DIY Table ~ Scrap Wood Furniture ~ Dropleaf Table Tutorial ~

Handicraft
131 followers
In today's video I'll be building a piece of furniture in our shop.
So I'm in our living room and what I need is a small table like an end table to place between
my two recliners behind me here and I've looked everywhere for one like in thrift stores. I don't
want to go buy something new and I just can't really find what I need so if I can't find it
I'm going to try to make it. So join me as I work in the shop today. I have these large round
wooden signs that didn't sell in the antique mall from a couple of years ago and I think I can use
one of these for my tabletop. What I have in mind is to make a drop leaf end table. I like the
vintage look of that and these measure around 28 inches and I think that would be perfect for a
little drop leaf end table. So first I have the tedious job of removing the decal that was on
here. It's actually a little bit harder than I thought with all the picking but it's definitely
removable. So of course what I need to do here is remove two pieces from the circle for my little
drop leaves and I'm just kind of eyeballing to see how big I want them to be. Since I don't have a
straight edge to go by to cut off my pieces like I can't use the table saw to do it I'll have to
use the circular saw. So here I'm setting up a guide so I have a place to run my saw along you
know to make a perfectly straight line and after I have the first piece off I'll be able to use the
table saw being that I have a straight side to go by. John was also in the shop doing some work
as I was you know working on this project so he helped me hold things a bit as I made my first
them out. I'll just make a smaller table and I don't have a lot of space to you know put it in
and I think you know again either way would look okay but I'm going to go for the straight sides.
I always like to sand my pieces before putting things together it's just a lot easier that way.
of furniture blindly like this you know without any measurements to go by I like to do it section
by section that way I can kind of hold it up eyeball it see what my next piece like what size
you know in this case the skirting and the legs should be. It's just easier for me that way to
kind of get that visual of things instead of you know trying to map everything out before I even
start making. The next step of course is the skirting and I want it to be three inches wide
and I want it to set in at least a couple inches from the edge of the tabletop and being that this
is a drop leaf table I of course need to install little boards or something to hold my leaves up
and in this case I'm going to cut a notch into the skirting that way I can slide little boards
of wood in there just you know be able to slide back and forth to hold up the leaves and this will
want to make pocket holes in this case to you know fasten the skirting then to the bottom of the top.
I think I'm going to try to use these spindles for legs. First I thought maybe they're too skinny
but I think being that you know the size of the top isn't just overly big I think it'll look okay
and not you know too top heavy. I do want the legs to be slightly at a slant instead of just
straight up and down so I'll have to cut slight angles to get this. I'm also planning on adding
a bottom shelf to this piece and basically just gluing and pinning or nailing everything. The
only thing that will get screws is once I fasten the skirting and the legs part to the top. I mean
this piece isn't something you know that people will be sitting on so glue and pins definitely
will hold everything. Now if you want to make a piece of furniture that is a lot stronger you
know of course using screws would help but it's just so easy to you know just use the nailer.
The top is going to be painted white. I'm using my Do It Best brand paint satin sheen. The color
is bright white and we often have a little roller and pan going out in the shop you know painting
signs and such so I'm just going to use that. We always keep it covered tightly so we can reuse it
but it's really handy to just grab and roll something like this. For the base I want it to
be a warm gray color and I don't really have any on hand so I'm going to try to just mix some
together. I have some gray paint and some tan paint see if I can find that balance of a nice
for it. I'm sure there's probably 10 different kinds of colors in here being that the tan and
on one of my drop leaves and I've talked about this product before but it's simply amazing.
Basically you just mix the two ingredients together and pour it into the mold and within a
couple minutes it starts to harden which I just love that about it. There's no waiting on it. It
doesn't have to cure for hours. It's ready to pop out of the mold and you can glue it onto your
surface and I get all of these products from Patterson Art Studio. I've talked about them
before on here but they have anything along this line and everything. They have all kinds of
different decor transfers along with many other products if you enjoy being creative and making
things so make sure to check them out. I'll have their link down below in the description box.
that design that I put on the drop leaf to stand out more so I'm going to apply this chalk paste
to it and then rub some of it off. Hopefully it will work. I've never used this product before.
It is also a redesigned product and it's also from Patterson Art Studio and the color here is
Gotta say I love how it looks in here. I mean no it's not perfect. I'm very far from a professional
furniture maker but I feel like I kind of got what I was looking for. I added these pretty herb
pillows to the recliners and a local artist Cheryl Miller actually created these designs. You might
remember them from a couple years ago but we do still stock them on the Etsy shop in case you're
looking for something like this but I think they're so pretty. And I have one more thing I
want to show you a new item for the Etsy shop. We have these adorable little egg banners and I have
a couple of them with me here but we have a number of different designs and these of course would be
so fitting for the upcoming Easter season. I think they turned out so cute so make sure to check
those out if you're looking for something like this. And as always I hope your day is going great.
Thanks so much for watching and I'll see you in the next one. Bye!
