below.
I used Fusion beeswax to seal the paint and the Odies Universal Oil
as well as a Mirka Merlon pad to protect the walnut.
There are countless ways that I could have recreated
this cabinet I could have
built a base for it. I could have put it on wheels.
This would have looked amazing
with the walnut trim if I had done it in a dark navy blue or black.
Or even a light green or gray.
Like, the possibilities are endless.
If you have one of these cabinets and don't like looking at it,
which is the case for a lot of people,
there are things you can do.
Just because it's not real wood or veneer
doesn't mean you can't paint it or add trim to it
and do some things to make it more interesting and unique.
Thank you so much for watching.
I hope you enjoy the reveal.
And I will see you next time.
